FUSION Apollo™ MS-WB670 ® OWNER’S MANUAL ® ENGLISH FUSIONENTERTAINMENT.
© 2020 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.fusionentertainment.com for current updates and supplemental information concerning the use of this product.
Table of Contents Getting Started 1 Stereo Buttons and Status LEDs Controls Entering Text Using the Dial to Select Items Stereo Screen Control Screen Naming the Device Setting the Home Zone Selecting a Source 1 1 1 1 2 2 2 2 2 Audio Control 2 Adjusting the Volume Muting all Connected Stereos Adjusting the Subwoofer Level Synchronizing the Source and Zone Volume Levels Adjusting the Gain for an Auxiliary Device Speaker Zones DSP Settings Configuring the DSP Settings 2 2 2 2 3 3 3 3 Media Player Conne
Stereo Dimension Drawings Side Dimensions Top Dimensions 14 14 14 Index 15 ii Table of Contents
Getting Started • • • • WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. • Press to select a source. TIP: You can turn the dial to browse, and press the dial to select the source. Stereo Buttons and Status LEDs • BT or USB: ◦ Press to skip to the beginning of the track or to the previous track. ◦ Hold to rewind the current track. • AM/FM: ◦ Auto or manual tuning: Press to tune to the previous station.
• Press the dial to select the highlighted option. Stereo Screen The information displayed on the screen varies depending on the source selected. This example shows a track playing on a device connected using Bluetooth wireless technology. NOTE: The screen shown is from a connected remote control, such as an Apollo ERX400. If you are using your chartplotter to control the stereo, see your chartplotter's owner's manual for more information. ® 3 Select DEVICE NAME, and enter a unique name for the device.
3 Select ZONE > PHONE VOLUME ZONE SYNC. 4 Select a zone or ALL. When you adjust the volume on the source device, the volume on the selected zone is also adjusted. Adjusting the Gain for an Auxiliary Device You can adjust the gain for a connected auxiliary device to achieve a volume level similar to that of other media sources. You can adjust the gain in 1 dB increments. You can also adjust the gain for digital sources using an optical audio connection. 1 Select an auxiliary source.
NOTE: On some Bluetooth devices, adjusting the volume on the device affects the volume level on the stereo. Bluetooth Range Information The stereo and Bluetooth wireless devices have a range of 10 m (33 ft.). Walls and obstacles between the stereo and the Bluetooth wireless device may decrease this range. Selecting a Different Bluetooth Device When you have more than one Bluetooth device paired to the stereo, you can select a different source when needed.
USB Source Settings With the USB source selected, select . REPEAT: Repeats the track or folder. SHUFFLE: Shuffles the tracks in the folder, album, or playlist. Radio To listen to AM or FM radio, you must have a suitable marine AM/FM antenna properly connected to the stereo and be within range of a broadcasting station. For instructions on connecting an AM/FM antenna, see the stereo installation instructions.
television or DVD player may not be ideal. You can disable Optical as a streaming source in the settings, if needed (General Settings, page 9). SiriusXM Satellite Radio Only SiriusXM brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and subscription are required. For more information, go to www.siriusxm.com.
• To delete all saved alerts for songs, artists, or teams, select DELETE BY TYPES, and select a type. • To delete saved alerts for specific artists, select DELETE ARTISTS, and select the artists. • To delete saved alerts for specific songs, select DELETE SONGS, and select the songs. • To delete saved alerts for specific teams, select DELETE TEAMS, and select the teams. TuneMix™ Feature NOTE: The TuneMix feature is compatible with the SXV300 tuner (sold separately).
Clearing All Locked Channels 1 With the SiriusXM source selected, select 2 Enter the passcode. > PARENTAL > CHANGE PIN. 3 Select 4 Follow the on-screen instructions. > PARENTAL > UNLOCK. 2 Enter the passcode. > PARENTAL > CLEAR ALL LOCKED. 3 Select Changing the Parental Control Passcode > PARENTAL 1 With the SiriusXM source selected, select > UNLOCK.
Selecting a DAB Station from a List 1 Select the DAB source. 2 If necessary, select to scan for local DAB stations. > BROWSE > STATIONS. 3 Select 4 Select a station from the list. Selecting a DAB Station from a Category 1 Select the DAB source. 2 If necessary, select to scan for local DAB stations. > BROWSE > CATEGORIES. 3 Select 4 Select a category from the list. 5 Select a station from the list. 3 Select the stereos you want to add to the group. 4 Select GROUP.
ZONE: Enables you to configure the speaker zones (Speaker Zone Settings, page 10). BRIGHTNESS: Adjusts the screen and dial backlight brightness . TUNER REGION: Sets the region used by the FM, AM, DAB, and SiriusXM sources. LANGUAGE: Sets the language on the device. DEVICE NAME: Sets a name for this stereo. TELEMUTE: Sets the behavior of the mute function when the device is connected to a hands-free mobile phone.
