User's Manual

Page 2 FRH-SD07TU/TB Manual
1.1 Spec ial Fe at ure s
The following list highlights some of the special features of the FRH-SD07TU/TB. For more
complete system specifications please refer to p.165 SPECIFICATIONS
.
Approved under FCC Part 15.247 rules (TU version) and under the European ETS 300 440
standard (TB version) -- no special user license required
Operating range greater than 1000 feet, line-of-sight -- configurable as a repeater for
extended range of application service area
Ultra low power consumption. 35mA (Maximum) is achieved at the full-rate operation mode
retaining almost same function and performance in the conventional FRH series radio.
Newly developed doze waiting reception, ULTRA (Ultra Low-power Transient Radio
Access) mode is implemented to the modem. It enables 2mA current consumption
(average) in the mode.
2.4 GHz Direct Sequence Spread Spectrum (DSSS) communication system provides
unsurpassed immunity to interference and RF noise
Diversity receiving function is employed, which is practically invulnerable to multipath
fading
Fast switching Time-Division-Duplex (TDD) provides virtual full-duplex communication
between terminal equipments at rates up to 115.2 kbps
54 user selectable frequencies allow up to 54 independent networks to operate
simultaneously in the same area
Single fixed frequency communication or multi-access communication (automatic selection
of an vacant frequency from a defined group of frequencies) allows the user to select the best
frequency use for the application
Supports 1:1, 1:n, and n:m wireless network topology
Serial communication interface allows direct connection to a micro controller chip. By
converting its level by the external interface circuit, conformable to RS232C, RS422 and
RS485
Small size allows easy integration with many systems (1.97" x 1.18" x 0.31" / 50 x 30 x 8
mm)
Supply voltage range is DC voltage in 2.7 to 3.3 V DC
Communication can be made with other FRH series modems such as 03TU, 04TU and 06TU.
Rev. 050415-01.1