Quick Start Manual

When scanning is complete, the first available station in the first ensemble
found begins playing.
NOTE: After the first scan is complete, you can select again to re-scan for
DAB stations. When the re-scan is complete, the system starts playing the
first station in the ensemble you were listening to when you started the re-
scan.
Changing DAB Stations
1
Select the DAB source.
2
If necessary, select to scan for local DAB stations.
3
Select or to change the station.
When you reach the end of the current ensemble, the stereo automatically
changes to the first available station in the next ensemble.
FUSION PartyBus
™
Networking
The FUSION PartyBus networking feature allows you to connect multiple
compatible stereos together on a network, using a combination of wired or
wireless connections.
The Apollo
™
RA670 stereo does not have built-in
Wi‑Fi
®
technology. To use the
wireless functions of the FUSION PartyBus network, you must connect the stereo
to the FUSION PartyBus network using a wired ethernet connection, and then
connect a Wi‑Fi access point or router to the FUSION PartyBus network.
A FUSION PartyBus stereo, such as the Apollo RA670 stereo, can stream
sources to other FUSION PartyBus stereos connected to the network. Connected
FUSION PartyBus stereos can also control media playback on the FUSION
PartyBus stereo.
A FUSION PartyBus zone stereo, such as an Apollo SRX400 zone stereo can
stream from a FUSION PartyBus stereo, but cannot stream sources to other
FUSION PartyBus stereos on the network.
FUSION PartyBus stereos cannot control the speaker volume of another stereo.
You can adjust the volume of speakers or speaker zones connected directly to
the stereo only.
In the image above, one Apollo RA670 stereo connects to a wireless router
and to two Apollo SRX400 zone stereos .
A FUSION PartyBus zone stereo, such as the
Apollo SRX400, controls the
volume in a single speaker zone
. A FUSION PartyBus stereo, such as an
Apollo RA670 stereo, controls the volume on multiple speaker zones to cover
a larger area with that stereo.
Streaming from a FUSION PartyBus
Stereo on the Network
Before you can stream from a stereo on the FUSION PartyBus network, you
must set up and configure your FUSION PartyBus stereos according to the
installation instructions.
1
Select
.
2
Press and hold the dial to open the PARTYBUS tab.
TIP: You can press and hold to show available FUSION PartyBus
devices.
The device shows a list of available
FUSION PartyBus stereos on the
network.
3
Select the stereo you want to stream from.
6 Quick Start Manual
Confidential