POWERPLANT SUBWOOFER MODELS PP–SW10E, PP–SW12E, PP–SW15E, PP–SW10H, PP–SW12H, PP–SW15H
FUSION CULTURE There’s no point doing something if no one notices. We’ve always believed the way to make things happen is by getting noticed. From our product, to our demo cars, to our events, FUSION is about making some noise. Now you are ready. Step out of the shadows and announce you’ve arrived in a world where the old limits are left behind. Where technology is creatively combined with the latest in product innovation.
TABLE OF CONTENTS • SUBWOOFER FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 4 • SUBWOOFER THEILE/SMALL PARAMETERS . . . . . . . . . . . . . . . . . . . . . .pg 5 • SUBWOOFER DIMENSIONS PP-SW10E . . . . . . . . . . . . . . . . . . . . . . . . . .pg 7 • SUBWOOFER DIMENSIONS PP-SW12E . . . . . . . . . . . . . . . . . . . . . . . . . .pg 8 • SUBWOOFER DIMENSIONS PP-SW15E . . . . . . . . . . . . . . . . . . . . . . . . . .pg 9 • SUBWOOFER DIMENSIONS PP-SW10H . . . . . . . .
SUBWOOFER FEATURES FUSION subwoofers are low frequency drivers capable of delivering extremely high bass levels from small enclosures. In order to achieve the maximum performance from your new FUSION Subwoofer, please use one of the recommended sized enclosures that best suits your application. Sealed and vented enclosure sizes can be found in this manual. BASKET PowerPlant Subwoofers feature a uniquely high pressure cast aluminium basket.
SUBWOOFER THEILE/SMALL PARAMETERS Subwoofer Parameters PP-SW10E PP-SW12E PP-SW15E MAX Power Rating (Watts) 750 900 1200 RMS Power Rating (Watts) 250 300 400 Coil Height (Hvc) (mm) 25 25 25 Compliance (Cms) (uM/N) 281.69 248.25 148.67 Cone Area (Sd) 31.41 49.09 80.42 D.C.Coil Resistance (Re) 1.81 1.82 1.79 Electrical Q (Qes) 0.46 0.39 0.56 Force Factor (BL) 9 10.38 10.9 Free Air Resonance (Fs) Frequency Response (Hz) Gap Height (Hag) (mm) 31.02 27.64 28.
SUBWOOFER THEILE/SMALL PARAMETERS cont... Subwoofer Parameters PP-SW10H PP-SW12H PP-SW15H MAX Power Rating (Watts) 900 1200 1500 RMS Power Rating (Watts) 300 400 500 Coil Height (Hvc) (mm) 28 28 28 Compliance (Cms) (uM/N) 291.8 171 147.72 Cone Area (Sd) 31.41 49.09 80.42 D.C.Coil Resistance (Re) 1.75 1.85 1.75 Electrical Q (Qes) 0.41 0.411 0.457 Force Factor (BL) 8.88 11.61 12.08 Free Air Resonance (Fs) Frequency Response (Hz) Gap Height (Hag) (mm) 29.62 31.02 28.
DIMENSIONS SUBWOOFER PP-SW10E 282mm (11– 1/8") 240mm (9 – 7/16") 184mm (7–1/4") 161mm (6 – 3/8") 282mm (11–1/8") 282mm (11–1/8") 7
DIMENSIONS SUBW00FER PP-SW12E 333mm (13–1/8") 291mm (11– 7/16") 333mm (13 –1/8") 8 191mm (7–9/16") 168mm (6– 5/8") 333mm (13 –1/8")
DIMENSIONS SUBWOOFER PP-SW15E 410mm (16–1/8") 366mm (14 – 7/16") 210mm (8 –1/4") 183mm (7–1/4") 410mm (16 –1/8") 410mm (16 –1/8") 9
DIMENSIONS SUBW00FER PP-SW10H 282mm (11–1/8") 240mm (9 –7/16") 282mm (11–1/8") 10 198mm (7–13/6") 175mm (6 –7/8") 282mm (11–1/8")
DIMENSIONS SUBWOOFER PP-SW12H 333mm (13 –1/8") 291mm (11– 7/16") 205mm (8 –1/8") 182mm (7– 3/16") 333mm (13 –1/8") 333mm (13 –1/8") 11
DIMENSIONS SUBW00FER PP-SW15H 410mm (16 –1/8") 366mm (14– 7/16") 410mm (16 –1/8") 12 224mm (8 –13/16") 197mm (7– 3/4") 410mm (16 –1/8")
ENCLOSURES All enclosures include port and subwoofer displacement. All ports are circle aero ports unless otherwise stated. Ported Enclosures: A ported enclosure is generally larger than a sealed enclosure Sealed Enclosures: A sealed enclosure will be the smallest enclosure you can build. It will have a tight low frequency response, but not as low as a ported enclosure. OPTIMUM ENCLOSURES PP-SW10E PP-SW12E PP-SW15E Volume (litres) Ported 35.41 67.11 87.44 Volume (cu.ft.) 1.25 2.37 3.
ENCLOSURE CONSTRUCTION All enclosures should be constructed from 18mm (3/4”) Medium Density Fibre board. Enclosures should be glued and screwed, because MDF is porous. FUSION recommends sealing the internal sides with a polyurethane sealer prior to installation.
