Owner's Manual

Discoverable: Allows the Fusion BB300 stereo to be discovered
by a Bluetooth smartphone or media player when pairing.
Remove Device: Removes a saved, paired Bluetooth
smartphone or media player from the Fusion BB300 stereo.
FM and AM Settings
In addition to changing stations, you can manage your preset
stations using the remote control.
From the FM or AM source, select > Presets.
Save Current: Saves the currently playing station as a preset.
Remove Preset: Allows you to remove one or all preset stations
from the device.
General Settings
Select .
LCD: Sets the brightness and contrast.
Power Save: Enables and disables the backlight power-save
feature.
Key Sound: Enables and disables the sound.
NMEA Monitor: Sets the data to view, the data display cycle,
and the units of measure for NMEA 2000 data.
Language: Sets the language on the remote.
Tuner Region: Sets the region used by the FM or AM source.
Tel Mute: Sets the behavior of the mute wire. The device can
either mute the audio or switch to the AUX input when the
optional mute wire is activated.
Set Device Name: Assigns a name to a connected stereo.
Stereo: Assigns the remote control to a connected stereo.
Update: Updates the connected stereo or remote control
through a connected stereo.
Factory Reset: Resets the connected stereo to factory defaults.
About: Shows the installed software version.
Zone Settings
You can adjust the settings for each available zone using the
remote control. Each zone has different settings you can adjust.
Select > Zone.
Tone: Sets the bass, mid, and treble for all zones.
Assign: Assigns the remote control to a single zone or to all
zones.
Zone 1 Settings
Select > Zone > Zone 1.
Balance: Sets the left and right balance of the zone.
Volume Limit: Sets the maximum volume for the zone.
Set Zone Name: Assigns a name to the zone.
Zone 2 Settings
Select > Zone > Zone 2.
Enable: Enables and disables the zone.
Link to Zone 1: Enables zone 2 to use the same settings as
zone 1.
Balance: Sets the left and right balance of the zone.
Volume Limit: Sets the maximum volume for the zone.
Set Zone Name: Assigns a name to the zone.
Zone 3 Settings
Select > Zone > Zone 3.
Enable: Enables and disables the zone.
Balance: Sets the left and right balance of the zone.
Volume Limit: Sets the maximum volume for the zone.
Subwoofer: Sets the output level of the subwoofer and adjusts
the frequency filter.
Volume Control: Allows the volume of this zone to be controlled
by another amplifier or stereo and provides a fixed line-level
output when the option button is cleared.
Set Zone Name: Assigns a name to the zone.
More Information
Registering Your Fusion BB300
Help us better support you by completing our online registration
today.
• Go to www.fusionentertainment.com.
• Keep the original sales receipt, or a photocopy, in a safe
place.
Getting the Owner's Manual
You can get the latest owner's manual and translations of
manuals from the web.
1
Go to www.fusionentertainment.com/marine.
2
Select your product.
3
Select Manuals & Downloads.
4
Select a manual.
Supported NMEA 2000 PGN Information
PGN Number Data Field
127250 Heading sensor reference:
• 0: True
• 1: Magnetic
128259 Water speed reference:
• 00: Paddle wheel
• 01: Pitot tube
• 02: Doppler log
• 03: Correlation log (ultrasound)
• 04: Electromagnetic (EM) log
128267 Water depth:
• Offset add or subtract
129025 Position:
• Latitude and longitude
129026 Course Over Ground (COG) and Speed Over Ground
(SOG)
COG reference:
• 0: True
• 1: Magnetic
129029 Global Navigation Satellite System (GNSS) position
data
129284 Navigation data:
• ETA date
130306 Wind data reference:
• 0x02 : Apparent wind (relative to the vessel
centerline)
130310 Water temperature and air pressure
130311 Water temperature and air pressure
130312 Temperature and temperature source:
• - 00 : Sea temperature
130314 Actual pressure and pressure source:
• 00 : Atmospheric pressure
130577 Direction data and COG reference:
• 0: True
• 1: Magnetic
More Information 3