User's Manual

high
neutral
With "SPEED": Quick start without skidding
Without "SPEED": Slow start due to skidding
56
Function
Servo Speed "SPEED"
(Preparation)
- On the SPEED screen make the following adjustments:
1
(Delay adjustment)
On the SPEED screen, Select the setting item
THR "TURN" by the (JOG) button up or down
operation and use the (+) or (-) buttons to ad-
just the delay amount.
Throttle Speed adjustment
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value "100"
by pressing the (+) and (-) but-
tons simultaneously for about 1
second.
The throttle speed adjustment
can be controlled with digital dial or digital trim. With
the function select
switch dial function. (See page 65)
Dial / Trim Setting
-Throttle servo (ESC) operation is delayed so that the drive
wheels will not spin even if the trottle trigger is operated
more than necessary.
This delay function is not performed when the throttle trig-
ger is returned and at brake operation.
Operation
THR ( Throttle Speed)
Sudden throttle trigger operation on a slippery
road only causes the wheels to spin and the ve-
hicle cannot accelerate smoothly. Setting the
throttle speed function reduces wasteful battery
consumption while at the same time permitting
smooth, enjoyable operation.
100%1%
Servo operation is delayed.
Adjustment range
1~100%
At 100%, there is no delay.
2
When ending, return to the MENU1 screen by pressing the
(JOG) button.
4PLS-Eng-08-1-Function-P39-64.indd 56 2013/04/07 12:41:00