Instruction Manual

Tentative

6.4 Details of the command functions

The symbols used in this section have the following meaning:

[ ] : Required input parameter/s

( ) : Optional input parameter/s

ＡＲＧ：Display all register values

【Format】

ARG

【Response】

Setting list display

N0 : command error

【Function】

・ Refers to all contents of memory register. Displays a two-digit hexadecimal number plus H at

the end.

ＤＢＭ : Reference the reception intensity of received packet

【Format】

DBM

【Response】

-XXXdBm : reception intensity

N0 : command error

【Function】

・Reads the reception intensity of the most recent, correctly received packet, and displays it

in decibels.

・When none has been received after resetting, “-134dBm” is displayed.

・The signal strength indication is not absolute. It can be used for accurate relative measurements

but should not be considered an absolute value.

ＥＲＲ：Reference error status

【Format】

ERR

【Response】

xxH ：error status

N0 ：command error

【Function】

・This command display the error information of the internal this module. If 00H is no error.

・bit2＝1: memory (settings area) error

・bit1＝1: memory (user area) error

・bit0＝1: RF error