User's Manual
30
REG06: Frequency Group [default value:C00]
•
Refer to p.18 F
REQUENCY
G
ROUPING
in Section 3, for a detailed description of the
frequency operation modes.
Method
Group Numbers
Frequencies
per Group
A 0
to
75
1
B 0
to
37
2
C 0
to
24
3
D 0
to
18
4
E 0
to
11
6
F 0
to
8
8
G 0
to
5
12
Table 5–2: Grouping of Frequency
REG07: RS485 Packet Interval [default value: 05H]
•
In the packet transmission mode with the RS485 mode is used, sets the interval
between response and/or received data which output from the modem to RS485 line.
•
Be able to set 0 to 254 ms at increment of 1 ms. 255ms is not allowed. The default
value is 5 ms.
•
Set this interval to a larger value than the receiving interval set by REG14.
•
Suitable setting of this interval avoids the data collision possibility of RS485 line.
REG08: Repeater 1 Address [default value: A00]
•
When a repeater is used, set the repeater1 address to pass through.
REG09: Repeater 2 Address [default value: A00]
•
When second repeater is used, set the repeater2 address to pass through.
REG10: Command Header [default value: 40H]
•
Sets the character that identifies the start of a command.
•
The default is character “@” (40H).
•
When this character is input from the terminal equipment after no character is
received for the command recognition interval (REG15) or longer, subsequent
input character is recognized as a command for the modem.