User Guide
Quick Start Guide
*
Step 1 Step 2 Step 3 Step 4 Step 5
Remove
Paper Protector
Lower Locking Bar
and remove Lid. Discard
paper protector
from inside the juicer.
Wash all parts and
reassemble. Replace Lid
and secure Locking Bar.
Line up Juice Spout
Into Pitcher
Juicer Spout must be
in downward position
when juicing to avoid
leaking from the sides
of the machine.
(Remember to line up the
pitcher beneath the Spout.)
Plug In
Plug Power Cord
into 120-volt
wall outlet.
(This plug will
t only one way
in a polarized outlet.)
Turn Power Switch
“ON”
Switch will be
illuminated when
in the “ON” position.
(Machine must be
turned on and running
for approximately 5–10
seconds before produce
is inserted into the Chute.)
Add Fresh Fruits
and Vegetables
Remove Pusher and insert
fresh fruits and vegetables.
Push fruits and vegetables
gently through the Chute
using the Pusher. (Pushing
too hard or overloading the
chute may jam the motor.)
Wash All Components Before First Use.
FJ_JACK 100 _QUICKS__ENG_V2_171011
*
See owner’s manual for
complete instructions
and important safety
information before
using this product.
Step 6
Cleaning
For easiest cleanup, wash
juicer parts immediately
after juicing. Place
dishwasher-safe parts
on the top rack only.
NOTE: Sometimes you may need to
clear up food excess when making
large quantities of juice. To do this:
unplug unit, remove lid, clean blade
assembly and pulp Chute.