Owner's Manual

Advisory Description Resolutions
Subscription
Updated
The radio has detected a change in your SiriusXM
subscription status.
• Select any button to clear the message.
• Go to www.siriusxm.com or call 866-635-2349 with questions about
your subscription.
Channel Not
Available
The channel you requested is not a valid SiriusXM
channel, or the channel that you were listening to is
no longer available. You may see this message
briefly the first time you connect a new SiriusXM
Connect Vehicle Tuner.
Go to www.siriusxm.com for more information about the SiriusXM channel
lineup.
Channel Not
Subscribed
The channel you requested is not included in your
SiriusXM subscription package, or the channel you
were listening to is no longer included in your
SiriusXM subscription package.
Go to www.siriusxm.com or call 866-635-2349 for more information about
your subscription package or to subscribe to the channel.
Channel Locked The channel you requested is locked by the parental
control feature.
Refer to the parental control section in the owner's manual to unlock
channels.
Clearing SiriusXM Data
You can clear all entered SiriusXM user information, such as
favorite teams and alerts.
Use the FACTORY RESET option in the settings menu to
reset the stereo (Update Options, page 8).
NOTE: The factory reset setting resets all data in the stereo,
including AM and FM presets, zone settings, etc. in addition
to clearing all SiriusXM user information.
DAB Playback
When you connect a compatible Digital Audio Broadcasting
(DAB) module and antenna, such as the MS-DAB100A to the
RA210 stereo, you can tune in to and play DAB stations.
DAB broadcasts are not available in all regions. When the
stereo is not set to a compatible region, the DAB source is not
available.
Setting the Tuner Region
You must select the region you are in to receive DAB stations
properly.
1
Select > SETTINGS > TUNER REGION.
2
Select the region you are in.
Scanning for DAB Stations
Before you can scan for DAB stations, you must connect a
compatible DAB module and antenna (not included) to the
stereo. Because DAB signals are broadcast in select countries
only, you must also set the tuner region to a location where DAB
signals are broadcast.
1
Select the DAB source.
2
Select to scan for available DAB stations.
When scanning is complete, the first available station in the
first ensemble found begins playing.
NOTE: After the first scan is complete, you can select
again to re-scan for DAB stations. When the re-scan is
complete, the system starts playing the first station in the
ensemble you were listening to when you started the re-scan.
Changing DAB Stations
1
Select the DAB source.
2
If necessary, select to scan for local DAB stations.
3
Select or to change the station.
When you reach the end of the current ensemble, the stereo
automatically changes to the first available station in the next
ensemble.
TIP: You can hold or to change the ensemble.
Selecting a DAB Station from a List
1
Select the DAB source.
2
If necessary, select to scan for local DAB stations.
3
Select > BROWSE > STATIONS.
4
Select a station from the list.
Selecting a DAB Station from a Category
1
Select the DAB source.
2
If necessary, select to scan for local DAB stations.
3
Select > BROWSE > CATEGORIES.
4
Select a category from the list.
5
Select a station from the list.
Presets
You can save your favorite AM stations and FM stations as
presets for easy access.
You can save your favorite SiriusXM channels if you are
connected to an optional SiriusXM tuner and antenna.
You can save your favorite DAB stations if you are connected to
an optional DAB module and antenna.
Saving a Station as a Preset
1
With an applicable source selected, tune the stereo to a
station or a channel.
2
Press and hold the dial to select the PRESETS tab.
3
Select .
TIP: You can quickly save the selected station or channel as a
preset by holding .
Selecting a Preset from a List
1
With an applicable source selected, press and hold the dial to
select the PRESETS tab.
2
Select a preset from the list.
Removing Presets
1
With an applicable source selected, press and hold the dial to
select the PRESETS tab.
2
Select .
3
Select each preset you want to remove.
4
When you are finished removing presets, select .
General Settings
Select > SETTINGS.
NOTE: When the check box is filled, the option is turned on.
When the check box is clear, the option is turned off.
ZONE: Enables you to configure the speaker zones (Speaker
Zone Settings, page 8).
DAB Playback 7