Owner's Manual

9
If the mounting holes do not line up, mark the new hole
locations.
10
Using an appropriately sized drill bit for the mounting surface
and screw type, drill the holes.
11
Remove the template from the mounting surface.
12
Connect the subwoofer wires while observing polarity
(Speaker Wiring, page 2).
13
If necessary, connect the LED wires (LED Wiring, page 2).
14
Place the subwoofer in the cutout.
15
Secure the subwoofer to the mounting surface using the
included screws.
NOTE: Do not over tighten the screws, especially if the
mounting surface is not flat.
Speaker Wiring
When connecting the subwoofer to your amplifier, observe these
considerations.
• The wires on the speaker are terminated with connectors,
and you should use the provided harness when connecting
the speaker wires to the amplifier.
• Speaker wire is not included with subwoofer. You should use
12 AWG (3.31 mm²) or larger speaker wire to connect the
wiring harness to the amplifier.
You can use these tables to identify the polarity of the wires on
the provided harness.
Lead color Polarity
White Positive (+)
White with a black stripe Negative (-)
LED Wiring
It is recommended to install a Fusion CRGBW Wireless Remote
Control with these speakers to turn the LEDs on and off, change
the colors, and create lighting effects. See your Fusion dealer or
www.fusionentertainment.com for more information.
You should follow the instructions provided with the remote
control to connect the LED wires from the speakers to the
remote control receiver module and to connect the receiver
module to power.
If you choose not to install the remote control, you can set the
static color of the LEDs by connecting the colored LED wires
directly to the power source (Connecting the LED Wires,
page 2).
Connecting the LED Wires
If you do not install the recommended remote control, you can
set the static color of the LEDs by connecting the colored LED
wires from the harness to the negative (-) terminal of a 12 Vdc
power source. You can splice the negative (-) wire to multiple
LED wires to customize the LED color and tone. You must
connect the black LED wire from the harness to the positive (+)
terminal of the same power source to complete the circuit.
The LED wires on the speaker are terminated with connectors,
and you should use the provided harness when connecting the
LED wires to the speaker.
You should use 22 AWG (0.33 mm²) or thicker wire to connect
the LED wires from the harness to the battery.
You must connect the positive (+) wire for all of the speaker
LEDs through a 3 A fuse near the power-source. You should
also connect the positive (+) power wire to the power source
through an isolator switch or circuit breaker to turn the LEDs on
and off. You can use the same isolator or circuit breaker
controlling the power supply to your stereo, which allows you to
turn the LEDs and the stereo on and off at the same time.
1
Connect the black wire on the LED harness to the positive (+)
terminal of the power source .
NOTICE
To avoid damage to the speakers or the vessel, you must
connect this wire through a 3 A fuse near the power source.
2
Connect the negative (-) wire from the same power source to
one or more colored wires on the LED harness according to
the preferred LED color.
NOTICE
You must insulate any unused LED wires on the harness to
avoid causing a short circuit.
LED Color LED Harness Wire Color
Red Red
Green Green
Blue Blue
Yellow Red and green
Magenta Red and blue
Cyan Blue and green
Cool white Turquoise
Warm white Yellow
NOTE: You can connect the cool white or warm white wire to
change the tone of any LED color combination.
3
Connect the harness to the speaker.
Speaker Information
True-Marine
™
Products
True-Marine products are subjected to rigorous environmental
testing under harsh marine conditions to surpass industry
guidelines for marine products.
Any product that bears the True-Marine stamp of assurance has
been designed for simplicity of use and combines advanced
marine technologies to deliver an industry leading entertainment
experience. All True-Marine products are supported by the
Fusion 3-year worldwide limited consumer warranty.
Registering Your Subwoofer
Help us better support you by completing our online registration
today.
• Go to www.fusionentertainment.com/marine/register.
• Keep the original sales receipt, or a photocopy, in a safe
place.
2 Signature Series CRGBW Subwoofer Installation Instructions