Owner's Manual
Table Of Contents
- User / Installation Manual
- Reset
- USB Device Compatibility
- Care and Maintenance
- Table of Contents
- Installation
- Parts & Controls
- General Operation
- Radio Operation
- USB Operation
- AUX Operation
- iPod / iPhone Operation
- Android Device Operation
- Bluetooth Operation (Bluetooth Module Required)
- SiriusXM Operation
- Zone Operation
- Additional Features
- Menu Structure
- Troubleshooting
- Specs
- Dimensions
- Mounting Template
- Warranty
PADLOCK
ICON
The padlock icon
means
the
channel
is locked
or
considered
mature
content. If you select
this
channel
you
will
be
asked to
unlock
parent mode,
if
it is
not already unlocked.
PRESET
TUNING
MODE
Press 'Play· to cycle to preset
tuning
mode. Press the 'Previous'
or
'Next'
button to select
previous
or
next preset.
Note: Preset
function
is only available when
more
than one
preset
has been saved.
PRESETS
Add
your
channel
preset to
your
favourites
list
by
selecting 'Add Preset' (Maximum
15
channels). Remove channels by selecting ·Remove Preset'. Select 'All'
or
the individual
channel. Exit
by
pressing the
'Menu'
button.
Alternatively: Press and hold the 'Play· button to store favourite.
PARENTAL
MODE
ENABLE ON/OFF
Select to enable channels to
be
locked/unlocked
PIN
#
Turn the 'Rotary Encoder' to select
number
and press to enter, repeat to
enter
the 4
digit
code. [Factory
setting
is 0000)
Note: Must
be
entered before the following
items
are operational.
LOCK
I
UNLOCK
Select the
channel
to
be
locked
or
unlocked
CHANGE
PIN
Personalise
your
Pin number. [4
digits
max)
PIN
RESET
When
on
SiriusXM source, press & hold mute key
for
15
seconds. PIN
will
be
reset to
·oooo·.
ZONE
OPERATION
The MS-RA205
Marine
Stereo features
Multi-Zone
technology
which
enables 2 'Zones'
with
independent
volume
control.
ZONE
SETUP
Press the 'Menu· button and select 'Settings'. Select 'Zones' then the Zone
you
wish to setup.
BALANCE
Select
'Balance'
to adjust the balance
from
left
to right.
VOLUME
LIMIT
Select 'Volume
Limit'
to set the desired
maximum
output volume
for
each individual Zone.
ZONE
NAME
Select 'Zone
Name'
to give the zone a name of
your
choice. Rotate the rotary encoder to
change the character. Press the
rotary
encoder
to select. Press the 'Previous' button to
delete
characters-
To
save changes press the 'Play·
key-
To
exit
without
saving any
changes:
pressthe'Menu'
ke~
23