INSTRUCTION MANUAL
INTRODUCTION Thank you for purchasing a Futaba T-FHSS SR 2.4GHz* 4PM digital proportional R/C system. This system is extremely versatile and may be used by beginners and pros alike. In order for you to make the best XVH RI \RXU V\VWHP DQG WR À\ VDIHO\ SOHDVH UHDG WKLV PDQXDO FDUHIXOO\ ,I \RX KDYH DQ\ GLI¿FXOWLHV ZKLOH XVLQJ \RXU V\VWHP SOHDVH FRQVXOW WKH PDQXDO RXU RQOLQH )UHTXHQWO\ $VNHG 4XHVWLRQV RQ WKH ZHE SDJHV UHIHUHQFHG EHORZ \RXU KREE\ GHDOHU 'XH WR XQIRUHVHHQ FKDQJHV LQ SURGXFWLRQ SURFHGX
Compliance Information Statement (for U.S.A.) 7KLV GHYLFH FRPSOLHV ZLWK SDUW RI WKH )&& 5XOHV 2SHUDWLRQ LV VXEMHFW WR WKH IROORZLQJ WZR FRQGLWLRQV 7KLV GHYLFH PD\ QRW FDXVH KDUPIXO LQWHUIHUHQFH DQG 7KLV GHYLFH PXVW DFFHSW DQ\ LQWHUIHUHQFH UHFHLYHG LQFOXGLQJ LQWHUIHUHQFH WKDW PD\ FDXVH XQGHVLUHG RSHUDWLRQ 5) 5DGLDWLRQ ([SRVXUH 6WDWHPHQW )RU 7 30 7KLV HTXLSPHQW FRPSOLHV ZLWK )&& UDGLDWLRQ H[SRVXUH OLPLWV VHW IRUWK IRU DQ XQFRQWUROOHG HQYLURQPHQW 7KLV WUDQVPLWWHU PXVW QRW EH FR ORFDWHG RU RS
Table Of Contents For Your Safety As Well As That Of Others.........................8 Explanation Of Symbols ...............................................................8 2.4GHz System Precautions .........................................................8 Receiver System Precautions ......................................................8 Operation Precautions ..................................................................9 NiMH / NiCd / LiFe Battery Handling Precautions ....................
Function Map .....................................................................37 Operation Of Screen ...................................................................37 Calling The Menu Screen .........................................................37 Selecting Items On The Menu Screen .....................................38 Value Of Each Function And Changing The Set Value ...........38 Basic Menu Japanese Katakana Character Display ................39 Function List .................................
Channel 3/4 "CH3/CH4" ...............................................................67 Channel 3/4 Position Model Selection "MDL SELE" ....................................................68 Model memory call Model Name "MDL NAME" ..........................................................69 Model memory name & User name, set/modify Model Copy "MDL COPY" ...........................................................70 Model memory copy. Model Reset "MDL RES"..................................................
Telemetry "TELEMETRY" ..........................................................115 Connection diagram ...............................................................116 Telemetry Function ON/OFF ..................................................116 Telemetry Sensor Setting .......................................................118 Telemetry information display settings ...................................121 Log Setting, Start/ Stop ..........................................................
For Your Safety As Well As That Of Others 8VH WKLV SURGXFW LQ D VDIH PDQQHU 3OHDVH REVHUYH WKH IROORZLQJ VDIHW\ SUHFDXWLRQV DW DOO times. Explanation Of Symbols )RU VDIHW\¶V VDNH SD\ VSHFLDO DWWHQWLRQ ZKHQHYHU \RX VHH WKH PDUNV VKRZQ KHUH For Your Safety As Well As That Of Others Symbols Explanation Danger Indicates a procedure which could lead to a dangerous situation and may cause death or serious injury if ignored and not performed properly.
Operation Precautions Warning Do not operate outdoors on rainy days, run through puddles of water or use when visibility is limited. Should any type of moisture (water or snow) enter any component of the system, erratic operation and loss of control may occur. Interference could cause loss of control. Improper installation of your Radio Control System in your model could result in serious injury.
NiMH / NiCd / LiFe Battery Handling Precautions 2QO\ ZKHQ 1L0+ 1L&G /L)H EDWWHULHV DUH XVHG Warning Never plug the charger into an outlet of other than the indicated voltage. Plugging the charger into the wrong outlet could result in an explosion or fire. For Your Safety As Well As That Of Others Never insert or remove the charger while your hands are wet. You may get an electric shock. Do not use the T4PM transmitter’s battery as the receiver’s battery.
When the system will not be used for any length of time, store the system with NiMH / NiCd batteries in a discharged state. Be sure to recharge the batteries prior to the next time the system is used. When a LiFe battery pack will not be used for a long time, to prevent it from deteriorating we recommend that it be kept in about the half capacity state instead of fully charged. Also be careful that the battery does not enter the over-discharged state due to self-discharge.
Before Using Features -T-FHSS SR (Super response) & telemetry T-FHSS ,Q DGGLWLRQ WR WKH 7 )+66 WHOHPHWU\ V\VWHP ZH DGGHG D 7 )+66 65 6XSHU UHVSRQVH V\VWHP WKDW LQFUHDVHG SURFHVVLQJ VSHHG WR IXUWKHU LPSURYH UHVSRQVH 65 V\VWHP GRHV QRW VXSSRUW WHOHPHWU\ IXQFWLRQ *5 6% DQG 5 6% ( DUH QRW FRPSDWLEOH ZLWK 65 V\VWHP -T-FHSS MINIZ system Before Using %\ VHWWLQJ WR WKH 0,1,= V\VWHP LQ WKH UHFHLYHU VHWWLQJ PHQX \RX FDQ XVH .\RVKR 0LQL = (YR GHGLFDWHG UHFHLYHU 5$ 'HGLFDWHG UHFHLYHU 5$ UHTXLUH
-4WS mixing for crawlers and other 4WS type (4WS) 7KLV IXQFWLRQ FDQ EH XVHG ZLWK FUDZOHUV DQG RWKHU :6 W\SH YHKLFOHV -Dual ESCs mixing for crawlers cars (DUAL ESC) ESCs at the front and rear are controlled independently. -CPS-1 mixing (CPS MIX) /(' OLJKWLQJ DQG ÀDVKLQJ FRQWURO XVLQJ RXU &36 FKDQQHO SRZHU VZLWFK FDQ EH PDWFKHG WR VWHHULQJ DQG WKURWWOH RSHUDWLRQ E\ VZLWFK RQO\ -Anti-skid braking system (TH A.B.
Set Contents $IWHU RSHQLQJ WKH ER[ ¿UVW FKHFN LI WKH FRQWHQWV FRQIRUP WR WKH IROORZLQJ 7KH FRQWHQWV GHSHQG RQ WKH VHW DV VKRZQ EHORZ Transmitter T4PM Receiver R304SB / R304SB-E / R314SB / R314SB-E R334SBS / R334SBS-E Dry battery holder *Installed in transmitter. Before Using Miscellaneous Mini screwdriver * It is used for receiver. 1.5mm hex wrench / 2.0mm hex wrench Instruction manual ,I DQ\ RI WKH VHW FRQWHQWV DUH PLVVLQJ RU \RX KDYH DQ\ TXHVWLRQV SOHDVH FRQWDFW \RXU dealer.
