Warranty

Hardware Care, Maintenance and Warranty

Fusion products are available in a wide range of uniquely styled finishes that are designed to perform

for a lifetime of normal use. However, please take care not to expose your Fusion products to harmful

construction materials. Wall paints, cabinet or molding stains and chemicals used to clean tile or marble

can all damage the finish coat of your Fusion products. Ideally install your Fusion products after these

steps, or wrap well with plastic and tape if that is not possible.

Finish Care for all Interior Locksets

• Do not use cleaners containing ammonia, bleach, acid or chemicals that may damage the finish.

• Use a mild soap solution such as dishwashing soap and water, rinse and

be sure to wipe the entire surface dry.

• Use only a soft cloth or nonabrasive sponge to wipe surfaces clean.

Additional Finish Care for Exterior Exposed Locksets:

To provide additional protection from the effects of sun and rain exposure, the full exterior of the lock can

be waxed. A nonabrasive auto paste wax such as a “Carnauba” type can be applied annually to maintain

the appearance. Do not apply wax to the lock cylinder as it may affect the cylinder operation.

Maintenance for Active Exterior Door Hardware:

Fusion locks are built for years of use under normal residential conditions. In extreme environments such

as coastal locations, they can be kept operating at top level with simple lubrication. Lock cylinders are

built of solid brass and need to be lubricated with “Triflow with Teflon” and then operated to distribute

the lubricant. This will keep the cylinder operating smoothly. After applying, wipe off any excess surface

lubricant.

Fusion Hardware Group Inc.

3145 Northwoods Parkway, Building 100

•

Norcross, GA 30071

•

877.215.4683

•

www.fusionhardware.com

PAGE 1
Hardware Care, Maintenance and Warranty Fusion products are available in a wide range of uniquely styled finishes that are designed to perform for a lifetime of normal use. However, please take care not to expose your Fusion products to harmful construction materials. Wall paints, cabinet or molding stains and chemicals used to clean tile or marble can all damage the finish coat of your Fusion products.
PAGE 2
Lifetime Limited Warranty Fusion Hardware Group, Inc. warrants that there shall be no defects in workmanship, materials, operation or finish of our product for the lifetime of the original owner. Fusion at its discretion will repair or replace the defective components or products and return to the purchaser. The nature of some specialty finishes and materials are designed and manufactured to age and change naturally over time.