Owner's Manual

BRIGHTNESS: Adjusts the screen and dial backlight brightness
(Adjusting the Backlight and Dial Brightness, page 1).
TUNER REGION: Sets the region used by the FM, AM, DAB,
and SiriusXM sources.
LANGUAGE: Sets the language on the device.
DEVICE NAME: Sets a name for this stereo.
TELEMUTE: Sets the behavior of the mute function when the
device is connected to a hands-free mobile phone. When a
call is received, the device can either mute the audio or
broadcast the call through the Aux input. See your hands-free
kit instructions.
SEARCHING: Enables FUSION Alpha Search Technology
(FAST), which allows you to quickly search for tracks by letter
or number. You can select a number to enable the FAST
menu if your music device contains more than the selected
number of items.
POWER OPTIONS: Adjusts power settings, such as the power-
save mode (Power Options, page 8).
SOURCE: Allows you to enable and name the sources.
UPDATE: Updates the stereo or connected devices (Update
Options, page 8).
ABOUT: Shows the software version information for the stereo.
Speaker Zone Settings
Setting a Zone Name
You can set a name for a speaker zone to make it easier to
identify.
1
Select > SETTINGS > ZONE.
2
Select a zone.
3
Select ZONE NAME.
4
Use the on-screen keyboard to enter a name, and select .
Linking Zones
You can link zones 1 and 2 to keep the volume levels
synchronized. Adjusting the volume of either of the linked zones
affects both zones.
Select > SETTINGS > ZONE > ZONE 2 > LINK TO ZONE
1.
When zones 1 and 2 are linked, appears on zones 1 and 2 on
the volume screen.
NOTE: After zones 1 and 2 are linked, you cannot adjust the
volume of each zone individually.
Disabling a Zone
You can disable an unused zone and remove it from the audio
level pages. When a zone is disabled, you cannot change any of
the settings for that zone. You cannot disable zone 1.
1
Select > SETTINGS > ZONE.
2
Select a zone.
3
Select ZONE ENABLED to clear the check box.
Disabling the Internal Amplifiers
If you do not connect speakers directly to zones 1 and 2, you
can disable the internal amplifiers to reduce power consumption.
1
Select > SETTINGS > ZONE.
2
Select INTERNAL AMP ON to clear the check box.
Power Options
Select > SETTINGS > POWER OPTIONS.
NOTE: When the check box is filled, the option is on. When the
check box is clear, the option is off.
POWER SAVE: Disables the LCD backlight after one minute of
inactivity to save battery power.
STANDBY MODE: Allows the stereo to be turned on from a
NMEA 2000 remote control.
Update Options
Select > SETTINGS > UPDATE.
NOTICE
Do not turn off the stereo or disconnect the power during a
software update. Turning off the power during a software update
may cause the stereo to become unresponsive.
NOTE:
• You should update the stereo software using a USB flash
drive formatted to FAT32.
• Do not remove power from the stereo during the update.
• The stereo may restart a few times during the software
update. This is normal.
• You can program only newer versions of software on the
stereo.
STEREO: Updates the stereo using a valid software update file
on a connected USB flash drive (Software Updates,
page 9).
NRX REMOTE: Updates an optional NRX remote connected to
the NMEA 2000 port or NMEA 2000 network using a valid
software update file on a connected USB flash drive.
DAB MODULE: Updates an optional DAB module connected to
the SIRIUS XM port using a valid software update file on a
connected USB flash drive.
FACTORY RESET: Restores all settings to the factory default
values.
Additional Stereo Control Options
Connecting to a Garmin
®
Watch
For a list of a compatible Garmin watches, go to
www.fusionentertainment.com.
For more information about the watch, see the watch manual at
www.garmin.com/manuals.
1
Following the instructions in the watch manual, install the
FUSION-Link Lite
™
app from the Connect IQ
™
store onto the
watch.
2
On the stereo, select the BT source.
3
Select > DISCOVERABLE.
The stereo remains discoverable for two minutes.
4
Bring the watch within 3 m (10 ft.) of the stereo.
NOTE: Stay 10 m (33 ft.) away from other ANT
®
devices
while pairing.
5
Open the FUSION-Link Lite app on the watch.
The first time you open the app on the watch, the watch
automatically pairs with and connects to the stereo. If you
need to pair to another stereo, in the FUSION-Link Lite app,
select Settings > Pair new.
6
Control the audio playback using the FUSION-Link Lite app
on the watch.
After the devices are paired, they connect automatically when
they are turned on, within range, and the app is open on the
watch.
Connecting to an ARX70 Remote Control
1
On the stereo, select the BT source.
2
Select > DISCOVERABLE.
3
Bring the ARX70 remote control within 10 m (33 ft.) of the
stereo.
8 Additional Stereo Control Options