32962660_EN.qxd 25/07/2008 16.
132962660_EN.qxd 25/07/2008 16.52 Page 2 Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance.
132962660_EN.qxd 25/07/2008 16.52 Page 3 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
132962660_EN.qxd 25/07/2008 16.52 Page 4 Use ● ● ● ● ● ● ● This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed. Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label. Do not overload the appliance. See the relevant section in the user manual. Before washing, ensure that all pockets are empty and buttons and zips are fastened.
132962660_EN.qxd 25/07/2008 16.
132962660_EN.qxd 25/07/2008 16.52 Page 6 Control panel and functions 1 2 Henceforth, the programme selector dial, the different buttons and the programme progress display will be indicated in all the book with the relevant numbers given in this table. Programme selector dial and On/Off switch 4 5 Key symbols: Information 1 3 ● = Rinse hold = Handwash The programme selector dial allows to select a programme and/or to switch the machine on/off.
132962660_EN.qxd 25/07/2008 16.52 Page 7 Functions RINSE HOLD By selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished, the pilot light of button 4 is off and the door is blocked to indicate that the water must be emptied out. To empty the water out, see «At the end of the programme». Options SUPER QUICK (Extra kurz/Rapide) Short cycle for lightly soiled items or for laundry which needs only freshening up.
132962660_EN.qxd 25/07/2008 16.52 Page 8 Programme table Programme/ Temperature COTTONS (Koch-/Buntwäsche Blanc/Couleurs) Type of laundry Cottons (heavily soiled cotton items) 90° to 30° Eco White and coloured (ECO/Coton ECO) cotton (normally soiled Options Description of programme Main wash Spin red./ Rinse Hold, Rinses Prewash, Super Quick Maximum spin speed at 800 rpm Spin red.
132962660_EN.qxd 25/07/2008 16.52 Page 9 Programme table Programme/ Temperature CURTAINS (Gardinen/Rideaux) 40° SOAK (Einweichen/Tremp.
132962660_EN.qxd 25/07/2008 16.52 Page 10 Programme information Eco This programme can be selected for slightly or normally soiled cotton items. The temperature will decrease and the washing time will be extended. This allows to obtain a good washing efficiency by saving energy. Easy Iron Selecting this programme, the laundry is gently washed and spun to prevent fabrics from creasing. In this way ironing is easier. Furthermore the machine will perform additional rinses.
132962660_EN.qxd 25/07/2008 16.52 Page 11 Drain For emptying out the water at the end of a programme with Rinse Hold option. Turn first the programme selector dial to «O», then select programme «Drain» and depress the button 4. Spin Separate spin for cotton items washed by hand. According to the type of fabric, it is possible to choose a different speed by means of the relevant button from one proposed by the machine.
132962660_EN.qxd 25/07/2008 16.52 Page 12 Laundry weights The following weights are indicative: bathrobe napkin quilt cover sheet pillow case tablecloth towelling towel tea cloth night dress ladies’ briefs man’s work shirt man’s shirt man’s pyjamas blouse men’s underpants 1200 g 100 g 700 g 500 g 200 g 250 g 200 g 100 g 200 g 100 g 600 g 200 g 500 g 100 g 100 g Removing stains Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing.
2962660_EN.qxd 25/07/2008 16.52 Page 13 The washing machine incorporates a recirculation system which allows an optimal use of the concentrated detergent. Pour liquid detergent into the dispenser drawer compartment marked just before starting the programme. Any fabric softener or starching additives must be poured into the compartment marked before starting the wash programme.
132962660_EN.qxd 25/07/2008 16.52 Page 14 Operating sequence Load the laundry Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. Measure out the detergent and the fabric softener At the end of the programme the selector dial must be turned to position «O», to switch the machine off.
