User's Manual

Page 84 FRH-SD07TU/TB Manual
BIV erence and Set Beacon Intervals Ref
Syntax
BIV(Interval) {; Local Station Address}
Station Address : local station address for 485 mode (000 to 239).
: current set value (reference)
)
of the radio o p.51
MPLE
Interval : Specifies 000 to 065, in 10msec increment.
Local
Response
xxx
P0 : command accepted (setting)
N0 : command error (Except 485 mode
Function
Set the interval beacon transmission/receiving function. Refer t
COMMUNICATION EXA (N:M-MODE 3)
.
The current value can be referred by issuing the command only. In case of setting,
for setting.
ransmission function status (REG19:bit 1=1), the beacon
val can be set. In the beacon receiving function status
h beacon receiving interval can be set.
for temporarily changing the interval. The default values are
fixed at 500 ms for the receiving interval and 150 ms for the transmission interval.
The default value is reloaded at the power on or reset operation.
Example
>@BIV025 CR/LF : Set the receiving (transmission) interval at 250 ms
<P0 CR/LF : command accepted
>@BIV CR/LF : Refer the current value
<025 CR/LF : 025 (25 0ms) returns
Notes
Values set by the BIV command will be lost by turning the power on or resetting.
Generally, this parameter is no need to modifying. Use with the default value.
input the desired value
In the radio beacon t
transmission inter
1), t(REG19:bit 2= e
BIV command is used
Rev. 050415-01.1