4 Select a zone. 5 Select MORE. 6 Select one or more options: • To limit the maximum volume output of this zone, select VOLUME LIMIT, and adjust the level. • To set the subwoofer level for this zone, select SUB LEVEL, and adjust the level. • To adjust the right and left speaker balance of this zone, select BALANCE, and adjust the balance. Power Options Select , select the name of the stereo, and select SETTINGS > POWER OPTIONS. SYSTEM OFF: Sends a signal to turn off on all devices connected to the network.
FACTORY RESET: Restores all settings to the factory default values. REFRESH NETWORK: Clears discovered stereos from the device and searches for new stereos on the network. Additional Stereo Control Options NOTE: You cannot update the stereo software using a Bluetooth connection. You must connect the app using a Wi‑Fi connection to update the stereo software wirelessly. You can connect an Apple device to the stereo using a USB cable to update the stereo software.
Link remote control app on your compatible Apple or Android device. To download the app and update the device software, go to the Apple App Store or the Google Play store. Updating the Software Using a USB Flash Drive You can update the device software using a USB flash drive. NOTICE Do not turn off the device or disconnect the power during a software update. Turning off the power during a software update may cause the device to become unresponsive.
Specifications Top Dimensions Weight 475 g (16.75 oz.) Water rating IEC 60529 IPX21 Operating temperature range From 0 to 50°C (from 32 to 122°F) Storage temperature range From -20 to 70°C (from -4 to 158°F) Input voltage From 10.8 to 16 Vdc Current (max.) 15 A Current (muted) Less than 700 mA Current (off) Less than 100 mA Fuse 15 A mini blade-type NMEA 2000 LEN @ 9 Vdc 1 (50 mA) Bluetooth wireless range Up to 10 m (30 ft.) ANT wireless range Up to 3 m (10 ft.
Index A AirPlay 5 alerts 6 AM 5, 9 amplifier 10 Android 4 Android device 4 Android devices 4, 12 ANT devices 12 Apple device 4, 13 Apple devices 12 auxiliary input 3, 5 B bass 10 Bluetooth devices 3, 4, 12 buttons 1 D DAB 5, 8, 9 device cleaning 12 registration 12 digital audio 5 DSP 3 source 2, 5, 9 speaker zones 2, 3, 10 home 2 subwoofer 2, 10 T tone 10 treble 10 troubleshooting 13 U USB 4, 5 flash drive 4 USB devices 3, 4 V volume 2, 10 adjusting 2 W watch 12 Wi‑Fi technology 11 Z zones 2 F fact
FUSION SUPPORT New Zealand Australia Europe USA Pacific 09 369 2900 1300 736 012 +44 (0) 370 850 1244 623 580 9000 +64 9 369 2900 ® FUSIONENTERTAINMENT.
FUSION® Apollo™ MS-WB670 Quick Start Manual .; ,· .
Apollo MS-WB670 Quick Start Manual TM Getting Started .&.WARNING - - - - - - - - - - See the Important Safety and Product Information guide in the product box for product warnings and other important information. The MS-WB670 hideaway stereo is a stereo that you control using a Fusion• remote control, Garmin®chartplotter, or other Fusion stereo on the same network.
Naming the Device You should enter a unique name for this device so you can easily identify it when viewing devices on the Fusion PartyBus'" network. 1 Select 5 > SETTINGS. 2 Select the device to rename. 3 Select DEVICE NAME, and enter a unique name for the device. Creating or Editing a Group Before you can create a group, you must connect multiple compatible stereos to the Fusion PartyBus network. See the installation instructions provided with your stereo for installing and configuring the network.
NOTE: If the is device part of a group on the Fusion PartyBus network, continue turning the dial to access the sources on other devices in group (page 3). 3 Press the dial to select the source. Adjusting the Volume 1 Turn the dial to adjust the volume. 2 If necessary, press the dial to view all zones, and select a different zone. TIP: You can select ALL to control all zones on the stereo or all zones in the group at the same time (page 3).
You can control the music playback with the media app on a Bluetooth device or using the Fusion-Link"' remote control app (page 5). 1 Select the BT source. 2 Select 55 > DISCOVERABLE to make the stereo visible to your compatible Bluetooth device. TIP: You can also press the* button on the stereo to make it discoverable. 3 Enable Bluetooth on your compatible Bluetooth device. 4 Bring the compatible Bluetooth device within 10 m (33 ft.) of the stereo.
The app communicates with the stereo using a wireless connection to the mobile device. You must connect your compatible device to the stereo using Bluetooth technology to use the app. If the stereo is connected to a network with a Wi-Fi access point, the app can communicate with the stereo using the network for greater range than a Bluetooth connection. NOTE: You cannot update the stereo software using a Bluetooth connection.
