Operation Manual

This function may be used to adjust the curves high and low side individually for each flight condition (normal, idle-up 1,
idle-up 2, idle-up 3, throttle hold).
GOAL of EXAMPLE: STEPS: INPUTS:
94
Set up a high pitch curve in the
idle-up 1 condition.
Store new settings after flight.
Where next?
Store the current dial settings prior to
selecting another model.
Close.
for one second to store.
or
HIGH/LOW PITCH (HI/LO-PIT):
Adjustability:
• You may define high and low side rate trim knobs (the high side pitch trim control is defined as the right side lever at
initial setting).
• The conditions are activated in the THR-CURVE functions (p.89).
• Both adjustments may be set to MAN, temporarily turning off the knob.
• Adjustments may be memorized and then return the knobs to center point to use that amount of adjustment. Allows easy
use of the trimming knobs for multiple models.
Open the HI/LO-PIT function.
Select the idle-up 1 condition.
Set the rate. (Ex: 80%)
for 1 second. (If basic, again.)
to HI/LO-PIT.
to IDL1.
to 80%.
to HI-PIT.
Optional: change which knob adjusts
high pitch curve.
to desired knob and direction.
VR(E) to center.
PIT-CURVE: see p. 89.
HOV-PIT: see p. 93.