User's Manual

Ver.1.0
11
Trigger of the data transmission is delimiter at headerless packet transmission mode: 2
Trigger of the data transmission is time-out at headerless packet transmission mode 0
*1 If the setting value is less than 3ms, the value of “B” will be “3”.
*2 At headerless packet mode, the value of C is always 1.
The total time until completion of the data transmission is calculated by below formula.
× 1000 × (size of message in bytes + A + 4) + B + 6.4 × C + 1.5 Expression 2
A: Text data is transmitted at packet transmission mode: 9
Binary data is transmitted at packet transmission mode: 12
Trigger of the data transmission is delimiter at headerless packet transmission mode: 2
Trigger of the data transmission is time-out at headerless packet transmission mode: 0
B: Trigger of the data transmission is time-out at headerless packet transmission mode:
"Value of REG26" x 10 [If the bit 0 of REG24 is “1”]
"Value of REG26" x 1 [If the bit 0 of REG24 is “0”] (*1)
Others: 0
C: Data size of message is 0 to 26 bytes: 1 (*2)
Data size of message is 27 to 52 bytes: 2
Data size of message is 53 to 78 bytes: 3
Data size of message is 79 to 104 bytes: 4
Data size of message is 105 to 103 bytes: 5
*1 If the setting value is less than 3ms, the value of “B” will be “3”.
*2 At headerless packet mode, the value of C is always 1.
Bit length per byte
Line speed
of the sender