User's Manual

Page 104 FRH-SD07TU/TB Manual
RON RF Circuit Block Power Up
Syntax
ROF{Local Station Address}
Local Station Address ocal station address for 485 mode (000 to 254). : l
Res
P0 : command acc
N0 : command error (Except 485 mode)
activates RF operation.
m s power down state set by the
command.
CR/LF : turn on RF circuit block
ponse
epted
Function
Turn on the power of RF circuit block and
Use this co mand to activate RF circuit block after it
ROF
The status when the modem is powered ON or reset, the RF circuit block is in the
operation state.
Example
>@ROF CR/LF : turn off RF circuit block
<P0 CR/LF : command accepted
>@RON
<P0 CR/LF : command accepted
Rev. 050415-01.1