User's Manual

Page 66 FRH-SD07TU/TB Manual
REG tting 1 [default value: 8CH] 18: Communication Se
Bits 7
Bit 1: Source address check
– 2: Reserved
• The FRH-SD07TU/TB does not use this register. Keep the default value as it is.
0
Inhibit source address checking (default value)
1
Activate source address checking
Table 5–4: Source Address Check Settings
•
ta is
ceived).
Bit 0
When the source address checking is active and the source address in the received
packet header does not match the destination address setting (REG02), the da
discarded (data cannot be re
: Destination address check
0
Inhibit destination address checking on receipt (default)
1
Activate destination address checking on receipt
Table 5–5: Destination address check
in the
received packet header does not match the received modem’s local station address
(REG00), the data is discarded (data cannot be received).
• When the destination address checking is active and the destination address
Rev. 050415-01.1