Operation Manual

14
Description Of Functions
Throttle EPA (only 2PHKA)
Steering D/R (only 2PHKA)
This function is used to adjust the forward and brake side servo travel. Each direction can
be adjusted independent of each other. Use this feature to set the throttle servo travel.
Use this function to adjust the steering travel of your model. If the model understeers
(push) while cornering, add steering by turning the dial clockwise. When the model
oversteers (loose), take away steering by turning the dial counterclockwise.
Warning
Be sure that your throttle linkage does not
apply excessive force to the servo.
If your linkage installation causes an unreason-
able amount of force to be applied to the servo,
the servo may be damaged and result in loss of
control.
Steering EPA (only 2PHKA)
Use this function to limit the servo movement to the left or right. The servo travel to each
side can be independently adjusted. This feature will compensate for any difference in right
or left turning angles or radius due to the characteristics of your model.
Warning
Be sure that the steering linkage does not
bind or come in contact with any suspen-
sion parts or arms.
If unreasonable force is applied to the servo, the
servo may be damaged and result in loss of
control.
0 side: Travel Minimum
10 side: Travel Maximum
Steering EPA
Left side Right side
0 side: Travel Minimum
10 side: Travel Maximum
Throttle EPA
High side Low side
0 side: Travel Minimum
10 side: Travel Maximum
Steering D/R