700 SERIES Manual MARINE ENTERTAINMENT SYSTEM MS-IP700 True Marine Entertainment System for iPod MS-AV700 True Marine DVD Entertainment System Specifications and design are subject to change without notice 71 71 7171
WARNINGS AND CAUTIONS Do not attempt to open the unit’s chassis. There are no user-serviceable parts or adjustments inside. USING iPod This unit has been tested with compatible authentic iPod models under normal expected operating conditions, free from any pre-existing defects in either the unit or the iPod.
NOTES ................................................................................................................................................................................................................ ................................................................................................................................................................................................................ ........................................................................................
CONTENTS USER INTERFACE AND CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Control Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ROTARY ENCODER AND MENU KEY . Encoder Operation . . . . . . . . . . . . . . . . . Menu Key Operation . . . . . . . . . .
NOTES ................................................................................................................................................................................................................ ................................................................................................................................................................................................................ ADDITIONAL FEATURES . . . . . . . . . . FUSION-Link. . . . . . . . . . . . . . . . . .
selecting audio tracks ............................................................................................................................................... 25 settings, changing ........................................................................................................................................................ 27 VHF background noise, minimizing ...............................................................................................................................
sub filter, setting ........................................................................................................................................................... 54 tel mute setting ............................................................................................................................................................. 56 tuner region, setting ......................................................................................................................................
USING THE ROTARY ENCODER AND MENU KEY You can use the Rotary Encoder and Menu key to adjust levels, access menus and open control screens. Adjusting levels Use the Encoder and Menu key to adjust levels on the 700 Series. For example, to adjust the volume level: Turn Encoder to open the Volume screen Turn Encoder to adjust the level. Press Encoder to move highlight. Menu exit. See “Menu Key Operation” on page 6. Accessing Menus Use the Menu key and Encoder to access menus to change settings.
INDEX 700 Series control panel, layout. ......................................................................................................................................................... 5 ethernet support ............................................................................................................................................................ 30 installing.................................................................................................................................
Both models are also SiriusXM ready (requires optional Sirius receiver. USA only). For further details of setting up Sirius options see “Sirius XM Radio” on page 49. When you select one of these sources, the 700 Series displays a source screen, similar to the AM source screen shown in Figure 1 below. The title bar always shows the current time and source name. Other information varies depending on the source type you have selected.
Tuning range To adjust the volume level: Europe and Australasia FM radio frequency range 87.5–108 MHz. Frequency step 100 kHz 1. Turn the Encoder. • The Volume screen is displayed with the Current Zone Selection Highlighted (remembered from previous use). • The volume is adjusted in the highlighted Zone (or Zones) only. AM radio frequency range 522–1620 MHz. Frequency step 9 kHz USA FM radio frequency range 87.5–107.9 MHz. Frequency step 200 kHz AM radio frequency range 530–1710 MHz.
ADJUSTING SUB-WOOFER LEVEL AND TONE SUPPORT, SALES AND SERVICE Use the Sub level and Tone screens to set the sub-woofer levels and tone. Sub-woofer level can be adjusted for each Zone individually, but tone adjustments affect all Zones. FUSION Electronics in New Zealand + 64 9 369 2900 FUSION Electronics Australia + 61 1300 736 012 FUSION Electronics Europe +31 76 572 3632 FUSION Electronics USA +1 623 580 9000 Website: www.fusionelectronics.
Problem Solution iPod Why does my FUSION Head unit keep locking up when connected to my iPod/iPhone? If you are experiencing software lock-ups or your unit freezes: • Reset the Head unit by pressing the reset button inside the face plate. • Reset your iPod/iPhone (see Apple website from modelspecific information). This should resume normal operation. • Make sure you have the latest version of iTunes and the latest operating software in your iPod/iPhone.
SETTING AND CLEARING THE ALARM APPENDICES Use alarm mode to turn on the 700 Series at a pre-defined time. When the alarm is activated, your 700 Series will play the last selected input source at the volume level in use when the unit was turned off. TROUBLESHOOTING Problem Solution General The unit does not respond to key presses. Menu key • Reset the unit by pressing the Reset button inside the control panel door. Encoder To set the alarm: 1. Press the Menu key. 2.
Sources Use this option to turn the AM or VHF tuner source on or off, if required. This is useful if you only listen to FM and do not wish to step through AM and VHF when selecting a tuner source. To enable or disable the AM of VHF tuner sources: 1. Press the Menu key. 2. Turn and then press the Encoder to select the Settings > Sources. 3. If required, press the Encoder to enable the AM source ( ) or disable the AM source ( ). 4.
