FUSION MS-RA70/MS-RA70N ® MARINE ENTERTAINMENT SYSTEM OWNER’S MANUAL ® ENGLISH FUSIONENTERTAINMENT.
© 2015–2016 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.fusionentertainment.com for current updates and supplemental information concerning the use of this product.
Table of Contents Side Dimensions Top Dimensions Getting Started 1 Stereo Controls Using the Dial to Select Items Selecting a Source Entering Text Adjusting the Backlight Brightness and Contrast Stereo Screen Media Player Connection USB Device Compatibility Connecting a USB Device Connecting an Auxiliary Device Connecting the Stereo to a Garmin® Watch Adjusting the Volume Adjusting the Tones Speaker Zones 1 1 1 1 1 1 1 1 2 2 2 2 2 2 Bluetooth Device Playback 3 Connecting a Compatible Bluetooth Devic
Getting Started Entering Text This manual covers the features of both the FUSION MS-RA70 and the FUSION MS-RA70N. Only the FUSION MS-RA70N is compatible with NMEA 2000 , and all topics that refer to NMEA 2000 functionality apply to the FUSION MS-RA70N only. ® ® Stereo Controls You can enter text to change some settings field values on this device. 1 In a settings field that allows you to enter text, select to erase the existing characters.
The stereo is compatible with Android™ devices that support the Android Open Accessory (AOA) protocol. NOTE: The stereo is not compatible with Android devices in MTP or PTP mode. See the instructions for your Android device to connect using AOA, if necessary. The stereo is compatible with media players and other USB mass storage devices, including USB flash drives. Music on USB drives must meet these conditions: • The USB mass storage device must be formatted using the FAT32 file system.
above the selected frequency are not passed to the subwoofer. The setting applies to both subwoofer outputs. 1 Select > SETTINGS > ZONE > ZONE 1 > SUB FILTER. 2 Select a frequency. 3 Press the dial to save the selection. Bluetooth Device Playback You can pair the stereo to up to eight Bluetooth media devices. You can control the playback using the keys, but you cannot browse the music collection. You should select the song or playlist on the media device.
NOTE: The shuffle feature is controlled by the music application on connected Apple and Android devices, if supported by the application. 1 From the USB source, select . 2 Select SHUFFLE. Setting a Song to Repeat The repeat feature is available on the USB source only. NOTE: The repeat feature is controlled by the music application on connected Apple and Android devices, if supported by the application. 1 From the USB source, select . 2 Select REPEAT.
Saving a DAB Station as a Preset 1 With the DAB source selected, change the stereo to a DAB station. 2 Select > BROWSE > PRESETS > SAVE CURRENT. TIP: You can quickly save the selected DAB station as a preset by holding . Selecting a DAB Preset from a List Before you can select a DAB preset from a list, you must save at least one DAB station as a preset. 1 Select the DAB source. 2 Select > BROWSE > PRESETS > VIEW PRESETS. 3 Select a preset from the list.
• Make sure you have the latest version of the FUSION-Link application on your Apple device. • Reset the Apple device. Go to www.apple.com for more information. • Contact your FUSION dealer or send an email to FUSION from www.fusionentertainment.com. Stereo Dimension Drawings Front Dimensions My Bluetooth audio is interrupted by short breaks • Ensure the media player is not covered or obstructed. Bluetooth technology performs best with line-of-sight operation. • Bring the media player within 10 m (33 ft.
Index A AM 4 Android device 3 ANT devices 2 Apple device 1, 3, 5 auxiliary input 2 B backlight 1 bass 2 Bluetooth 3 Bluetooth devices 3 D DAB 4, 5 device 1 keys 1 registration 5 F FM 4 FUSION-Link 5 G gain 2 K keys 1, 5 L language 5 M media player 1 menu key 1 N NMEA 2000 5 P power key 1 presets 4, 5 DAB 5 product registration 5 R radio AM 4 FM 4 registering the device 5 remote control 5 repeat 3, 4 S smartphone 3 source 1 speaker zones 2 subwoofer 2 T time format 5 setting 5 tone 2, 5 treble 2
FUSION SUPPORT New Zealand Australia Europe USA Pacific 09 369 2900 1300 736 012 +44 (0) 370 850 1244 623 580 9000 +64 9 369 2900 ® FUSIONENTERTAINMENT.
FUSION® MS-RA70/MS-RA70N Quick Start Manual
MS-RA70/MS-RA70N Quick Start Manual !" t ~~I • Select to skip to the next track, when using an applicable source. • AM or FM source: Select to tune to the next station. Hold for faster tuning (manual mode only) • AUX source: Select to increase the gain for the connected source. • DAB source: Select to advance to the next DAB station in the ensemble. When you reach the end of the current ensemble, the stereo automatically changes to the first available station in the next ensemble.
