User manual

44
Regular cleaning
It is recommended to wash the inside of the
refrigerator in 3-4 weeks time.
Household cleaner or soap must not be used.
After you made it no-current wash the appliance using
lukewarm water and wipe it.
Clean the magnet door rubber profile with clean water.
After cleaning plug the appliance to the mains socket.
It is practical to clean and defrost the ice-making
compartment at a time and when it is empty.
Dust and dirt collected on the back of the refrigerator,
condenser is recommended to be removed once or
twice a year.
When the refrigerator is not in use
In case the appliance will not be used for a long time
follow these steps:
Break the circuit of the appliance.
Remove foods from the refrigerator.
Defrost and clean it as written before.
Leave the door open to avoid a build up of air inside.
GB
How to defrost it:
Break the circuit of the appliance or turn thermostatic
control knob into „0” position.
Empty the ice box. Wrap foods inside into newspaper
and put them on a cool place or into another
appliance.
Leave the door of the appliance and ice-making
compartment open.
Defrosting usually takes several hours. When finished,
pour defrost water gathered out of the tray and wipe
the surfaces dry.
Apply voltage to the appliance or turn thermostatic
control knob to middle („3”) position.
Put foods taken out back to their places.
Trouble shooting
How to change the bulb
Should the light fail to work you can change it as
below:
Break the circuit of the appliance.
Unscrew the plate screw fixing the lamp cover, then
take the lamp cover off in the direction of arrow and
the bulb can be changed. (Type of the bulb: Mignon
322, 230 V, 15 W, E 14 thread)
After changing bulb replace the lamp cover, screw the
plate screw and apply voltage to the appliance.
The lack of light does not influence operation of the
refrigerator.