Transmitter T4PM Nomenclature LCD screen Digital Trim 2 (DT2) (default throttle trim) Power switch Digital Trim1 (DT1) (default steering trim) Digital Dial (DL) (default OFF) LED Edit buttons Push switch (SW2) (default OFF) Push switch (SW1) (default OFF) Before Using Steering wheel Grip Handle Wheel tension adjusting screw Digital Trim 3 (DT3) (default CH3) Digital Trim 4 (DT4) (default dual rate) Trigger slide adjusting screw Trigger tension adjusting screw Mechanical ATL adjusting screw Di
Battery Replacement Method (3 AA Size Batteries) Caution Never try to recharge a dry cell battery. The transmitter may be damaged or the battery electrolyte may leak or the battery may break. Insert the batteries in the correct polarity. If the polarity is incorrect, the transmitter may be damaged. When the transmitter is not in use, remove the batteries. If the battery electrolyte leaks, wipe off the case and contacts. Do not use commercial AA size NiCd and NiMH batteries.
When Using The Optional Battery :KHQ XVLQJ DQ RSWLRQDO UHFKDUJHDEOH EDWWHU\ UHSODFH WKH EDWWHU\ DV GHVFULEHG EHORZ $OZD\V XVH WKH RSWLRQDO )7 ) % )7 ) %9 RU )7 ) %9 UHFKDUJHDEOH EDWWHU\ %H VXUH WR DWWDFK WKH LQFOXGHG EDWWHU\ VSDFHU WR WKH EDWWHU\ $IWHU UHPRYLQJ WKH GU\ FHOO EDWWHU\ ER[ IURP WKH WUDQVPLWWHU GLVFRQQHFW WKH FRQ nector. Insert the connector of the optional EDWWHU\ DQG ORDG WKH QHZ EDWWHU\ LQWR WKH transmitter.
With Balance Charger (Example: When using the )7 ) % %9 %9 with an optional charger) Balance charging connector for LiFe battery charger. 1 Remove the battery cover. 2 Disconnect the battery from the T4PM. 3 Balance charging cannot be done through the transmitter. You must remove the LiFe battery to do this charge. )ROORZ WKH GLUHFWLRQV RI WKH RSWLRQDO /L)H FKDUJHUV LQ XVH LiFe battery is removed from the transmitter.
Power Switch & Key Operation POWER Press and hold ON/OFF LCD Screen Contrast (-) Setup Value DOWN (JOG) Move the page and the cursor on the screen by operating JOG up, down, left and right. When you press with each selected function, the setting screen of the function is displayed. (+) Before Using The LCD screen contrast can be adjusted. (For more information, see page 42.) Setup Value UP (END) Return to the value by pressing the (+) and (-) keys simultaneously for about 1 second.
Power Off Reminder Alarm & Auto Power Off :KHQ WKH VWHHULQJ ZKHHO WKURWWOH WULJJHU SXVK VZLWFK RU HGLW EXWWRQ DUH QRW RSHUDWHG IRU PLQXWHV GHIDXOW DQ DODUP VRXQGV DQG "127 23(5$7(' )25 $ /21* 7,0(" LV GLVSOD\HG RQ WKH /&' VFUHHQ :KHQ WKH VWHHULQJ ZKHHO WKURWWOH WULJJHU SXVK VZLWFK RU HGLW EXWWRQ DUH RSHUDWHG WKH DODUP LV UHVHW ,I WKH DODUP LV QRW UHVHW WKH DXWR SRZHU RII IXQFWLRQ ZLOO DXWRPDWLFDOO\ WXUQ RII WKH SRZHU DIWHU PLQXWHV ,I WKH V\VWHP LV QRW WR EH XVHG WXUQ RII W
Digital Trim Operation (Initial settings: DT1: Steering trim, DT2: Throttle trim, DT3: Channel 3, DT4: Steering D/R, DT5: ATL-Brake rate) 2SHUDWLQJ E\ WKH WULP 3XVK WKH WULP OHYHU WR WKH OHIW RU ULJKW XS RU GRZQ 7KH FXUUHQW SRVLWLRQ LV GLVSOD\HG RQ WKH /&' VFUHHQ DT1 DT4 DT3 DT5 • Each step is indicated by a tone. • When the trim exceeds the maximum trim adjustment range, the beep will change and the servo will not move any farther.
Wheel & Trigger Tension Adjustment 0DNH WKLV DGMXVWPHQW ZKHQ \RX ZDQW WR FKDQJH WKH ZKHHO RU WULJJHU VSULQJ¶V WHQVLRQ Adjustment 1 Using a 1.5mm hex wrench, adjust the spring tension of the wheel or throttle by turning the screw shown in the figure. The wheel side is inside the adjustment hole. Before Using • The spring is set to the weakest tension at the factory. • When the adjusting screw is turned clockwise, the spring tension increases.
About Transmitter Antenna and Receiver About The Transmitter Antenna Before Using Antenna Warning Please do not grasp the transmitter's antenna while driving. Doing so may degrade the quality of the RF transmission to the model. *A small glitch may occur if the transmitter antenna is brought close to servos, ESCs or other peripheral devices. This is not a serious issue, but keep it in mind (especially during setup). Receiver Terminology Antenna Coaxial cable *R314SB-E has no external antenna.
Receiver Installation ,QVWDOO WKH UHFHLYHU RQ WKH FDU DV IROORZV NOTE: The R304SB, R334SBS and R334SBS-E receiver are operating range may reduced, depending on where the receiver and the antenna are mounted. NOTE: The R304SB, R334SBS and R334SBS-E receiver are put the antenna in the antenna tube to protect it. Do not let the tip go outside. NOTE: The R334SBS and R334SBS-E receiver of diversity type with both external and internal antennas. Do not place wiring or other objects on the plate.
Installation Receiver and Servo Connections &RQQHFW WKH UHFHLYHU DQG VHUYRV DV VKRZQ EHORZ &RQQHFW DQG LQVWDOO WKH UHFHLYHU DQG VHUYRV LQ DFFRUGDQFH ZLWK "Installation Safety Precautions" on the next page. 7KH ¿JXUH VKRZQ EHORZ LV DQ H[DPSOH 7KH PHWKRG RI FRQQHFWLQJ WKH PRWRU FRQWUROOHU to the motor and battery depends on the motor controller used. Purchase the motor controller and servos separately. The receiver also depends on the set.
Connection example of S. BUS using a telemetry sensor ESC Switch $ % & CH2 Telemetry sensors (Option) Receiver CH1 Temperature sensor S.BUS2 RPM sensor S.BUS2 Each telemetry sensor is connected to the S.BUS 2 port collectively with a hub or double extention cable. Voltage sensor Installation Note: In SR mode, the S.BUS 2 port cannot be used other than battery input. The telemetry system can only be used with TFHSS.
Warning Receiver Vibration-proofing / Waterproofing (Car) Vibration-proof the receiver by wrapping it in foam rubber or other vibration-absorbing material and mount it with thick double-sided tape. When using the receiver holder supplied with the model kit, mount the holder to the chassis through a rubber grommet. (Boat) Vibration-proof the receiver by wrapping it in foam rubber or other vibration-absorbing material. Also waterproof the receiver by cruising it in a plastic bag.
