Owner's Manual

MOUNTING THE MS-BT200
FUSION recommends that the MS-BT200 is mounted in an elevated
position
as far away from metal work as possible. This will ensure
maximum range
for Bluetooth audio streaming.
The MS-BT200 can be secured by either using the adhesive pad or by
-using a 6 gauge, pan head, self tapping, non-corrosive screw.
Please ensure that the mounting surface is flat, clean and dry
prior to
applying the adhesive backing tape. The surface
can be cleaned with an
alcohol swab.
When mounting using the screw hole, ensure that the surface is flat and
tightening the screw does not distort the case.
ALTERNATIVE MOUNTING:
REMOVE LINER ON ADHESIVE PAD
AND STICK UNIT TO BULKHEAD
DRILL PILOT HOLE
4