Owner's Manual

You can control the music playback with the media app on a Bluetooth device or
using the Fusion-Link "' remote control app (page 5).
1 Select the BT source.
2 Select 55 > DISCOVERABLE to make the stereo visible to your compatible
Bluetooth device .
TIP: You can also press the* button on the stereo to make it discoverab le.
3 Enable Bluetooth on your compatible Bluetooth device .
4 Bring the compat i ble Bluetooth device within 10 m (33 ft .) of the stereo .
5 On your compatible Bluetooth device , search for Bluetooth devices.
6 On your compatible Bluetooth device , select the stereo from the list of
detected devices .
7 On your compatible Bluetooth device , follow the on-screen instructions to pair
and connect to the discovered stereo.
When pairing , your compatible Bluetooth device may ask you to confirm a
code on the stereo. The stereo does not display a code , but it does connect
correctly when you confirm the message on the Bluetooth device.
8 If your compatible Bluetooth device does not immediately connect to the
stereo , repeat steps 1 through 7.
The DISCOVERABLE setting is disabled automatically after two minutes .
NOTE: On some Bluetooth devices , adjusting the volume on the device affects
the volume level on the stereo.
Connecting to a Garmin Watch
For more information about the watch , see the watch manual at www.garmin . com
/ manuals.
1 Following the instructions in the watch manual , install the Fusion-Link Lite "'
app from the Connect IQ "' store onto the watch.
2 On the stereo , select the BT source .
3 Select 55 > DISCOVERABLE .
The stereo remains discoverable for two minutes .
Quick Sta rt M anual
4 Bring the watch within 3 m ( 10 ft .) of the stereo .
NOTE: Stay 10 m (33 ft .) away from other AN 'f devices wh il e pair i ng .
5 Open the Fusion-Link Lite app on the watch .
The first time you open the app on the watch , the watch automatically pairs
with and connects to the stereo. If you need to pair to another stereo , in the
Fusion-Link Lite app , select Settings > Pair new .
6 Control the audio playback using the Fus i on - Link Lite app on the watch .
After the devices are paired , they connect automatically when they are turned on ,
wi thin range , and the app is open on the watch.
Connecting to an ARX70 Remote Control
1 On the stereo , select the BT source .
2 Select 55 > DISCOVERABLE .
TIP: You can also press the* button on the stereo to make it discoverab le.
3 Bring the ARX70 remote control within 10 m (33 ft. ) of the stereo .
NOTE: Stay 10 m (33 ft. ) away from other ANT devices while pairing .
4 On the ARX70 remote control , press and hold ,® until the status LED starts
alternating green and red.
The remote control searches for the stereo. When the remote control pairs
successfully , the status LED turns on green briefly and then turns off .
If the remote control cannot find the stereo , the status LED turns on red briefly
and then turns off .
Fusion-Link Wireless Remote Control App
You can use the Fusion-Link remote control app on your compatible Apple or
Android device to adjust the stereo volume , change the source , control playback ,
select and manage radio presets , and adjust some stereo settings . You can use
the app to set up and configure DSP profiles on the stereo . You can use the app
to update the stereo software .
5