Instruction Manual

LED Wiring
NOTICE
Using certain LED colors on the speakers, such as red and green, may violate the laws, regulations, and
standards related to the use and/or operation of marine navigation lights. It is the user's responsibility to
comply with any such applicable laws, regulations, and standards. Garmin is not responsible for any fines,
penalties, citations, or damages that may be incurred due to any such lack of compliance.
It is recommended to install a Fusion CRGBW Wireless Remote Control module with these speakers to turn the
LEDs on and off, change the colors, and create lighting effects. See your Fusion dealer or garmin.com for more
information.
You should follow the instructions provided with the CRGBW Wireless Remote Control to connect the LED wires
from the speakers to the remote control receiver module and to connect the receiver to power.
If you choose not to install the remote control, you can set the static color of the LEDs by connecting
combinations of the LED wires directly to the power source (Connecting the LED Wires Directly, page4).
3