Stereo Screen The information displayed on the stereo screen varies depending on the source selected. This example shows the stereo playing a track on an iPhone:v mobile digital device. RO•JJS NEST ,,, UPER TUNES '~"':::::;':;:' USION MIX,,"',.
Connecting a Compatible Bluetooth Device You can play media from a compatible Bluetooth device using the Bluetooth wireless connection. 1 Select the Bluetooth source. 2 Select 1§1 > DISCOVERABLE to make the stereo visible to your compatible Bluetooth device. 3 Enable Bluetooth on your compatible Bluetooth device. 4 Bring the compatible Bluetooth device within 10 m (33ft.) of the stereo. 3 Select 1§1 > DISCOVERABLE. The stereo remains discoverable for two minutes. 4 Bring the watch within 3 m (10 ft.
Scanning for DAB Stations Before you can scan for DAB stations, you must connect a compatible DAB module and antenna (not included) to the stereo. Because DAB signals are broadcast in select countries only, you must also set the tuner region to a location where DAB signals are broadcast. Adjusting the Volume 1 Use the dial to adjust the volume. 2 If necessary, press the dial to switch between zones. TIP: To control all zones at the same time, press the dial until all zones are highlighted.
FUSION SUPPORT New Zealand Australia Europe USA Pacific 09 369 2900 1300 736 012 +44 (0) 370 850 1244 623 580 9000 +64 9 369 2900 Made for 0iPhone 0 iPad
FUSI!i1 ' FUSION®MS-RA70/MS-RA70N Installation Instructions ..................................................................................................... 2 Instructions d'installation du FUSION®MS-RA70/MS-RA70N .............................................................................................. 5 FUSION®MS-RA70/MS-RA70N lstruzioni di installazione ............................................. ......................................................
FUSION® MS-RA70/MS-RA70N Installation Instructions • • • Failure to follow these warnings and cautions could result in personal injury, damage to the vessel, or poor product performance. ------- ---. -----·------------·· ...................... ______ _____ --- See the Important Safety and Product Information guide in the product box for product warnings and other important information. This device must be installed according to these instructions.
~ '- ,. / ,I f ( . - 4 / '· ~--~, • liR 4 Place the mounting bracket behind the mounting surface. 5 Make the necessary wiring connections (Connection Considerations, page 3). 6 Place the stereo in the opening. 7 Secure the stereo to the mounting bracket using the included screws (3). ' Connects to the negative terminal of a 12 Vdc ' power source capable of supplymg 15 A. This wire should be connected before connecting the yellow wire.
Complete System Wiring Provides a full-range output to an external amplifier, and is associated with the volume control for zone 2. ~- Subwoofer out L 1 _j --- -- - --- - -- - Each cable provides a single mono output to a powered subwoofer or subwoofer amplifier, and one or both cables can be used, : , depending on the connection requirements of I the subwoofer or amplifier. A connected subwoofer is associated with the I volume control for zone 1.
~~ @ tiM~~:~~~Oter~i~ato~~~ackbon:_ cab_l~--~ l 1 Top Dimensions MEA 2000 T-connector /_'I I M:EA2iioo-term-inaioro r backbone cable '.. -~.-~ '1-----~ .. - -- --- - - l 161 mm (6.34 in.) 23.5 mm (0 9lli)---------------------------------------------- -- _ ---·--- -· -··················································· ····---·-···----------- 12 mm (047 in.) , Registering Your FUSION MS-RA70/MS-RA70N Help us better support you by completing our online registration today. • • Go to www.
MS-RA70/RA70N Mounting Template 1~-------------------173 mm (6.81 i n . ) - - - - - - - ? - 1 -------0+ + I I I I I I I I 12.0 mm (1 5/32 in.) I +0 + 51 mm (2 ·n.) I I 162mm(6.38;n.
Important Safety and Product Information ........................................................................................................................................ 2 Informations importantes sur le produit et Ia securite ....................................................................................................................... 3 lnformazioni importanti sui Ia sicurezza e sui prod otto ..................................................................................................
Important Safety and Product Information Failure to heed the following warnings could result in an accident resulting in death or serious injury. Marine Operation Warnings • You are responsible for the safe and prudent operation of your vessel. This device does not relieve you from the responsibility of safely operating your vessel. Avoid navigational hazards and never leave the helm unattended. • Always be prepared to promptly regain control of the vessel.
• Applicable law may not allow the limitation or exclusion of liability in some situations therefore the above limitations or exclusions may not apply to you. • FUSION neither assumes nor authorises any authorised service centre or any person or entity to assume for it any other obligation or liability beyond that which is expressly provided for in this warranty. • All warranty information, product features and specifications are subject to change without notice.