TUNER Tel mute Use this option to control which action is taken when the 700 Series is connected to a cellphone hands-free kit. LISTENING TO THE TUNER To select one of the available tuner bands: • Press the Tuner key to select input from each of the following in turn: AM, FM, VHF or SiriusXM (requires optional Sirius tuner module SVX-100, USA only). The applicable input source screen is displayed for each band.
To change the sub filter setting: 1. Press the Menu key. 2. Turn and then press the Rotary Encoder to select Settings > Sub filter. 3. Turn the Rotary Encoder to select the required filter frequency. 4. Press the Rotary Encoder to save the setting and exit. 5. Press any key to exit Key sound The 700 Series makes a short beeping sound when any key is pressed. This feature can be turned on or off, as required. To enable or disable the key sound: 1. Press the Menu key. 2.
Tuning Method Applies to… When tuning with this method… Manual All bands • Press the Forward or Backward key to step through the range of frequencies or channels one at a time. • Press and hold down the key for rapid scanning of frequencies or channels. Manual SiriusXM • Press the Forward or Backward key to step through all channels one at a time. Category SiriusXM • Press the Play / Pause, Forward or Backward key to step through the channels in the selected category.
ADDING AND REMOVING PRESETS The 700 Series allows you to set up your favorite AM/FM stations, VHF or SiriusXM channels as presets for easy recall. Note: Up to 15 presets can be stored for each radio band. 3. Enter the old (current) access code by turning the Encoder to change the highlighted digit, then press the Encoder to select the next digit. When you have entered all four digits correctly, you will be prompted to enter the new access code. 4.
SETTING UP VHF Note: A marine FM antenna is required for VHF reception, DO NOT connect to a VHF splitter. Minimizing background noise Use the Squelch feature to reduce background noise on VHF input. Select a VHF channel, and then adjust the squelch control while there is nothing being transmitted on the channel. To set the squelch level: 1. Press the Menu key. 2. Turn and then press the Encoder to select Squelch. 3.
Special icons When you select a channel in the channels list you may see two different icons at the right hand side of the list. iPod PLAYING CONTENT Before you can use your iPod as an input source you must first connect the device to the 700 Series. For further details, see “Preparing for iPod or USB Input” on page 43. To listen to input from your iPod: • The padlock icon means the channel is locked or considered mature content.
CONTROLLING iPod PLAYBACK Sirius XM menu options Selecting tracks from a playlist Press the Menu key to display the Sirius XM menu that provides access to various control options. Read on to learn more about using the Channels, Category and Parental options. There can be thousands of tracks stored on an iPod, so you need to select the tracks you wish to play from one of the groupings available (such as Playlists, Artists, Albums).
5. If required, press the Encoder to move to the AM/PM field (displayed in 12 hour clock mode only. See Step 7 below). Turn the Encoder to change the AM/PM setting. 6. Press the Encoder to save the time and exit (the time out feature does not operate here). 7. If you want to use the 24 hour clock display (13:09 rather than 1:09 pm, for example), make sure the 24 hour checkbox is selected ( ). See Steps 2–3 below. 8. Press the Menu key (or leave to time out) to save the current setting and exit.
Recommended settings are listed below: CHANGING iPod SETTINGS Additional iPod control features are available through the iPod settings menu. AUX Device AUX gain setting (dB) Portable media player with headphone output Press Menu key The iPod control menu is displayed Turn Encoder to scroll the highlight down to iPod settings. Press Encoder to select iPod settings. Change settings as described below. Menu exit. See “Menu Key Operation” on page 6.
Supported iPod sleeves Full details of included iPod sleeves are printed on a separate card included in the box with the 700 Series. PREPARING FOR AUXILIARY INPUT Subtitles • Off. Subtitles are not displayed when the iPod is playing video • Subtitles. Subtitles are displayed • Closed caption.
USB SOURCE SCREEN An example of a typical USB flash drive input source screen is shown in Figure 5 below. To connect your iPod or USB flash drive to the 700 Series via a MS-DKIPUSB dock: 1. Press the door catch and open the door of the dock.
2. Insert your USB flash drive onto the USB socket or insert your iPod in its sleeve (see iPod compatibility sheet supplied separately) ). Make sure that the device is firmly pushed onto the connector socket. Controlling playback You can control playback with the Play / Pause, Forward and Rewind keys. The selected track starts playing automatically. If you want to: USB socket iPod sleeve Use: Play / Pause a track Notes: • Press the key to pause the current track.