Warning Servo Throw Operate each servo over its full stroke and be sure the linkage does not bind or come loose. The continuous application of unreasonable force to a servo may cause damage and excessive battery drain. Caution! A whining noise indicates that the steering servo is improperly set. Decide the EPA value at the contact point. Installation $GMXVW WKH VWHHULQJ VHUYR VR WKDW XQUHDVRQable force is not applied to the servo by the chassis at maximum servo travel.
Initial Set-Up Preparations (Transmitter) %HIRUH VHWWLQJ WKH 7UDQVPLWWHU IXQFWLRQV FKHFN DQG VHW WKHVH LWHPV QH[W (Display when power switch turned on) :KHQ WKH SRZHU VZLWFK LV WXUQHG RQ WKH FXUUHQWO\ VHOHFWHG PRGHO QXPEHU LV GLVSOD\HG &KHFN LI WKLV QXPEHU LV WKH PRGHO QXPEHU \RX ZDQW WR VHW XS 7R FKDQJH WKH PRGHO QXPEHU XVH WKH 0RGHO 6HOHFW IXQFWLRQ SDJH Turn on the transmitter power. The model number is displayed.
,I WKH UHFHLYHU XVHG DQG WKH 5HFHLYHU V\VWHP VHWWLQJV DUH GLIIHUHQW FKDQJH WKH 5HFHLYHU system using the "5(&(,9(5" IXQFWLRQ :KLFK 5HFHLYHU V\VWHP LV VHW FDQ EH FKHFNHG DW WKH +20( VFUHHQ T-FHSS SR system T-FHSS system High speed T-FHSS system Normal speed S-FHSS system Normal speed S-FHSS system High speed MINIZ system Receiver System Change & How To Link Initial Set-Up 7KH ¿ UVW RSHUDWLRQ GHVFULEHG EHORZ VHWV WKH 5HFHLYHU V\V WHP 1H[W WKH WUDQVPLWWHU DQG UHFHLYHU DUH OLQNHG DQG WKH trans
*When using an S-FHSS system ("SFH") receiver (R2104GF, R204GF-E, etc.), after reaching this point set the transmitter power switch to OFF and go to "Receivers other than TFHSS" on page 31. 3 Bring the transmitter and receiver to 20 inches (half meter) of each other (do not allow the antennae to touch) and turn on the receiver power. 4 Press the T4PM transmitter’s (JOG) button up or down to move the cursor to "LINK: EXE".
The telemetry ON/OFF and communication status can be checked at the HOME screen. The reception strength High Low No signal reception Receiver -> Transmitter: The reception strength is shown. - Telemetry function :ON - Receiver ID setting complete - Data receiving sensitivity display shows that data cannot be received because it is outside the data receiving range or because of the effects of an obstruction or the receiver power is OFF after receiver ID check.
Kyosho Mini-Z EVO dedicated receiver RA-42 1 Bring the transmitter and the receiver close to each other, within 20 inches (half meter). Turn on the receiver. 2 Turn on the transmitter. 3 Turn on the Mini-Z receiver RA-42. 4 Press the T4PM transmitter’s (JOG) button up or down to move the cursor to "LINK: EXE". When the (JOG) button is pressed for approximately 1 second, "PUSH RX LINK SW" appears on the screen and a 20 second countdown begins.
How to set the SR mode Channel ,Q WKH FDVH RI 7 )+66 65 "SR mode" ZKLFK KDV JUHDWO\ LPSURYHG UHVSRQVH FRPSDUHG WR WKH FRQYHQWLRQDO 7 )+66 FDQ EH XVHG 7KH GLVSOD\ FKDQJHV ZKHQ \RX FKDQJH LW %H VXUH WR WXUQ RII WKH SRZHU RI WKH UHFHLYHU EHIRUH RSHUDWLRQ FKHFN ,Q 65 PRGH 21 2)) FDQ EH VHW IRU HDFK FKDQQHO :KHQ XVLQJ QRUPDO VHUYR RU (6& VHW WKH 65 PRGH RI WKH FRQQHFWHG FKDQQHO WR 2)) Note: In SR mode ON, normal servo, ESC and gyro will not operate. Please set our S.
Throttle Mode Check 7KH WKURWWOH VHUYR WUDYHO FDQ EH VHW WR RU IRU WKURWWOH WULJJHU RSHUDWLRQ DV UHTXLUHG E\ WKH WKURWWOH PRGH IXQFWLRQ SDJH F5/B5 Forward side 5:5 F7/B3 Brake side Forward side 7:3 Brake side ) % RU ) % - Steering trim (DT1) check 2Q WKH LQLWLDO VHW XS VWHHULQJ WULP LV DVVLJQHG WR WKH '7 WULP OHYHU XSSHU VLGH RI WKH VWHHULQJ ZKHHO 2SHUDWH WKH '7 DQG PDNH VXUH WKH PDUNHU PRYHV RQ WKH 67 JUDSK ,I GHIDXOW KDV EHHQ FKDQJHG WHVW VWHHULQJ WULP LQ
- Steering dual rate (DT4) check $W LQLWLDO VHW XS VWHHULQJ GXDO UDWH ' 5 LV DVVLJQHG WR WKH '7 WULP OHYHU DW WKH JULS RI WKH WUDQVPLWWHU 2SHUDWH WKH '7 DQG FKHFN LI WKH ' 5 YDOXH GLVSOD\HG RQ WKH VFUHHQ FKDQJHV $IWHU FKHFNLQJ ' 5 VHW WKH VWHHULQJ GXDO UDWH WR - Throttle ATL (DT5) check $W LQLWLDO VHW XS WKURWWOH $7/ $7/ LV DVVLJQHG WR WKH '7 WULP OHYHU EHORZ WKH '7 2SHUDWH WKH '7 DQG FKHFN LI WKH $7/ YDOXH GLVSOD\HG RQ WKH VFUHHQ FKDQJHV $IWHU FKHFNLQJ $7/ VHW WK
Function Map Operation Of Screen ,Q WKLV LQVWUXFWLRQ PDQXDO (GLW %XWWRQV DUH UHSUHVHQWHG E\ WKH V\PEROV VKRZQ EHORZ 7KH -2* EXWWRQ FDQ EH RSHUDWHG LQ GLUHFWLRQV XS GRZQ OHIW DQG ULJKW (-) button (+) button (JOG) button left (JOG) button right (JOG) button up (JOG) button down (END) button (JOG) button (JOG) button up, down, left or right (-) button is press (+) button is press (END) button is press (JOG) button is press Calling The Menu Screen Function Map 5HIHU WR WKH PDS EHORZ IRU WK
Selecting Items On The Menu Screen The item indicated by the reverse displayed cursor on the screen is selected. 7KH FXUVRU LV PRYHG E\ -2* EXWWRQ LQ XS RU GRZQ PRYHPHQWV 7KH FXUVRU PRYHPHQW ¿ JXUH VKRZQ EHORZ LV DQ H[DPSOH RI WKH 0(18 VFUHHQ +RZHYHU PRYHPHQW RI WKH cursor is the same in all of the screens. )RU LQVWDQFH LI WKH -2* EXWWRQ LV SUHVVHG ZKHQ WKH FXUVRU LV DW WKH HQG SRLQW (1' 32,17 RQ WKH 0(18 VFUHHQ WKH HQG SRLQW (1' 32,17 IXQFWLRQ VHWWLQJ VFUHHQ appears.