2 Select the appropriate source. 3 If necessary, select 5 to browse the music on the USB device. 4 If necessary, launch a music application on the USB device, and begin playback. You can use the remote control, chartplotter, or stereo controls to select, play, pause, and skip tracks. Controlling Music Playback on a Connected Smartphone or Media Player 1 Connect a compatible smartphone or media player to the stereo using USB or Bluetooth (if available). 2 Select the appropriate source.
FUSION SUPPORT fusionentertainment.
® Apollo™ MS-WB670 Installation Instructions Important Safety Information WARNING Failure to follow these warnings and cautions could result in personal injury, damage to the vessel, or poor product performance. See the Important Safety and Product Information guide in the product box for product warnings and other important information. This device must be installed according to these instructions. Disconnect the vessel's power supply before beginning to install this product.
Item Description FUSE Contains the 15 A fuse for the device. USB Connects the stereo to a USB source. SXM TUNER Connects the stereo to a SiriusXM Connect Tuner to receive SiriusXM stations where available (not included). Connects to a FUSION DAB module to receive DAB stations where available (not included). DIGITAL AUDIO IN (OPTICAL) Connects the stereo to an optical digital audio source, such as TV or DVD player.
1 Route the yellow power , red ignition , and black ground wires to the battery, and route the wiring-harness plug to the stereo. Do not connect the wiring harness to the stereo until all of the bare wire connections have been made. 2 Connect the black wire to the negative (-) battery terminal. 3 If you are routing the red wire through the ignition or another manual switch , connect the red ignition wire to the ignition or switch.
NMEA 2000 power cable NMEA 2000 drop cable from the stereo, up to 6 m (20 ft.) NMEA 2000 drop cable from the chartplotter MFD or compatible FUSION NMEA 2000 remote control 9 to 16 Vdc power supply NMEA 2000 terminator or backbone cable Wired Network Example with a Switch or Router You must use wired network switches, a wired network router, or both to connect more than two FUSION PartyBus devices.
Network Configuration Operating temperature range From 0 to 50°C (from 32 to 122°F) Setting the Stereo as the DHCP Server If you connected more than two network devices together directly or using a network switch or wireless access point and did not install a router, you should configure only one FUSION PartyBus stereo to be a DHCP server. > SETTINGS > NETWORK > STATIC IP > SAVE. 1 Select 2 Select ADVANCED > DHCP SERVER > DHCP ENABLED > SAVE.
130 mm (5.10 in.) 130 mm (5.10 in.) Software Updates For best results, you should update the software in all FUSION devices at the time of installation to ensure compatibility. You can update the software using a USB flash drive not formatted to the NTFS file system. For software updates and instructions on updating the device using the USB flash drive, go to the device product page at www.fusionentertainment.com /marine.
Important Safety and Product Information Informations importantes sur le produit et la securite 2 7 Vigtige produkt- og sikkerhedinformationer 8 3 Tarkeita turvallisuus- ja tuotetietoja guida lnformazioni importanti sulla sicurezza e sul prodotto 4 Wichtige Sicherheits- und Produktinformationen 5 lnformaci6n importante sobre el producto y tu seguridad 6 lnforma~oes importantes sobre seguran~a e sobre o produto 6 © 2014-2019 Garmin Ltd.
Failure to heed the following warnings could result in an accident or collision resulting in death or serious injury. Marine Operation Warnings You are responsible for the safe and prudent operation of your vessel. This device does not relieve you from the responsibility of safely operating your vessel. Avoid navigational hazards and never leave the helm unattended. • Always be prepared to promptly regain control of the vessel. Use caution near hazards in the water, such as docks, pilings and other vessels.
Limited 3-Year Marine Consumer Warranty for Australian Consumers Garmin Australasia, 30 Clay Place, Eastern Creek, NSW 2766, Australia. EMAIL: australia@fusionentertainment.com PHONE: 1800 235 822 THE FUSION PROMISE OF QUALITY LIMITED 3-YEAR CONSUMER WARRANTY This warranty is given in addition to other rights and remedies available to the consumer under Australian Consumer Law. In addition to the FUSION Warranty, our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
FUSION-LINK™ LITE THE MARINE ENTERTAINMENT STANDARD Fusion-Link is the industry standard protocol for on water audio integration and control. It enables partnered marine Multi-Function Displays, compatible devices and Garmin Smartwatches to control the entertainment right from your fingertips. Control the entertainment right from your wrist with the Fusion-Link Lite app.
FUSION-LINK™ CONTROL Download the free Fusion-Link remote control app for Bluetooth and Wi-Fi from the Apple® App Store or Google PlayTM and enjoy the freedom of wireless control from your compatible device.
NEW USER INTERFACE
Adding a new DSP profile is easier than ever before. Just follow the 3 step process to configure your entertainment system for a technically superior listening experience. EASY-TO-INSTALL DSP PROFILES RIGHT FROM YOUR DEVICE . ··- Setting up your Digital Signal Processing (DSP) profiles is made simple with the free Fusion-Link App.
