Owner's Manual
Table Of Contents
My
Head unit keeps turning itself off then back
on
when connected
to
my
iPod
This could
be
happening due
to
corrupt
files
and/
or
a
corrupted
version of the operating soft-
ware on your iPod. If
you
connect
to
your
computer
you may
get
a message
on
the iPod similar
to
this: "The iPod 'John's iPod' could
not
be
updated because
the
firmware
was corrupt.
Click this link
to
get
a step-by-step guide
to
solve this issue:
http:/
jsupport.apple.comjkb/
ts1813."
Why
does my FUSION Head unit keep locking
up
when connected
to
my iPodjiPhone?
If you are experiencing software lock-ups
or
your unit freezes:
• Reset the Head unit
by
holding down
the
power button
for
1 0 seconds
or
pressing the
reset
button inside the face plate.
• Reset your Apple iPhone
by
powering down and then
restarting
the
phone.
•
•
Reset your iPod (see Apple website
from
model-specific information). This should resume
normal operation.
Make sure
you
have
the
latest version of iTunes and
the
latest operating software
in
your
iPodjiPhone. It is
important
to
update software when Apple releases new versions. If
you
are connected
via
a dock, ensure
you
are using the
correct
sleeve and the connection
to
the
Head unit is secure.
Will my iPodjiPhone connect
to
my
FUSION product if the
battery
is
flat?
No. It will take a
number
of minutes
for
the Apple
product
to
get
a minimum level of charge
before
it
can connect and become operational. Please connect and
wait
for
the unit
to
initialise.
My
iPodjiPhone will not connect
to
the Head unit while
in
the
dock.
If your Head unit displays "No iPod connected" while using iPod as input source:
• Check
that
you
are using
the
correct
sleeve combination. If
you
have the
incorrect
sleeve
combination this could prevent the iPod connector
from
mating correctly. It could also
damage
the
connector
in
the
dock
or
your
iPodjiPhone
itself.
If
you
are uncertain which iPod model
you
have, go
to
http:/
jwww.apple.com/
support/
to
get
the
correct
model information
for
your iPod and sleeve.
If
you
are still unable
to
connect once
you
know
for
certain
you
have the
correct
iPodjiPhone-
sleeve combination:
• Ensure
that
you
have
the
latest version of operating software installed
in
your
iPodjiPhone
and the latest iTunes version.
To
do this, connect your
iPodjiPhone
to
iTunes and
it
will
check and, if necessary,
prompt
you
to
download the latest version.
If
you
are still unable
to
connect once
you
have confirmed
that
you have
the
latest software
or
you have updated your iPodjiPhone:
• Reset the
iPodjiPhone
(see the
user
manual
for
your Apple product) and also
reset
the
Head unit [see
FUSION
user
manual].
If
you
are still unable
to
connect:
• Contact your
FUSION
dealer
or
contact
FUSION
via
the
tech
email.
25