User's Manual

󾾝
Warning
󾾝
Caution
18
Before Using
󾾛
Never plug it into an outlet of other than the indicated voltage.
Plugging the charger into the wrong outlet could result in an explosion or fire.
󾾛
Do not insert and remove the charger when your hands are wet.
It may cause an electric shock.
󾾙
Always use the special charger or a quick charger for digital proportional R/C sets to charge a
digital proportional R/C set Ni-MH battery.
Overcharging a Ni-MH battery can result in burns, fire, injuries, or loss of sight due to overheating, breakage, or electro-
lyte leakage.
󾾙
When the charger is not in use, disconnect it from the AC outlet.
Do this to prevent accidents and to avoid overheating.
Charge Of A LiFe Battery
(Example: When using the
FT2F1700B/2100B
with the special charger)
1
A LiFebattery is removed from T4PLS.
2
2P connector is removed from T4PLS.
3
Balance charge is carried out from the charger on-
ly for LiFe.
Charge the optional FT2F1700B/2100B (LiFe) battery with
the special charger in accordance with the instruction manual
supplied.
When the battery will not be used for a long time, to prevent it from deteriorat-
ing we recommend that it be kept in about the half capacity state instead of fully
charged. Also be careful that the battery does not enter the over-discharged state
due to self-discharge.
Periodically (about every 3 months) charge the battery.
4PLS-Eng-04-Before-P12-24.indd 18 2013/04/07 11:35:54