FUSION MS-BB300R ® BLACK BOX ENTERTAINMENT SYSTEM OWNER’S MANUAL ® ENGLISH FUSIONENTERTAINMENT.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Getting Started 1 Device Controls Remote Screen Assigning the Remote to a FUSION Stereo Adjusting the Backlight Brightness and Contrast Adjusting the Volume Selecting a Source Switching Between Remote Control Mode and NMEA 2000 Repeater Mode 1 1 1 1 1 2 Bluetooth Device Playback 2 Connecting a Compatible Bluetooth Device Selecting a Different Bluetooth Source 2 2 USB, MTP, and Apple® Device Playback 2 Connecting a USB Device Controlling Music Playback on a USB Flash Drive MTP Fil
Getting Started Button Function • BT or USB: Select to skip to the next track. • AM/FM: ◦ Auto or manual tuning: Select to tune to the next station. ◦ Hold for faster station skipping in manual mode. ◦ Presets: Select to change to the next preset. • AUX: Select to increase the gain for the connected source. • SIRIUSXM: Select to advance to the next channel. • DAB: Select to advance to the next DAB station in the ensemble.
TIP: To control all zones at the same time, press the dial until all zones are highlighted. Selecting a Source 1 Select . 2 Select an option: • Turn the dial to highlight a source. • Select repeatedly to highlight a source. 3 Press the dial to select the source. Switching Between Remote Control Mode and NMEA 2000 Repeater Mode By default, the remote control is in remote control mode when you power it on, allowing you to control a connected FUSION MS-BB300 device.
Connecting a USB Device You can connect a USB device to the USB port on the stereo. 1 Locate the USB port on the back of the stereo. 2 Connect the USB device to the USB port. 3 Select the USB source. Controlling Music Playback on a USB Flash Drive 1 Connect a compatible USB flash drive or media player to the stereo. 2 Select the USB source. 3 Select . 4 Select the name of the USB drive to view the file structure of the USB flash drive or media player. 5 Select a song to begin music playback.
Activating a SiriusXM Subscription Scanning for DAB Stations Before you can activate the SiriusXM subscription, you must have the Radio ID (Locating the SiriusXM Radio ID, page 3). 1 With the SiriusXM source selected, tune to channel 1. You should be able to hear the preview channel. If not, check the SiriusXM Connect Tuner and antenna installation and connections, and try again. 2 Tune to channel 0 to locate the Radio ID. 3 Contact SiriusXM listener care by phone at (866) 635-2349 or go to www.siriusxm.
Connecting an Auxiliary Device You can connect various auxiliary devices to the stereo. These devices have either RCA connectors, a line output, or a headphone output jack. 1 Locate the auxiliary connectors on the stereo. 2 If necessary, connect an RCA-to-3.5 mm adapter cable to the auxiliary device. 3 Connect the auxiliary device to the RCA connectors on the device. Additional Settings The available settings vary based on the source selected.
Zone 2 Settings The stereo keeps locking up when connected to an Apple device Select > Settings > Zone > Zone 2. Enable: Enables and disables the zone. Link to Zone 1: Enables zone 2 to use the same volume settings as zone 1. Balance: Sets the left and right balance of the zone. Volume Limit: Sets the maximum volume for the zone. Set Zone Name: Assigns a name to the zone. • Press and hold the power button to reset the stereo. • Reset the Apple device. Go to www.apple.com for more information.
Advisory Description Channel Not Available The channel you requested is not a valid SiriusXM Go to www.siriusxm.com for more information about the SiriusXM channel, or the channel that you were listening to is channel lineup. no longer available. You may see this message briefly the first time you connect a new SiriusXM Connect Vehicle Tuner.
