Instruction Manual

Tentative
11
5 Other functions
5.1 ID Registration
In order to associate the master and the slave, an ID code is used. Each wireless module has
a unique value.
For wireless communication, registration of the ID code of the communication partner is necessary.
Wireless machines without ID code registration are unable to communicate. This prevents improper
connections.
To make the pairing, in a state in which the closer to the master / slave, and then run the @IDS
command to both the master / slave. In the case of slave, it is possible to register up to two.
Please refer to the description of @IDS command for how the second unit of the specified.
If the pairing is successfully complete, "Pair" response is output, pairing ID code is written
to the memory. In order to perform the normal communication, please do the once reset.
If the pairing is not completed, approximately becomes a time-out within 5 seconds, it is returned
N0 response.
The slave is possible to register the master up to two.
However, communication is carried out in a one-to-one, you will not be able to communicate from
two masters. The slave keeps a connection with the master that initiated the first communication.