Instruction Manual

15. Adjust the beam until the red alignment light on the back of the unit is on. This can be done
by aiming the photocell and directional laser at the centre of the reflector. Once aligned, the
laser will stay illuminated for an additional 5 seconds before turning off.
16. In windy environments, ensure the unit is remains aligned when wobbling the unit slightly
side to side.
6. RUN YOUR SESSION
17. Press Start on the home screen and proceed to the Session Set Up screen.
18. Choose your options and team for the session. If you haven’t created any of your own teams
yet using Smartspeed Online, you can use the default team.
19. Once you have configured your settings, press Start to start testing.
20. When you have completed your testing, press Stop to end the session and view the results.
7. PACKING UP AND CHARGING
To turn off your PRO timing units, press the power button on each unit until all LEDs turn off.
We recommend that you recharge your PRO units prior to every session. To charge the units,
connect them to the charger provided. When charging the red charge light under will blink. When
fully charged, only light will remain solid.