Owner's Manual

Connecting an Auxiliary Device
You can connect various auxiliary devices to the stereo. These
devices have either RCA connectors, a line output, or a
headphone output jack.
1
Locate the auxiliary connectors on the stereo.
2
If necessary, connect an RCA-to-3.5 mm adapter cable to the
auxiliary device.
3
Connect the auxiliary device to the RCA connectors on the
device.
Additional Settings
The available settings vary based on the source selected.
Bluetooth Settings
When a compatible Bluetooth smartphone or media player is
paired and connected to your FUSION MS-BB300 stereo, you
can play media and change options using the remote control.
From the Bluetooth source, select .
Discoverable: Allows the FUSION MS-BB300 stereo to be
discovered by a Bluetooth smartphone or media player when
pairing.
Remove Device: Removes a saved, paired Bluetooth
smartphone or media player from the FUSION MS-BB300
stereo.
iPhone
®
and iPod
®
Settings
When a compatible iPhone or iPod is connected to the USB port
of your stereo, you can play media and change options using
the remote control.
From the iPod source, select > iPod Settings.
Repeat: Sets the repeat method for the track or playlist.
Shuffle: Sets the shuffle method for the tracks or album.
MTP Settings
When a compatible MTP device, such as an Android
smartphone, is connected to the USB port of your stereo, you
can play media and change options using the remote control.
From the MEDIA source, select .
Repeat: Sets the repeat method for the track or playlist.
Shuffle: Sets the shuffle method for the tracks or album.
USB Settings
When a compatible USB flash drive is connected to the USB
port of your stereo, you can play supported audio formats and
change options using the remote control.
From the USB source, select .
Repeat: Sets the repeat method for the track or folder.
Shuffle: Sets the shuffle method for the tracks or folder.
FM and AM Settings
In addition to changing stations, you can manage your preset
stations using the remote control.
From the FM or AM source, select > Presets.
Save Current: Saves the currently playing station as a preset.
Remove Preset: Allows you to remove one or all preset stations
from the device.
TIP: You can quickly save the selected station as a preset by
holding .
General Settings
Select > Settings.
NOTE: When an option button is filled, the option is on. When
the button is clear, the option is off.
NOTE: Not all options and settings are available for all stereos.
See the stereo owner's manual for more details.
Zone: Enables you to configure the speaker zones.
Zone > Tone: Adjusts the bass, middle, and treble tones.
LCD: Sets the brightness and contrast.
Power Save: Enables and disables the backlight power-save
feature.
Key Sound: Enables and disables the sound.
Wake with Stereo: Turns on the remote when the stereo is
turned on by an MFD.
NMEA Monitor: Sets the data to view, the data display cycle,
and the units of measure for NMEA 2000 data from a
connected FUSION-Link compatible multi-function display
(MFD).
Language: Sets the language used on the remote.
Searching: Enables FUSION Alpha Search Technology (FAST),
which allows you to quickly search for tracks by letter or
number. If your iPhone, iPod, or MTP media source contains
more than 100 artists, songs, or albums, you can enable a
fast search to quickly navigate by letter or number. The Off
option turns off FAST searching and displays artist, album,
and song lists using the default layout. The 100-800 options
display lists using the FAST search menu.
Tuner Region: Sets the region used by the FM, AM, DAB, or
SiriusXM source.
Tel Mute: Sets the behavior of the mute wire. The device can
either mute the audio or switch to the AUX input when the
optional mute wire is activated.
ARTWORK: Shows or hides the album cover artwork on a
connected FUSION-Link compatible multi-function display
(MFD).
NOTE: Album art cannot be shown on a remote control or
when the media player is connected using Bluetooth
technology.
Sources: Remove sources you do not want to see in the source
list.
Set Device Name: Assigns a name to a connected stereo.
Stereo: Assigns the remote control to a connected stereo.
Update: Updates the connected stereo, remote control, or
accessory.
Update > Factory Reset: Resets the connected stereo settings
to factory default values.
About: Shows the installed software version of the
entertainment system and the remote.
Zone Settings
You can adjust the settings for each available zone using the
remote control. Each zone has different settings you can adjust.
Select > Settings > Zone.
Tone: Sets the bass, mid, and treble for all zones.
Assign: Assigns the remote control to a single zone or to all
zones.
Internal Amplifier: Selects the internal stereo amplifier or an
external amplifier.
Zone 1 Settings
Select > Settings > Zone > Zone 1.
Balance: Sets the left and right balance of the zone.
Volume Limit: Sets the maximum volume for the zone.
Set Zone Name: Assigns a name to the zone.
Connecting an Auxiliary Device 5