Basic Menu Japanese Katakana Character Display 2Q WKH V\VWHP PHQX WKH EDVLF PHQX VFUHHQ VKRZQ EHORZ FDQ EH GLVSOD\HG LQ -DSDQHVH katakana characters. (MENU 1 screen) (MENU 2 screen) (MENU 3 screen) (MENU 4 screen) ENG (katakna) Function Map Changing the character Press (MENU 4 screen) (HOME screen) Call the MENU 3 screen from the HOME screen by the (JOG) button up, down, left or right operation and press the (+) button.
Function List Function List Function Abbreviation Page 5HFHLYHU V\VWHP VHOHFWLRQ OLQNLQJ ZLWK UHFHLYHU DQG 65 PRGH &KDQQHO VHWWLQJ 29 /&' FRQWUDVW EDFNOLJKW %DWWHU\ W\SH EX]]HU SRZHU RII UHPLQGHU DODUP %DVLF PHQX FKDUDFWHU GLVSOD\ +20( VFUHHQ GLVSOD\ PRGH VHWWLQJ 41 REVERSE Servo operation reversing. 45 SUBTRIM 6HUYR FHQWHU SRVLWLRQ ¿QH DGMXVWPHQW 46 (QG SRLQW DGMXVWPHQW 47 6WHHULQJ FXUYH DGMXVWPHQW 7KURWWOH FXUYH DGMXVWPHQW 50 6WHHULQJ VHUYR GHOD\ 7KURWWOH VHUYR GHOD\ 53 R
Function System Functions "SYSTEM" 7KH JUDSKLF OLTXLG FU\VWDO VFUHHQ GLVSOD\ PRGH EX]]HU VRXQG DQG PHQX FKDUDFWHU PRGH HWF FDQ EH VHW - "CONTRA"---Liquid crystal screen contrast adjustment (20 steps) - "BK-LHT"---Liquid crystal screen backlighting display mode setup (OFF, ON at button operation, normally ON) - "LHT-TM"---Setting of ON time (1~30 secs) when [ON at button operation] was selected above.
System function setup 1 (Setting of each item) (Adjusting the liquid crystal contrast) Select the setting item "CONTRA" by moving the (JOG) button up or down, and use the (+) and (-) buttons to adjust the screen contrast. $GMXVW WR DQ HDV\ WR VHH FRQWUDVW Adjustment buttons - Use the (+) and (-) buttons to make adjustments. - Press the (+) and (-) buttons simultaneously (approx. 1 sec) to return to the initial value.
(Setting the battery type) Select the setting item "BATT" by moving the (JOG) button up or down, and select the mode by pressing the (+) or (-) button. Note: ,I WKH EDWWHU\ W\SH LV FKDQJHG WR WKH ZURQJ VHWWLQJ WKH ORZ EDWWHU\ DODUP ZLOO EH JHQHUDWHG LPPHGLDWHO\ DIWHU WKH FKDQJH DQG RSHUDWLRQ ZLOO EHFRPH LPSRVVLEOH ,I WKH ORZ EDWWHU\ DODUP LV JHQHUDWHG SOHDVH UHWXUQ WKH VHWWLQJ WR MXVW EHIRUH RU WXUQ RII WKH SRZHU DQG UHSODFH WKH EDWWHU\ ZLWK D IXOO\ FKDUJHG EDWWHU\ RU D QHZ GU
(Changing the power off reminder alarm setting) Select the setting item "OPE-TM" by moving the (JOG) button up or down, and use the (+) and (-) buttons to select the power off forgotten alarm mode. The power off forgotten alarm (OPE-TM) 10m, OFF " P" ,I DQ RSHUDWLRQ LV QRW SHUIRUPHG ZLWKLQ PLQXWHV ZKLOH WKH SRZHU LV RQ DQ DXGLEOH DODUP VRXQGV "2))" 3RZHU RII IRUJRWWHQ DODUP VHWWLQJ 2)) When finished with the setting, return to the MENU screen by pressing the (END) button.
Servo Reverse "REVERSE" (All channel) This function reverses the direction of operation of the servos related to transmitter VWHHULQJ WKURWWOH DQG FKDQQHOV RSHUDWLRQ +RZHYHU ZKHQ WKH SRVLWLRQ VHW E\ WULP RU VXEWULP VKLIWV IURP WKH FHQWHU WKH FHQWHU EHFRPHV WKH RSSRVLWH VLGH Display to "5(9(56(" VFUHHQ XVLQJ WKH IROORZLQJ PHWKRG (MENU 1 ) (HOME screen) (REVERSE screen) MENU-2 MENU-3 Select "REVERSE" MENU-4 Servo reverse function setting (Preparation) - Select the channel to be
Subtrim "SUBTRIM" (All channel) 8VH WKLV IXQFWLRQ WR DGMXVW WKH QHXWUDO SRVLWLRQ RI WKH VWHHULQJ WKURWWOH FKDQQHO DQG channel 4 servos. 90° *Subtrim adjusts the entire range of the servo in the set direction.
End Point Adjuster "END POINT" (All channel) 8VH WKLV ZKHQ SHUIRUPLQJ OHIW DQG ULJKW HQG SRLQW DGMXVWPHQWV WKURWWOH KLJK VLGH EUDNH VLGH RSHUDWLRQ DPRXQW DGMXVWPHQW RU FKDQQHO DQG FKDQQHO VHUYR XS VLGH GRZQ VLGH RSHUDWLRQ DPRXQW DGMXVWPHQW GXULQJ OLQNDJH &RUUHFW WKH PD[LPXP VWHHULQJ DQJOH IRU OHIW DQG ULJKW VWHHULQJ DQJOHV ZKHQ WKHUH LV D difference in the turning radius due to the characteristics of the vehicle.
Display to "(1' 32,17" VFUHHQ XVLQJ WKH IROORZLQJ PHWKRG (END POINT screen) (MENU 1 ) (HOME screen) MENU-2 MENU-3 Select "END POINT" MENU-4 Setting item selection (Steering and Throttle direction) - The direction (STR LFT and STR RGT) linked with the steering wheel is switched. - The direction (THR FWD and THR BRK) linked with the throttle trigger is switched.
Throttle (END POINT) adjustment (Preparation) - Before setting the throttle end point adjustment (END POINT), set the throttle ATL trim (initial setup: DT5) to the maximum throttle angle position 100%. 100 - Select the setting item "FWD" by moving up or down on the (JOG) button and make the following adjustments: Or move the throttle trigger fore or aft to select FWD or REV.
Exponential Adjustment "EXP" (Steering/ Throttle system) This function is used to change the sensitivity of the servo around the neutral position.
