Instruction Manual

Wire Strain Relief
NOTICE
Failure to secure the wiring-harness connections can damage the speaker.
The wires connected to the speaker and the included wiring harness use Amphenol
™
AT Series
™
connectors, and
these connectors must be secured during installation to provide strain relief for the internal wire connections to
the speaker. You can secure these connections using various methods.
• You can use cable ties or other third-party fastening devices to secure the connection to an appropriate
location.
• You can use the various Amphenol A Series
™
clips produced by Amphenol to secure the connection. You can
check with your local electronics or marine dealer, or go to the Amphenol-Sine website for more information.
Speaker Information
True-Marine
™
Products
True-Marine products are subjected to rigorous environmental testing under harsh marine conditions to surpass
industry guidelines for marine products.
Any product that bears the True-Marine stamp of assurance has been designed for simplicity of use and
combines advanced marine technologies to deliver an industry leading entertainment experience. All True-
Marine products are supported by the Fusion 3-year worldwide limited consumer warranty.
Cleaning the Speakers
NOTE: When mounted correctly, these speakers are rated IP65 for dust and water ingress protection under
normal conditions. They are not designed to withstand high pressure water spray, which may occur when
you wash down your vessel. Failure to carefully spray-clean the vessel may damage the product and void the
warranty.
NOTICE
Do not use harsh or solvent-based cleaners on the speakers. Using such cleaners may damage the product and
void the warranty.
1 Clean all salt water and salt residue from the speaker with a damp cloth soaked in fresh water.
2 Use a mild detergent to remove a heavy buildup of salt or stains.
6