USER MANUAL D-CLASS AMPLIFIER CA-DA12250 CA-DA41400 CA-DA51600 Specifications and design are subject to change without notice
AMPLIFIER SPECIFICATIONS CA-DA12250 Peak Power (Watts) Frequency Response Dimensions (mm) Power Ratings CA-DA41400 CA-DA51600 2250 1400 1600 10Hz - 250Hz 10Hz -65kHz 10Hz -50kHz 300(l) x 210(w) x 50(h) 11-13/16 x 8-1/4 x 2” 300(l) x 210(w) x 50(h) 11-13/16 x 8-1/4 x 2” 300(l) x 210(w) x 50(h) 11-13/16 x 8-1/4 x 2” 500W RMS x 1 @ 4Ω 1% THD+N 150W RMS x 4 @ 4Ω 1% THD+N 80W RMS x 4 + 250W RMS x 1 @ 4Ω 1% THD+N 850W RMS x 1 @ 2Ω 1% THD+N 220W RMS x 4 @ 2Ω 1% THD+N 130W RMS x 4 + 330W RMS x 1 @
LEVEL CONTROL This control is used to match the input level of the amplifier to the output level of you head unit. We recommend the following method. NOTE: Remove screws and the top cover of amplifier to access controls. 1. Turn the amplifier level to zero 2. Turn the volume of the head unit to ¾ and the bass and treble to zero 3. Adjust the level control until the desired maximum volume is achieved without distortion. 4. Failure to follow these steps may cause permanent damage to the audio system.
AMPLIFIER DIMENSIONS All dimensions provided are in millimeters (mm) unless indicated 1/4 6.
CA-DA12250 - CONTROL DESCRIPTIONS 1 2 10 3 4 11 1. SPEAKER OUTPUT: Connect your subwoofer(s) to these terminals. NOTE: The positive (+) and negative (-) are internally linked. 2. REMOTE LEVEL CONTROL CONNECTION: Connect the optional (supplied) Remote Level Controller to this socket. 3. RCA INPUT: Connect these RCA connectors to a head unit with a low level output connection. 4. RCA OUTPUT: Use these RCA connectors to connect to a secondary amplifier.
CA-DA41400 - CONTROL DESCRIPTIONS 1 2 3 10 4 5 6 7 8 9 13 14 11 15 12 1. SPEAKER OUTPUT: Connect your speakers to these terminals. 2. RCA OUTPUT: Use these RCA connectors to connect to a secondary amplifier. This output is a pass-thru connection derived from the RCA input connectors so that the signal level and frequency response is the same as the original input signal. 3. REAR RCA INPUT: Connect these RCA connectors to a head unit with a rear low level output connection. 4.
CA-DA51600 - CONTROL DESCRIPTIONS 1 2 3 4 1. SPEAKER OUTPUT: Connect your speakers to these terminals. 11 3. REAR RCA INPUT: Connect these RCA connectors to a head unit with a rear low level output connection. 12 5. REMOTE LEVEL CONTROL CONNECTION: Connect the optional (supplied) Remote Level Controller to this socket. 6. POWER AND STATUS LED’S: This displays “green” if the amplifier has been correctly powered up and ‘red’ if any faults are present. 7.
RECORD YOUR PURCHASE DETAILS HERE: SERIAL NUMBER DATE OF PURCHASE AFFIX RECEIPT HERE www.fusionelectronics.com FUSION Electronics New Zealand FUSION Electronics Australia FUSION Electronics Europe FUSION Electronics USA Ph: +64 9 369 2900 Ph: +61 1300 736 012 Ph: +44 845 299 7586 Ph: +1 623 580 9000 For further product and installation information, please visit www.fusionelectronics.com Pour plus d’informations sur les produits et l’installation, rendez-vous sur www.fusionelectronics.