CHANGING USB FLASH DRIVE SETTINGS MS-IP700 model Note: If you select iPod or USB input without first inserting the device, the message “Not connected” is displayed on the screen. Before inserting iPod Press Menu key Press Rotary Turn Rotary Menu exit. See Encoder to change “Menu Key Encoder to highlight Repeat the settings as Operation” on described below. or Shuffle. page 6. To change a highlighted setting in the USB settings menu: 1. Press the Encoder to toggle the value on or off.
To enter the name for the selected Zone: a. Select the Name menu item. The current Zone name is displayed with the first character highlighted. AUXILIARY INPUT LISTENING TO AUXILIARY INPUT The 700 Series can accept audio input from a TV, games console, portable player, computer, DVD player or any compatible device. To listen to input from an alternate auxiliary device: • • b. If required, press the Forward (or Backward) key to highlight the character you wish to change. c.
ADDITIONAL FEATURES FUSION-Link FUSION-Link has the ability to fully control on-board FUSION Entertainment systems (Supported models), by utilizing FUSION-Link capable multi-function displays installed at the helm, flybridge or nav station of the vessel, providing integrated entertainment control and a less cluttered console. You can control one or more FUSION-Link capable stereo units from a single location on the boat with the touch of a button.
Important: If a Zone is disabled, you cannot change any of the following settings for that Zone. Volume control Zones 3 and 4 can have volume control disabled. You should disable volume control for a Zone that has its volume controlled from another amplifier or Head unit. If volume control is: • Enabled: turning the Encoder will change line level output for the selected Zone only. • Disabled: turning the Encoder will not change line level output for the selected Zone.
INFRARED (IR) REMOTE SETTING UP THE 700 SERIES MS-AV700 model only You can use the IR remote to navigate through most functions in all sources ZONES Zone 1 and 2 are powered by the on board Class-D amplifier. External amplifiers are required to utilize the 4 line outputs and 4 subwoofer outputs. You can pre-set the balance, volume limit, sub-woofer level and name for each of the four Zones available on the 700 Series.
700 SERIES CONNECTION EXAMPLE The following keys work for DVD / iPod / USB sources only. Random / Shuffle ZONE 2 ZONE 4 LINE NE OUT LINE OUT MS-FR602 Cycle through repeat options ZONE 1 ZONE 3 MS-FR602 LINE OUT LINE OUT MS-FR602 020 MS-BX3020 MS-FR602 MS-FM504 DVD source selected. MS-FR602 When the DVD source is selected, use the following keys to control specific MS-SW10 features. MS-SW10 602 MS-FR602 MS-AB1060R AUX AUDIO Open a menu in the TV display.
INSTALLATION INSTALLING THE 700 SERIES Dimensions are in millimeters (mm) and inches (”). Not to scale. IF ANY MODIFICATION TO THE VESSEL IS REQUIRED, SUCH AS DRILLING HOLES ETC, FUSION RECOMMENDS CONSULTATION WITH YOUR BOAT DEALER OR MANUFACTURER BEFOREHAND. >> Fit mounting gasket >> Insert the unit into the mounting hole >> Pull down the front face to expose the mounting screw locations >> Use either the supplied 4 x wood screws, or 4 x machined screws and metal clamps to affix the unit into position.
Figure 8 – Dimensions - side view REMOTE CONTROL (NMEA2000) USB CONNECTION (MS-AV700 ONLY) (USB storage device or FUSION dock) SiriusXM ETHERNET CONNECTION Figure 9 – Dimensions - front view ANTENNA L (white) ZONE 1 R (RED) SUB (ORANGE) WHITE L (white) ZONE 2 LEFT R (RED) WHITE/BLACK ZONE 1 SUB (ORANGE) GREY L (white) ZONE 3 RIGHT R (RED) GREY/BLACK SUB (ORANGE) GREEN L (white) ZONE 4 LEFT R (RED) GREEN/BLACK SUB (ORANGE) ZONE 2 PURPLE WHITE RIGHT PURPLE/BLACK LEFT AUX IN
CONNECTIONS ETHERNET CONNECTION DESCRIPTION COLOUR Battery +12VDC Accessory +12V switched Negative Ground Remote Amplifier Enable ouput Dim input [12VDC active] Telemute input [GND active] Yellow Red Black Blue/White Orange Brown For connection to a DHCP Ethernet Router for communication with FUSION-Link capable devices.