FWD (Throttle Forward Side EXP) / BRK (Throttle Brake Side EXP) 7KLV IXQFWLRQ PDNHV WKH WKURWWOH IRUZDUG VLGH DQG EUDNH VLGH GLUHFWLRQ VHUYR RSHUDWLRQ TXLFNHU RU PLOGHU ,W KDV QR HIIHFW RQ WKH VHUYR PD[LPXP RSHUDWLRQ DPRXQW Advice :KHQ WKH FRXUVH FRQGLWLRQV DUH JRRG DQG WKH VXUIDFH KDV JRRG JULS VHW HDFK FXUYH WR WKH VLGH TXLFN VLGH :KHQ WKH URDG VXUIDFH LV VOLSSHU\ DQG WKH GULYH ZKHHOV GR QRW JULS LW VHW HDFK FXUYH WR WKH PLQXV PLOG VLGH Throttle forward side EXP adjustment (Preparation
Throttle brake side EXP adjustment (Preparation) - On the EXP screen make the following adjustments: 1 Select the setting item "BRK" by moving the (JOG) button up or d o w n . Use the (+) button to adjust for a faster brake response or use the (-) button for a slower or milder brake response. Adjustment range -100 ~ 0 ~ +100% Adjustment buttons - Use the (+) and (-) buttons to make adjustments. - Return to the initial value by pressing the (+) and (-) buttons simultaneously (approx. 1 sec).
Servo Speed "SPEED" (Steering system) 7KLV IXQFWLRQ OLPLWV WKH PD[LPXP VSHHG RI WKH VWHHULQJ VHUYR 'HOD\ IXQFWLRQ Display to "SPEED" VFUHHQ XVLQJ WKH IROORZLQJ PHWKRG (SPEED screen) (MENU 1 ) (HOME screen) MENU-2 MENU-3 Select "SPEED" MENU-4 Setting item STR TURN: Steering turn side STR RETN: Steering return side THR TURN: Throttle turn side STR (Steering Speed) 4XLFN VWHHULQJ RSHUDWLRQ ZLOO FDXVH PRPHQWDU\ XQGHUVWHHULQJ ORVV RI VSHHG RU VSLQ ning. This function is effective in such cases.
Steering Speed adjustment (Preparation) - On the SPEED screen make the following adjustments: 1 "TURN" direction adjustment On the SPEED screen, select the setting item STR "TURN" by moving the (JOG) button up or down. Use the (+) or (-) buttons to adjust the delay amount. R TU N T UR Adjustment range 1~100% (each direction) At 100%, there is no delay. 1% 100% Servo operation is delayed. N Adjustment buttons - Use the (+) and (-) buttons to make adjustments.
THR (Throttle Speed) Sudden throttle trigger operation on a slippery URDG FDXVHV WKH ZKHHOV WR VSLQ DQG WKH YHKLFOH cannot accelerate smoothly. Setting the throttle VSHHG IXQFWLRQ UHGXFHV ZDVWHIXO EDWWHU\ FRQ VXPSWLRQ ZKLOH DW WKH VDPH WLPH SHUPLWWLQJ VPRRWK HQMR\DEOH RSHUDWLRQ With "SPEED": Quick start without skidding Without "SPEED": Slow start due to skidding Operation 7KURWWOH VHUYR (6& RSHUDWLRQ LV GHOD\HG VR WKDW WKH GULYH ZKHHOV ZLOO QRW VSLQ HYHQ LI WKH
Throttle Acceleration "TH ACC" (Throttle system) 7KH VHUYR ZLOO MXPS WR WKH LQSXW SRVLWLRQ DW LWV PD[LPXP SRVVLEOH VSHHG 8QOLNH H[SR QHQWLDO ZKLFK DGMXVWV WKH ZKROH WKURWWOH PRYHPHQW LQWR D FXUYH WKURWWOH DFFHOHUDWLRQ simply "MXPSV" DZD\ IURP QHXWUDO DQG WKHQ OHDYHV WKH UHPDLQLQJ UHVSRQVH OLQHDU Operation 100% 2SHUDWLRQ QHDU WKH WKURW tle trigger neutral position becomes a sharp rise. Servo travel 100% 50% 7KH IRUZDUG DQG EUDNH sides can be set separately.
Throttle acceleration adjustment (Preparation) - On the TH ACCEL screen make the following adjustments: 1 (Forward acceleration amount adjustment) Select the setting item FWD "RATE" by moving the (JOG) button up or down. Use the (+) and (-) buttons to adjust the acceleration amount. Forward acceleration amount (FWD) 0~100 Initial value: 0 Adjustment buttons - Use the (+) and (-) buttons to make adjustments. - Return to the initial value by pressing the (+) and (-) buttons simultaneously (approx. 1 sec).
A.B.S. Function "TH A.B.S" (Throttle system) :KHQ WKH EUDNHV DUH DSSOLHG ZKLOH FRUQHULQJ ZLWK D :KHHO 'ULYH RU RWKHU W\SHV RI YHKLFOH XQGHUVWHHU PD\ RFFXU 8QGHUVWHHU can be eliminated and corners can be smoothly cleared by using this function. Operation :KHQ WKH EUDNHV DUH DSSOLHG WKH WKURWWOH VHUYR ZLOO SXOVH LQWHUPLWWHQWO\ 7KLV ZLOO KDYH WKH VDPH HIIHFW DV SXPSLQJ the brakes in a full size car. 7KH EUDNH UHWXUQ DPRXQW GHOD\ DPRXQW SXOVH F\FOH DQG EUDNH GXW\ FDQ EH DG
- DELY : Delay 6HWV WKH GHOD\ IURP EUDNH RSHUDWLRQ WR $%6 RSHUDWLRQ :KHQ VHW WR WKH $%6 IXQFWLRQ LV DFWLYDWHG ZLWKRXW DQ\ GHOD\ $W WKH $%6 IXQFWLRQ LV DFWLYDWHG DIWHU D GHOD\ RI DSSUR[LPDWHO\ VHFRQG DQG DW WKH $%6 IXQFWLRQ LV DFWLYDWHG DIWHU D delay of approximately 2 seconds. - CYCL : Cycle speed 6HWV WKH SXOVH VSHHG F\FOH 7KH VPDOOHU WKH VHW YDOXH WKH IDVWHU WKH SXOVH F\FOH - TG.
4 (Cycle speed adjustment) CYCL Servo travel Select setting item "CYCL" by moving the (JOG) button up or down. Use the (+) or (-) button to adjust the pulse speed (cycle). CYCL (Cycle) 7KH VPDOOHU WKH VHW YDOXH WKH IDVWHU WKH SXOVH VSHHG 5 (Trigger point setup) Servo travel Select setting item "TG.P" by moving the (JOG) button up or down. Use the (+) or (-) button to adjust the operating point. TG.P TG.
Fail Safe Unit :KHQ WKH 7 39 LV XVHG ZLWK WKH )XWDED IDLO VDIH XQLW )68 LW ZLOO RSHUDWH DV GHVFULEHG EHORZ +RZHYHU )68 FDQQRW EH XVHG LQ WKH KLJK VSHHG PRGH :KHQ WKH )68 LV FRQQHFWHG WR WKH WKURWWOH FKDQQHO DQG WKH $ % 6 IXQFWLRQ KDV EHHQ DFWLYDWHG WKH )68 /(' ZLOO ÀDVK HDFK WLPH WKH VHUYR RSHUDWHV 7KH UHDVRQ IRU WKLV LV WKDW WKH )68 UHVSRQGV WR VXGGHQ GDWD FKDQJHV FDXVHG E\ $ % 6 IXQFWLRQ pumping operation. It does not mean that the fail safe function is activated.
