FUTK9280 12K Manual
61
<Functions of System Menu>
● Select the function name
and return to the System
menu by pushing the RTN
button or pushing the
HOME/EXIT button.
<Push Dial>
RETURN
Turns off the buzzer.
The warning sound and other sounds of the
T12K transmitter can be turned off.
*When “WARNING” is set to OFF, the no operation alarm
(30 minutes), mixing warning sound, and low battery alarm
sounds are turned off.
● Select [SOUND] at the system menu and access
the setup screen shown below by pushing the RTN
button.
● Telemetry data is announced over headphones.
There are two pages of settings for it.
On/off operation
1. Move the cursor to the [TIMER][WARNING]
or [OTHER SOUND] item and push the RTN
button to switch to the data input mode.
2. Select ON or OFF by scrolling the Push dial.
*The display blinks.
3.Push the RTN button.
SOUND
SOUND 2/2 VARIO MELODY
This is the volume of Vario Melody only.
Setting range : 0 (silent) ~ 30 (maximum)
The hardware for the adjustment is selectable.
Setting range
:
J1
,
J2
,
J3
,
J4
,
T1
,
T2
,
T3
,
T4
,
SA
,
SB
,
SC
,
SD
,
SE
,
SF
,
SG
,
SH
,
LS
,
LD
,
RD
,
RS
The operation mode of the adjustment
hardware is selectable.
ATL+ : When the operation direction is right or down
or C.W. , the volume is increased.
ATL- : When the operation direction is right or down or
C.W. , the volume is decreased.
SYM. : The center position is minimum volume. Both
end points are maximum volume.
SYM.ATL+ ATL-
This is a hardware
for phone volume
except Vario.
Phone volume
(Telemetry etc,)
Vario melody volume
This is a hardware for phone
volume Vario.
This is a operation mode
for the phone volume
except Vario Melody.
This is a operation mode
for the phone volume
Vario Melody.
Scrolling
● Moving cursor
● Selecting mode
● Adjusting value
● To next page
● To input data mode
● Data is entered