ENCLOSURE TEST CURVES SUBWOOFER PP-SW10E SEALED Amplitude Response (dB-SPL/Hz at 1 m) with 750 watts 123 117 111 dB 105 99 93 87 81 5 10 50 100 500 1000 20K 500 1000 20K Hz PORTED Amplitude Response (dB-SPL/Hz at 1 m) with 750 watts 123 117 111 dB 105 99 93 87 81 5 10 50 100 Hz 15
ENCLOSURE TEST CURVES SUBW00FER PP-SW12E SEALED Amplitude Response (dB-SPL/Hz at 1 m) with 900 watts 125 119 113 dB 107 101 95 89 83 5 10 50 100 500 1000 20K 500 1000 20K Hz PORTED Amplitude Response (dB-SPL/Hz at 1 m) with 900 watts 126 120 114 dB 108 102 96 90 84 5 10 50 100 Hz 16
ENCLOSURE TEST CURVES SUBWOOFER PP-SW15E SEALED Amplitude Response (dB-SPL/Hz at 1 m) with 1200 watts 127 121 115 dB 109 103 97 91 85 5 10 50 100 500 1000 20K 500 1000 20K Hz PORTED Amplitude Response (dB-SPL/Hz at 1 m) with 1200 watts 127 121 115 dB 109 103 97 91 85 5 10 50 100 Hz 17
ENCLOSURE TEST CURVES SUBW00FER PP-SW10H SEALED Amplitude Response (dB-SPL/Hz at 1 m) with 900 watts 123 117 111 dB 105 99 93 87 81 5 10 50 100 500 1000 20K Hz PORTED Amplitude Response (dB-SPL/Hz at 1 m) with 900 watts 123 117 111 dB 105 99 93 87 81 5 10 50 100 500 Hz 18 1K 5K 10K 20K
ENCLOSURE TEST CURVES SUBWOOFER PP-SW12H SEALED Amplitude Response (dB-SPL/Hz at 1 m) with 1200 watts 126 120 114 dB 108 102 96 90 84 5 10 50 100 500 1000 20K 500 1000 20K Hz PORTED Amplitude Response (dB-SPL/Hz at 1 m) with 1200 watts 126 120 114 dB 108 102 96 90 84 5 10 50 100 Hz 19
ENCLOSURE TEST CURVES SUBW00FER PP-SW15H SEALED Amplitude Response (dB-SPL/Hz at 1 m) with 1500 watts 129 123 117 dB 111 105 99 93 87 5 10 50 100 500 1000 20K 500 1000 20K Hz PORTED Amplitude Response (dB-SPL/Hz at 1 m) with 1500 watts 129 123 117 dB 111 105 99 93 87 5 10 50 100 Hz 20
TECH TIPS POWER CABLE CALCULATOR TOTAL AMPERAGE 0-4 FT 4-7 FT 7-10 FT 10 -13 FT 13-16 FT 16-19 FT 19-22 FT 22-28 FT 0 – 20 14 12 12 10 10 8 8 8 20 – 35 12 10 8 8 6 6 6 4 35 – 50 10 8 8 6 4 4 4 4 50 – 65 8 8 6 4 4 4 4 2 65 – 85 6 6 4 4 2 2 2 0 85 – 105 6 6 4 2 2 2 2 0 105 – 125 4 4 4 2 0 0 0 0 125 – 150 2 2 2 0 0 0 0 0 The above chart shows cable gauges to be used, if no less than a 0.5 volt drop is acceptable.
SUBWOOFER RULER GUIDE Use the FUSION ruler guide to create a perfect subwoofer mounting surface. Fig. 1 1: Mark the centre position on the MDF (Medium Density Fibre) board where the subwoofer is to be mounted.
0 10 20 30 40 50 Centre 0 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 2 3 240 250 260 10" cutout � � � ��usionc� r� udio�com 1 4 5 6 7 8 9 270 280 10" outside 263mm 10 11 290 310 300 12" cutout 12 320 330 340 360 350 13 370 380 15" cutout 12" outside 312mm 14 15 390 (mm) 400 15" outside 389mm 16 (inch) Fig. 3 3: Insert a pencil into the correct subwoofer cut out measurement. 10", 12", or 15".
SERIES AND PARALLEL SUBWOOFER WIRING FOR DUAL VOICE COIL SUBS Parallel Voice Coil Wiring (2 Ohm operation) To wire a DVC subwoofer in parallel (to get 2 Ohms), use two short pieces of speaker wire and link the positive from one coil to the positive of the second coil, and do the same for the negative as shown in fig 1. Then wire the amplifier to opposite sides of the subwoofer in order to equalise any connection resistance. - + Fig.
PARALLEL WIRING FORMULA FOR 2 SPEAKERS 4 Ohm 8 Ohm 2.67 Ohms R1 x R2 R1 + R2 = 4 Ohms x 8 Ohms LOAD IMPEDANCE 4 Ohms + 8 Ohms = 32 12 = 2.
TROUBLE SHOOTING No sound from your subwoofer: Check amplifier and wiring connections. Distorted sound: Check the connections from amplifier, processor or head unit. Subwoofer makes unusual noise in sealed enclosure: The enclosure may have leaks causing a lack of back pressure. Remove the subwoofer and ensure the enclosure is completely sealed. Use sealer and polyurethane to do this. Ported enclosure makes an unusual noise: Possibly due to incorrect port used.
NOTES � � � � � � � � � � � � � � � � � � YOU CAN HELP PROTECT THE ENVIRONMENT! Please remember to respect the local regulations: Hand in the non-working electrical equipment to an appropriate waste disposal center. PUBLISHED BY FUSION ELECTRONICS LIMITED: © Copyright 2006 by FUSION Electronics Limited. All rights reserved. Specifications and design are subject to change without notice.
Specifications and design are subject to change without notice.