Throttle Mode "TH MODE" (Throttle system) 7KLV PHQX KDV WKH IROORZLQJ IXQFWLRQV 6HUYR QHXWUDO PRGH ZKLFK VHWV WKH WKURWWOH QHXWUDO UDWLR WR RU *5HIHU WR FRXQWU\ GLVWULEXWRU :(% IRU GHWDLOHG WKH IROORZLQJ IXQFWLRQ H[SODQDWLRQ ,GOH XS ZKLFK UDLVHV WKH LGOLQJ VSHHG ZKHQ VWDUWLQJ WKH HQJLQH WR LPSURYH HQJLQH VWDUWLQJ SHU IRUPDQFH RI D JDVROLQH FDU ERDW 1HXWUDO EUDNH ZKLFK DSSOLHV WKH EUDNHV DW WKH QHXWUDO SRVLWLRQ RI WKH WKURWWOH WULJJHU 7KURWWOH RII HQJLQH FXW ZKLFK VWRS
Idle-Up "IDLUP" 7KLV LV D IXQFWLRQ VHOHFW VZLWFK IXQFWLRQ 7KH LGOH XS VZLWFK PXVW EH VHW VHH SDJH This function is used to improve engine starting performance by raising the idling VSHHG ZKHQ VWDUWLQJ WKH HQJLQH RI D *3 FDU ERDW ,W LV DOVR HIIHFWLYH ZKHQ \RX ZDQW WR SUHYHQW WKH EUDNLQJ ZKHQ WKH SRZHU LV WXUQHG RII GXULQJ UXQQLQJ GXH WR WKH HIIHFW RI \RXU JHDU UDWLR VHWWLQJ DQG FKRLFH RI PRWRU ZKHQ RSHUDWLQJ DQ HOHFWURQLF FDU +RZHYHU FRQVLGHULQJ VDIHW\ DQG WR SUHYHQW WKH PRWRU IURP URWDWLQJ
Neutral Brake "NTBRK" 7KLV LV D IXQFWLRQ VHOHFW VZLWFK IXQFWLRQ 7KH QHXWUDO EUDNH IXQFWLRQ 21 2)) VZLWFK PXVW EH VHW VHH SDJH 7KH QHXWUDO EUDNH ZKLFK DSSOLHV WKH EUDNHV DW WKH QHXWUDO SRVLWLRQ RI WKH WKURWWOH WULJ JHU FDQ EH VHW +RZHYHU ZKHQ XVLQJ WKH 0& &5 0& & 0& & 0& &5 RU RWKHU )XWDED (6& FRQ¿ UP WKDW WKH (6& LV LQ WKH QHXWUDO SRVLWLRQ DQG WKH VHW LV LQ WKH RSHUDWLRQ PRGH EHIRUH VHWWLQJ WKH QHXWUDO EUDNH IXQFWLRQ VZLWFK WR 21 WKH VDPH DV WKH LGOH XS IXQFWLRQ SD
Throttle Off (engine cut) "THOFF" 7KLV LV D IXQFWLRQ VHOHFW VZLWFK IXQFWLRQ 7KH WKURWWOH RII IXQFWLRQ 21 2)) VZLWFK PXVW EH VHW VHH SDJH 7KH HQJLQH FXW IXQFWLRQ VWRSV WKH HQJLQH RI D ERDW HWF E\ RSHUDWLQJ WKH WKURWWOH VHUYR WR WKH VORZ VLGH E\ VZLWFK UHJDUGOHVV RI WKH SRVLWLRQ RI WKH WKURWWOH WULJJHU DQG WKH VHW WLQJ RI RWKHU IXQFWLRQV UHYHUVH IXQFWLRQ VHWWLQJ LV HIIHFWLYH Dial / Trim Setting The function select dial function can control the throttle-off position can be conWUROOHG ZLWK GLJLW
Steering Dual Rate/ Throttle ATL "D/R ATL" ' 5 6WHHULQJ GXDO UDWH 7KH VWHHULQJ OHIW DQG ULJKW VHUYR WUDYHOV DUH DGMXVWHG VLPXOWDQHRXVO\ 7KLV VHWWLQJ LV OLQNHG WR WUDQVPLWWHU JULS WULP OHYHU '7 :KHQ '7 LV DVVLJQHG DQRWKHU IXQFWLRQ GXDO UDWH FDQ EH DGMXVWHG ZLWK WKLV VFUHHQ $7/ 7KURWWOH $7/ 7KLV IXQFWLRQ GHFUHDVHV WKH VHW YDOXH ZKHQ WKH EUDNLQJ HIIHFW LV VWURQJ DQG LQFUHDVHV WKH VHW YDOXH ZKHQ WKH EUDNLQJ HIIHFW LV ZHDN 7KLV IXQFWLRQ LV OLQNHG WR WUDQVPLWWHU JULS WULP OH
Channel 3/4 "CH3/CH4" (3/4 channel) 7KH FKDQQHO VHUYR SRVLWLRQ FDQ EH VHW IURP WKH WKLV VFUHHQ :KHQ &+ LV DVVLJQHG WR D WULP GLDO RU VZLWFK E\ WKH WULP GLDO IXQFWLRQ SDJH RU WKH VZLWFK IXQFWLRQ SDJH WKLV VHWWLQJ LV OLQNHG WR WKDW :KHQ &+ LV QRW DVVLJQHG WR D WULP GLDO RU VZLWFK LW FDQ EH VHW ZLWK WKLV VFUHHQ :KHQ &+ LV DVVLJQHG WR D VZLWFK E\ WKH VZLWFK IXQFWLRQ \RX FDQQRW DGMXVW WKH CH3/4 via the screen.
Model Selsct "MDL SELE" )RUW\ PRGHO GDWD GDWD IRU 5 & FDUV FDQ EH VDYHG LQ WKH 7 30 WUDQVPLWWHU 7KLV PHQX VHOHFWV WKH PRGHO DQG FRSLHV GDWD EHWZHHQ PRGHOV Display "0'/ 6(/(" VFUHHQ XVLQJ WKH IROORZLQJ PHWKRG (MENU 2 ) (HOME screen) (MDL SELE screen) MENU-1 MENU-3 Select "MDL SELE" MENU-4 Using the model select function 1 (Model #. selection) Select the model number by moving the (JOG) button up/down or left/right. "01" ~ "40" are displayed. Model #.
Model Name "MDL NAME" 7KLV IXQFWLRQ DOORZV \RX WR DVVLJQ D WHQ FKDUDFWHU QDPH WR HDFK PRGHO PHPRU\ DQG XV er name. Display "0'/ 1$0(" VFUHHQ XVLQJ WKH IROORZLQJ PHWKRG (MENU 2 ) (HOME screen) (MDL NAME screen) MENU-1 Model name User name MENU-3 Select "MDL NAME" MENU-4 Setting the model name and user name 1 (Move the cursor to the character you want to change.) Select the model name or user name character you want to set or change by moving the cursor by the (+) or (-) button.
Model Copy "MDL COPY" The contents of the currently selected model data can be copied to another model. Display "0'/ &23<" VFUHHQ XVLQJ WKH IROORZLQJ PHWKRG (MENU 2 ) (HOME screen) (MDL COPY screen) MENU-1 MENU-3 Select "MDL COPY" MENU-4 Using the model copy function 1 (Model #. selection) Select the copy destination model number with the (+) or (-) button. "01" ~ "40" are displayed. Model #. 01~40 The copy destination model # with the (+) or (-) button.