Index A AM 3 Android device 2, 3 Apple device 2, 6 auxiliary input 5 B backlight 1 Bluetooth devices 2, 5 D DAB 3, 4 device, registration 6 F FM 3 I iPod 5 K keys 5 L language 5 M media player radio 4 remote control 4 MTP 2, 3, 5 N NMEA 2000 2 P presets 3, 4 DAB 4 product registration 6 R radio AM 3, 5 FM 3 SiriusXM 3, 4, 6 registering the device 6 remote control, media player 4 S SiriusXM 3 Satellite Radio 3, 4, 6 SiriusXM Satellite Radio 4 source 2 speaker zones 1 T tone 5 U USB 2, 3, 5 flash
FUSION SUPPORT New Zealand Australia Europe USA Pacific 09 369 2900 1300 736 012 +44 (0) 370 850 1244 623 580 9000 +64 9 369 2900 ® FUSIONENTERTAINMENT.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Getting Started Button Function • Media player or USB: ◦ Select to skip to the next track. ◦ Hold to fast forward the current track. • AM/FM: ◦ Auto or manual tuning: Select to tune to the next station. ◦ Hold for faster station skipping. ◦ Presets: Select to change to the next preset. • Aux: ◦ Select to increase the gain for the connected source. • Select to advance to the next channel when in SiriusXM mode.
Selecting NMEA 2000 Information to View Change PIN: Changes the parental passcode. Before you can view NMEA 2000 information, you must set the remote control to NMEA 2000 repeater mode. 1 Select > Settings > NMEA Monitor. 2 Select the NMEA 2000 supported data sentences to view. You can view information only from sensors connected to the same NMEA 2000 network as the remote control. 3 Select to exit the menu.
Discoverable: Allows the Fusion BB300 stereo to be discovered by a Bluetooth smartphone or media player when pairing. Remove Device: Removes a saved, paired Bluetooth smartphone or media player from the Fusion BB300 stereo. Volume Control: Allows the volume of this zone to be controlled by another amplifier or stereo and provides a fixed line-level output when the option button is cleared. Set Zone Name: Assigns a name to the zone.
• To avoid interference with a magnetic compass, the device should be installed at least 203 mm (8 in.) away from a compass. ® FUSION MS-BB300 Installation Instructions Mounting the FUSION BB300 Device ® Important Safety Information WARNING Failure to follow these warnings and cautions could result in personal injury, damage to the vessel, or poor product performance. See the Important Safety and Product Information guide in the product box for product warnings and other important information.
Wire Function Wire Color Notes Ignition Red This should be connected to a separate switched 12 Vdc connection, such as an ignition bus, to turn the device on and off. If you are not using a switched 12 Vdc connection, you must connect this to the same source as the yellow (power) wire. Amplifier on Blue/white This is connected only when using an external amplifier on ZONE 3 and on SUB OUT (optional). Mute Brown/white When connected to ground, this mutes the audio or switches the input to AUX2.
The subwoofer port on the device outputs a mono line-level signal from both RCA connectors. The port output audio level is linked to ZONE 3. • If your subwoofer amplifier has two RCA input connectors, you should connect both connectors to the device. • If your subwoofer amplifier has one RCA input connector, you can connect it to either subwoofer output RCA connector on the device, because the two RCA subwoofer outputs are parallel.
4 Select a manual. © 2015–2017 Garmin Ltd. or its subsidiaries Garmin®, the Garmin logo, and the FUSION® logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Fusion and FUSION-Link™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. Apple®, the Apple logo, iPod®, iPod touch®, iPod classic®, iPod nano®, and iPhone® are trademarks of Apple Inc., registered in the U.S. and other countries.
LIMITED 3 YEAR MARINE CONSUMER WARRANTY Garmin New Zealand Limited, trading as FUSION Entertainment ("FUSION') warrants that this FUSION Marine product is free from defects in material and workmanship, according to the following terms and conditions: • The limited warranty for the FUSION product purchased extends to 36 months beginning on the date of purchase of the product • The limited warranty extends only to consumers who purchase the product in one of the countries (or areas) set forth on www.
