Operation Manual

Model Setting Section

PIT—PITCH CURVE

The Pitch Curve function applies only to Heli-

copters. Its purpose is to select whether the pitch

curve function is to be used with the active model.

The pitch curve divides the full travel of the

stick into twelve segments separated by thirteen

points. The location of these points may be set

with the PCV key in the Condition menu.

Pitch Curve Activation Procedure

the

Model

Menu,

press

the PIT

key

get

the

Pitch Curve Activation menu.

Return to Model

Activate/Inhibit Keys

Pitch Curve Mode

Setting Button

Use the ACT ( F ) key to activate the curve setting.

and

use the INH (G) key

deactivate

the

curve.

End setting by pressing the

END

(N) key.

Model Setting Section, Page 58