User's Manual

Setting item

STR :Steering (1st channel)

THR :Throttle (2nd channel)

CH3 :3rd channel

CH4 :4th channel

Move the cursor to "STR, THR,

CH3 and CH4" with the (JOG)

button.

Press

(HOME screen)

(MENU 2 screen)

(REVERSE screen)

Press

(MENU 1 screen)

Press

Select

"REVERSE"

Function

Servo Reverse "REV"

However, when the position set by trim or subtrim shifts from

the center, the center becomes the opposite side.

Servo Reverse "REVERSE"

(All channel)

This function reverses the direction of operation of the servos related to transmitter

steering, throttle, and channel 3 /4 operation.

(Preparation)

- Select the channel to be set by the (JOG) button up or down

operation.

(Servo reverse setting)

Use the (+) or (-) button to reverse the servo

operation direction.

NOR/REV can also be set by (JOG) button

left or right operation

(Each channel can be set similarly.)

Servo Reverse Function Setting

Select button

- Select with the (+) or (-) but-

tons.

Display to "REVERSE" screen by the following method:

When ending, move the cursor to [RT] by the (JOG) button,

and return to the MENU1 screen by pressing the (JOG) but-

ton.

4PLS-Eng-08-1-Function-P39-64.indd 44 2013/04/07 12:40:52