Instruction Manual

Tentative
22
Bit3：Receive level control
Table 15：Receive level control
0
Disable receive level control
1
Enable receive level control （default）
* When used with “Receive level control”, set to 1 in this bit.
* “Receive level control”turns LNA Off and decreases the reception level when communication
at the short distance.
Bit2～0：Reserved
* Not used in this machine. Make sure to set to 0.
* No function assignment.
ＲＥＧ１３：Reserved ［default：００Ｈ］
* Not used in this wireless module. Leave default setting.
ＲＥＧ１４～１８：Pairing ID code 1 ［default：００Ｈ］
* Sets an ID code for a pairing machine.
* Both the master and slave use this.
ＲＥＧ１９：Reserved ［default：００Ｈ］
* Not used in this wireless module. Leave default setting.
ＲＥＧ２０～２４：Pairing ID code 2 ［default：００Ｈ］
* Sets an ID code for a pairing machine.
* Only the slave use this.