132962660_EN.qxd 25/07/2008 16.52 Page 15 Altering an option or a running programme It is possible to change any option before the programme carries it out. Before you make any change, you must pause the washing machine by pressing the button 4. Changing a running programme is possible only by resetting it. Turn the programme selector dial to «O» and then to the new programme position. Start the new programme by depressing the button 4 again. The washing water in the tub will not empty out.
132962660_EN.qxd 25/07/2008 16.52 Page 16 Care and cleaning IMPORTANT! You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Remove the drawer by pressing the catch downwards and by pulling it out. Flush it out under a tap, to remove any traces of accumulated powder. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
132962660_EN.qxd ● ● 25/07/2008 16.52 Page 17 Remove any objects from the pump impeller by rotating it. Put the cap back on the emergency emptying hose and place the latter back in its seat. ● Screw the pump cover fully in. ● Close the pump door. IMPORTANT! When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty.
132962660_EN.qxd 25/07/2008 16.52 Page 18 What to do if... IMPORTANT! Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below. During machine operation it is possible that the red pilot light of button 4 flashes to indicate that the machine is not working. Once the problem has been eliminated, press the button 4 to restart the programme.
132962660_EN.qxd 25/07/2008 16.52 Malfunction Page 19 Possible Cause / Solution The drain hose is squashed or kinked. (Red pilot light flashes) ● Check the drain hose connection. The machine does not empty and/or does not spin: The drain pump is clogged. (Red pilot light flashes) ● Clean the drain pump. The laundry is not evenly distributed in the drum. ● Redistribute the laundry. The «Rinse Hold» option has been selected. ● Select the «Drain» or «Spin» programme.
132962660_EN.qxd 25/07/2008 16.52 Malfunction The door will not open: Page 20 Possible Cause / Solution The programme is still running. ● Wait the end of washing cycle. The door lock has not been released. ● Wait until the door is released. There is water in the drum. ● Select drain or spin programme to empty out the water. The transit bolts and packing have not been removed. ● Check the correct installation of the appliance. The machine vibrates or is noisy: The support feet have not been adjusted.
... ... If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. ... Page 21 No. 16.52 .. Ser. 25/07/2008 Mod. Prod ... . No. ... ... ... ... 132962660_EN.qxd Mod. ... ... ... Prod. No. ... ... ... Ser. No. ... ... ...
132962660_EN.qxd 25/07/2008 16.52 Page 22 Consumption values Energy consumption (in kWh) Water consumption (in litres) Programme duration (in minutes) Cotton 90° 1.9 58 135 Cotton 60° 1.2 54 115 Eco 60° (*) 0.95 49 150 Synthetics 60° 0.75 45 85 Delicates 40° 0.5 57 65 Wool 40° 0.
132962660_EN.qxd 25/07/2008 16.52 Page 23 Installation instruction Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom. 2. Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance.
132962660_EN.qxd 25/07/2008 16.52 Page 24 If necessary, check the setting with a spirit level. Water inlet The inlet hose is already screwed on the back of the appliance. 1. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap (see picture). HEC0006 2.
132962660_EN.qxd 25/07/2008 16.52 Page 25 Attention! Connect the machine to an earthed socket. The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution. NOTE Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown. Attention! Should the appliance power supply cable need to be replaced, this MUST be carried out by our Service Centre.
132962660_EN.qxd 25/07/2008 16.52 Page 26 Unsere Kundendienst-Telefonnummer: Le numéro de téléphone de notre service après-vente: Il nostro numero di telefono del servizio clientela: Our customer service telephone number: 0848 559 111 oder unter ou sur Internet oppure su Internet or in the internet www.fust.ch Dipl. Ing FUST AG Buchental 4 9245 Oberbüren Tel. (071) 955 50 50 Dipl. Ing. FUST AG Riedmoosstrasse 3172 Niederwangen-Bern Tel. (031) 980 11 11 Dipl. Ing.
132962660_EN.qxd 25/07/2008 16.
132962660_EN.qxd 25/07/2008 132 962 660 - 00 - 312008 16.
