User's Manual

Page 93

POF Transmit Directly to Receiver

Syntax

POF

: command accepted

e headerless packet transmission mode (mode 5), transmits directly to

ue,

of REG18.

e transmission path through repeater

CR/LF : command accepted

otes

Response

N0 : command error

Function

In th

receiver without passing through the repeater.

This command is used for temporary change of the path. To change the default val

change bit 5

Example

>@PON CR/LF : sets th

<P0

< @POFCR/LF : sets to direct transmission to receiver modem

<P0 CR/LF : command accepted

This command is not allowed to be used in 485 mode.

Futaba Corporation Rev. 050415-01.1