User's Manual

Page 98 FRH-SD07TU/TB Manual
REN Reception Enable
Syntax
REN{Local Station Address}
Local Station Address : local station address for 485 mode (000 to 254).
this command to enable wireless reception after reception is disabled with the
>@REN CR/LF : enable wireless reception.
<P0 CR/LF : command accepted
Response
P0 : command accepted
N0 : command error (Except 485 mode)
Function
Enables wireless reception in the packet transmission mode.
The status when the modem is powered ON or reset follows bit 7 of REG22.
Use
RDA command.
Example
>@RDA CR/LF : disable wireless reception
<P0 CR/LF : command accepted
Rev. 050415-01.1