Model Reset "MDL RES" This function resets and initializes the contents of the currently selected model data. +RZHYHU WKH DGMXVWHU IXQFWLRQ $'-867(5 V\VWHP VHWWLQJ 6<67(0 DQG W\SH RI UHFHLYHU V\VWHP 5(&(,9(5 DUH QRW LQLWLDOL]HG Display "0'/ 5(6" VFUHHQ XVLQJ WKH IROORZLQJ PHWKRG (MENU 2 ) (HOME screen) (MDL RES screen) MENU-1 MENU-3 Select "MDL RES" MENU-4 Using the model reset function 1 (Model reset execution) Press the (JOG) button for approximately 1 second.
Data Transfer "MDL TRANS" This function copies the model memory data of one T4PM to another T4PM. Connect WKH FRPPXQLFDWLRQ SRUW RI ERWK 7 30V ZLWK WKH RSWLRQDO '6& FDEOH )RU XSGDWLQJ WUDQVPLWWHU ZLWK &,8 Note: ,I WKH 7 30 EDWWHU\ YROWDJH GURSV WKH GLVSOD\ VZLWFKHV WR ORZ EDWWHU\ GLVSOD\ 7KHUHIRUH XVH WKLV IXQFWLRQ ZKHQ WKHUH LV DPSOH EDWWHU\ FDSDFLW\ UHPDLQLQJ Note: 6LQFH WKH UHFHLYLQJ VLGH ZULWHV WKH QHZ FRQWHQWV RI WKH FXUUHQWO\ VHOHFWHG PRGHO PHPRU\ DOZD\V FKHFN WKH PRGHO QXPEHU
2 (Select the setting item ) Select "MODE" by moving the (JOG) button up or down, and select the transfer side and receiving side using the (+) or (-) button. "75$1" 'DWD WUDQVIHU VLGH "5(&9" 'DWD UHFHLYLQJ VLGH 3 Mode selection "TRANSFER" "RECEIVE" Setup item selection - Select by (JOG) button up or down operation. Mode change button - Use the (+) and (-) buttons to make adjustments.
Fail-safe Function "FAIL SAFE" (All channel) Fail-safe Mode (F/S) 7KLV IXQFWLRQ PRYHV HDFK VHUYR WR D SUHVHW SRVLWLRQ ZKHQ WKH UHFHLYHU FDQQRW UHFHLYH the signals from the transmitter for some reason. 7KH IDLO VDIH GDWD LV WUDQVIHUUHG IURP WKH WUDQVPLWWHU WR WKH UHFHLYHU VHFRQGV DIWHU WKH WUDQVPLWWHU SRZHU ZDV WXUQHG RQ 7KH GDWD LV WUDQVIHUUHG HYHU\ VHFRQGV DIWHU WKDW %H FDUHIXO EHFDXVH QRUPDOO\ WKH WUDQVPLWWHU SRZHU LV WXUQHG RQ ¿ UVW DQG WKH UHFHLYHU SRZHU LV WXUQHG RQ QH[W DQG WKH GDWD LV
Fail-safe mode selection FAIL SAFE screen (Preparation) - Select the channels "MODE" to be set by moving the (JOG) button up, down, left or right. 1 (Mode selection) Select the mode by (+) or (-) button. (Each channel can be individually set.) 2 When finished with the setting, return to the MENU screen by pressing the (END) button. When setting fail-safe, set the servo position by the following method.
S.BUS Link Function "SX LINK" 7KLV LV D VSHFLDO IXQFWLRQ ZKLFK DOORZV )XWDED 6 %86 6 %86 VHUYR SDUDPHWHU FKDQJHV WR EH VHW E\ WKH 7 30 WUDQVPLWWHU +RZHYHU VRPH GDWD FKDQJHV UHTXLUH D 3& DQG 6 /LQN VRIWZDUH 7KHUH DUH WZR ZD\V WR VHW )XWDED 6 %86 6 %86 VHUYR GLUHFWO\ E\ FRQQHFWLQJ LW WR WKH FRPPXQLFDWLRQ SRUW RI WKH WUDQVPLWWHU DQG ZLUHOHVVO\ VHWWLQJ LW ZLWK WKH VHUYR VWLOO FRQQHFWHG WR WKH UHFHLYHU :KHQ VHWWLQJ ZLWK ZLUHV SOHDVH XVH RSWLRQDO H[WHQVLRQ FRUG IRU VHUYR DV QHFHVVDU\
Connection between wired transmitter and servo Dual servo extension cord Connecting S.BUS/S.BUS2 servo and battery to the transmitter Communication port. Battery Connection between wireless receiver and servo W-CH: CH2 W-CH: CH1 Servos connected to Ch3 / Ch4 of the receiver can not be set wirelessly. 'LVSOD\ 6 %86 6; VFUHHQ XVLQJ WKH IROORZLQJ PHWKRG (MENU 2 ) (HOME screen) (S.BUS SX screen) MENU-1 MENU-3 Select "S.BUS SX" Setup item READ: Servo’s data read. WRITE: Writing the data to servo.
2 Execute this function to read the connected servo type and the data currently set at the servo. Select the setting item "ACCE" by moving the(JOG) button up or down,and select the reading method with (+) or (-) button. :LUHG &20 :LUHOHVV : /(6 COM W-LES For wireless, move the cursor to the setting item "W-CH" and select the servo connection channel with the (+) or (-) button. -ChanneO VHUYR &+ -ChanneO VHUYR &+ Select the setting item "MODE" by moving the(JOG) button up or down.
Display data list 1 The type and data of the loaded servo are displayed. Since there are page two setting items, change the page as follows. The servo ID Displays the ID of the servo whose parameters are to be read. Servo model name page 1 Setup item selection Select by the (JOG) button. The item indicated by the reverse displayed cursor is selected. When the connected servo type is not compatible with the SR mode, "----" is displayed.
Servo function setup 1 Select the setting item by moving the (JOG) button. Set the value by (+) and (-) button. SMOT (Smoother) This function makes servo operation smooth. Set it according to your taste. Normally set it to "ACT". Set it to "INH" when you want especially quick operation. When the smoother function is set to "ACT" and the servo is operated, the distance up to the target position is changed in steps so movement is smooth. DEAD (Dead band) The dead band angle at stopping can be specified.
BSTM (Boost/-N/OFF) OFF: It is the boost ON at the time of low-speed operation. (In the case of usual) ON: It is always the boost ON. (When quick operation is hope). BOST (Boost) The minimum current applied to the internal motor when starting the servo can be set. Since a small travel does not start the motor, it essentially feels like the dead band was expanded. The motor can be immediately started by adjusting the minimum current which can start the motor.
