FUSION Apollo™ MS-ERX400 ® OWNER’S MANUAL ENGLISH
© 2020 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.fusionentertainment.com for current updates and supplemental information concerning the use of this product.
Table of Contents Getting Started Controls Using the Dial to Select Items Entering Text Remote Control Screen Naming the Device Setting the Home Zone Selecting a Source Adjusting the Backlight Brightness Adjusting the Volume Muting all Connected Stereos Adjusting the Subwoofer Level Maintaining Individual Zone Volume Levels Turning Off Devices on the Network Fusion PartyBus Networking Creating a Group Editing a Group Leaving a Group Grouped Stereo Functions Grouped Stereo Source Considerations General Se
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. The ERX400 wired remote control is an optional accessory for compatible Fusion stereos. For a list of compatible stereos, go to garmin.com/account/register/ or consult your Fusion dealer. To help you understand how the remote control works, this manual contains general operational instructions and information about settings for the remote control.
Controls Dial • • • • • Turn to adjust the volume. When adjusting the volume, press to switch between zones. Turn to move through the menus or adjust a setting. When in a menu, press to select the highlighted option. Press and hold to activate certain functions such as opening the radio presets or muting all connected stereos from the mute screen (Muting all Connected Stereos, page 5). • Press to turn on the remote control. • Press to mute and un-mute the audio.
• BT or USB: Press to pause or resume the current track. • AM/FM: ◦ Press to cycle through the tuning modes (auto, manual, and presets). ◦ Press and hold to save the current station as a preset. • SIRIUSXM source: ◦ Press and hold to switch between Replay Mode and Live Mode. ◦ In Live Mode, press to cycle through the tuning modes (Manual, Category, and Preset). ◦ In Replay Mode, press to pause and play. • DAB: ◦ Press to scan for DAB stations. ◦ Press and hold to save the current station as a preset.
Remote Control Screen The information displayed on the screen varies depending on the source selected. This example shows a track playing on a device connected using Bluetooth wireless technology.
Selecting a Source . 1 Select 2 Turn the dial to highlight a source. NOTE: If the device is part of a group, continue turning the dial to access the sources on other devices in the group (Fusion PartyBus Networking, page 6). If a source cannot be shared with the group, it will appear gray and you cannot select it. 3 Press the dial to select the source. Adjusting the Backlight Brightness 1 Select > BRIGHTNESS. 2 Adjust the brightness level.
Maintaining Individual Zone Volume Levels If you adjust the volume levels of individual zones so that some zones are louder than others, the individual zone volume settings are all affected when you adjust the volume for ALL zones. By default, if you adjust the volume for ALL to 00, this sets of the volume levels for all zones to 00 and resets all individual zone volume adjustments.
Editing a Group 1 2 3 4 > GROUPS. Select Select the name of an existing group. Select the stereos you want to add to or remove from the group. Select DONE. Leaving a Group You can leave the Fusion PartyBus group to play local sources on the stereo. 1 Select > GROUPS. 2 Select the name of the existing group you want to leave. 3 Select the stereos you want to remove from the group. 4 Select DONE.
General Settings Select , select the name of the remote control, and select SETTINGS. NOTE: If you select the name of the currently-controlled stereo before you select SETTINGS, you can adjust the settings of the stereo instead of the remote control. When a stereo is in a group, you cannot change settings on that stereo. The following setting descriptions apply to the remote control only. For information about stereo-specific settings, see the stereo owner's manual.
Setting a Static IP Address If the stereo is configured as a static IP, it is automatically assigned the IP address of 192.168.0.1. You can change this IP address. If the stereo is a DHCP client on the network and you do not want the DHCP server to automatically assign an IP address to the stereo, you can set a static IP address. NOTE: Every device on the network must have a unique IP address.
Updating the Remote Control Software Using a USB Flash Drive You can update the remote control software using a USB flash drive through a compatible stereo on the network. NOTICE Do not turn off the device or disconnect the power during a software update. Turning off the power during a software update may cause the device to become unresponsive. NOTE: • You cannot update the software using a USB flash drive formatted using the NTFS file system.
Troubleshooting The stereo does not respond to key presses until the stereo turns off, and turn it on again to reset the stereo. • Hold • Disconnect power to the stereo for two minutes to reset the stereo. Network Troubleshooting If you cannot see or connect to Fusion PartyBus devices on the network, check the following: • Verify that only one device, either a stereo or a router, is configured as a DHCP server.
Specifications Dimensions (W × H) 11 × 7 cm (4.32 × 2.76 in.) Dust cover dimensions (W × H) 11.8 × 8 cm (4.66 × 3.15 in.) Weight (excluding cable) 100 g (3.5 oz.) Input voltage From 10.8 to 32 Vdc negative ground Current (normal operation at 12 Vdc) 150 mA Current (normal operation at 14.4 Vdc) 125 mA Current (device off) Less than 50 mA Fuse 1 A ATO blade-type Compass-safe distance 15 cm (6.1 in.
Index B backlight 5 brightness 5 D device cleaning 9 registration 9 F factory settings 8 Fusion PartyBus network 8 G groups 7 creating 6 editing 7 H home zone 4 I icons 11 K keys 3, 8 L language 8 M mute 5 N name 4 network 6, 7, 9, 11 P power 6 product registration 9 R registering the device 9 S settings 6, 8 software, updates 10 source 5, 7 speaker zones 5 home 4 subwoofer 5 T tone 8 troubleshooting 11 V volume, adjusting 5, 6 W Wi‑Fi technology 8 Index 13
FUSION SUPPORT New Zealand 09 369 2900 Australia 1300 736 012 Europe +44 (0) 370 850 1244 USA 623 580 9000 Pacific +64 9 369 2900 SUPPORT.GARMIN.
