User's Manual

ManualsBrandsFutaba ManualsElectronicsRadio Control

Press

(HOME screen)

(MENU 1 screen)

(PROG MIX screen)

(MENU 2 screen)

Press

Select

PROG MIX

Function

Programmable Mix "PROG MIX"

This function allows you to apply mixing between the steering, throttle, channel 3 and

channel 4.

-When the steering or throttle channel is the master channel (channel that applies mix-

ing), trim data can be added. (Trim mode)

- The mixing mode selection. (Master mixing mode)

Relating function

steering :EPA, STR EXP, D/R, SPEED, 4WS

throttle :EPA, THR EXP, ATL, ABS, SPEED, BRAKE MIX, NT-BRK, ESC MIX, TH ACCEL

CH3 :EPA,BRAKE MIX,4WS

CH4 :EPA,BRAKE MIX,ESC MIX

Additional Functions

The movement of the master channel side will be added to the movement of the slave

channel side.

Movement of the slave channel side

Programmable Mix "PROG MIX"

(All channels)

Function SW

PROGMIX

Program mixing adjustment

(Preparation)

- When "PROG MIX" is turned ON and OFF by switch, set

the switch by select switch dial function (p.65).

(Mixing function ON/OFF)

Select the setting item "MODE" by the (JOG) button up or

down operation. Use the (+) or (-) and set the function to the

"ON" or "OFF" state.

“INH” : Function OFF

“ON” : Function ON. When the switch is OFF, “OFF” is displayed.

Display "PROG MIX" screen by the following method:

Function ON/OFF (MODE)

INH,ON(OFF)

Setup items

MODE : Function ON/OFF

LEFT :

Mixing rate (Left side)

RGHT :

Mixing rate (Right side)

MST : Master channel

SLV : Slave channel

MXMD : Mix mode

TRIM : Trim mode

Select button

- Select with the (+) or (-) but-

tons.

4PLS-Eng-08-2-Function-P65-83.indd 70 2013/04/07 12:48:12