ESC Link Function "MC LINK" 7KLV LV D VSHFLDO IXQFWLRQ ZKLFK OHWV \RX VHW WKH FRQWHQWV RI WKH /LQN VRIWZDUH ZKLFK SHUIRUPV )XWDED HOHFWURQLF PRWRU VSHHG FRQWUROOHU (6& 0& &5 0& &5 0& &5 0& & 0& & 0& &5 HWF YDULDEOH IUHTXHQF\ DQG RWKHU GDWD FKDQJHV DW WKH 7 30 WUDQVPLWWHU +RZHYHU VRPH GDWD FKDQJHV UHTXLUH D 3& DQG /LQN VRIWZDUH 7KLV IXQFWLRQ LV XVHG E\ FRQQHFWLQJ WKH (6& GLUHFWO\ WR WKH WUDQVPLWWHU 7KH 7 30 SRZ HU VZLWFK LV XVHG DW WKH GLVSOD\ VLGH 8VH WKH YDUL
Using the ESC Link function (Preparation) -Connect the T4PM and ESC in accordance with the connection diagram, and connect the battery to ESC. 1 Display the MC LINK function screen in the above manner. 2 (ESC read) Execute this function to read the connected ESC type and the data currently set at the ESC. Select the setting item "MODE" by moving the (JOG) button up or down. Select "READ" by (+) or (-) button, and press the (JOG) button. &203/(7( EOLQNV RQ WKH VFUHHQ DQG WKH (6& W\SH DQG FXUUH
ESC function setup (MC601/602/850/851C/401/402/950CR) 1Select the setting item by moving the (JOG) button up or down. Set the value by (+) and (-) button. The currently set item is displayed here. Setup item selection - Select by the (JOG) button. Adjustment buttons - Use the (+) and (-) buttons to make adjustments. - Return to the initial value by pressing the (+) and (-) buttons simultaneously (approx. 1 sec). The item indicated by the reverse displayed cursor is selected.
LBP-(LOW BATTERY VOLT) 2.5V~6V DBA-(DEAD BAND) ±2μs~±50μs 2.5V~7.5V for MC950CR Same as Link software Dead Band. This sets the range (neutral point range) over which the ESC does not respond to transmitter throttle operation. The larger the set value, the wider this range. Same as Link software Low Bat Protection.
ESC function setup (MC940CR, MC960CR) 1Select the setting item by the (JOG) button up or down. Setup item selection - Select by the (JOG) button. Set the value by (+) and (-) button. Operate the following (JOG) button and switch between Page 1 and Page 2 of the setup screen. Adjustment buttons - Use the (+) and (-) buttons to make adjustments. - Return to the initial value by pressing the (+) and (-) buttons simultaneously (approx. 1 sec).
"Min", which sets the frequency when the load is small, is set to the high frequency side (large value) when extension is desired after straightaways and curves. "MAX", which sets the frequency when the load is large, is set to the high frequency side (large value) when you want to suppress the rise from low speed and when motor heating and commutator roughness are sensed.
Page 1 TBM-(TURBO MODE) OFF /LV1 /LV2 Same as Link software Turbo Mode. This function sets the turbo mode. More power can be displayed by using the turbo mode. Depending on the setting, the motor and ESC may be damaged so make this setting carefully. (Note) When LAU (LEAD ANGLE USE) is off, lead angle setting will not operate even if set to LEV1 or LEV2.
LAU-(LEAD ANGLE USE) ON /OFF Same as Link software Lead Angle Use. This function is effective when TBM (Turbo Mode) is LEV1 or LEV2 and sets whether or not lead angle is used. This setting has priority over the TURBO MODE setting. When used in races in which the lead angle function is inhibited by the ESC, set this function to OFF. OFF : Lead angle function not used. ON : Lead angle used. LA-(LEAD ANGLE) 0~59deg Same as Link software Lead Angle.
Select TRIM Dial Function "TRIM DIAL" 6HOHFWLRQ RI WKH IXQFWLRQ WR EH SHUIRUPHG E\ WULPV DQG GLDO '7 '7 '7 '7 '7 '/ - The functions that can be assigned to dial and digital trim are listed on the next page.
DT1 DT4 DL1 DT2 DT3 DT5 Set table functions (DL1, DT1/DT2/DT3/DT4/DT5) Function name, etc Dual rate function ATL function Steering EXP Throttle EXP (Forward side) Throttle EXP (Brake side) Steering speed (Turn side) Steering speed (Return side) A.B.S. function (Return amount) A.B.S. function (Delay) A.B.S.
Select Switch Function "SWITCH" 6HOHFWLRQ RI WKH IXQFWLRQ WR EH SHUIRUPHG E\ WKH VZLWFKHV 6: 6: 6: DOWHUQDWH RSHUDWLRQ RSHUDWLRQ ZKLFK VZLWFKHV EHWZHHQ 21 DQG 2)) HDFK WLPH WKH VZLWFK LV SUHVVHG LV SRVVLEOH 125 1RUPDO 21 RQO\ ZKLOH SUHVVHG 2)) ZKHQ UHOHDVHG $/7 $OWHUQDWH 6ZLWFKHG EHWZHHQ 21 DQG 2)) HDFK WLPH SUHVVHG 6: 21 2)) GLUHFWLRQ FDQ EH UHYHUVHG 125 5(9 Display "6:,7&+" VFUHHQ XVLQJ WKH IROORZLQJ PHWKRG (MENU 3 ) (HOME screen) (SWITCH screen) MENU-1 MENU-2 Select "
SW1 SW2 Set table functions (SW1) Abbreviation used on setup screen Function name, etc NT-BRK Neutral brake function ON/OFF ABS A.B.S function ON/OFF IDLE Idle up function ON/OFF PRGMIX Program mixing function ON/OFF TH-OFF Throttle off (engine cut) function ON/OFF CH3 Channel 3 CH4 Channel 4 GYRO Switching GYRO mode OFF Not used Set table functions (SW2) Function name, etc Neutral brake function ON/OFF ABS A.B.
Steering Mixing "STR MIX" (Steering, 4th channel system) This mixing function uses 2 servos to individually control the left and right steering. /HIW DQG ULJKW VWHHULQJ FDQ EH VHW LQGHSHQGHQWO\ VR VPRRWK FRUQHULQJ LV SRVVLEOH The right side steering servo or the left side steering servo connects to receiver CH1 DQG WKH RWKHU VLGH FRQQHFWV WR UHFHLYHU &+ 7KH FKDQQHO WR ZKLFK WKH OHIW DQG ULJKW VHUYR FRQQHFWV LV QRW VSHFL¿ HG $IWHU WKH OHIW DQG ULJKW VHUYRV DUH DGMXVWHG LQGLYLGXDOO\ $F
Steering mixing adjustment 1 (Steering mixing function ON/OFF) Select the setting item "MODE" by moving the (JOG) button up or down. Set the function by pressing the (+) or (-) button. "INH" )XQFWLRQ 2)) "$&7" )XQFWLRQ 21 Function ON/OFF (MODE) INH, ACT Select button - Select with the (+) or (-) buttons. :KHQ " (6&!,1+ " LV GLVSOD\HG WKH 675 0,; FDQQRW EH XVHG LI WKH '8$/ (6& function is not set to "INH". :KHQ " &36!,1+ " LV GLVSOD\HG WKH 675 0,; FDQQRW EH XVHG LI WKH &36 IXQFWLRQ LV not
Brake Mixing "BRAKE MIX" (Throttle, 3rd /4th channel system) 7KLV IXQFWLRQ LV XVHG ZKHQ WKH IURQW DQG UHDU EUDNHV PXVW EH DGMXVWHG LQGHSHQGHQWO\ VXFK DV RQ D VFDOH *3 FDU 7KLV PL[LQJ XVHV WKH QG &+ IRU WKH UHDU EUDNHV DQG WKH UG RU WK &+ IRU WKH IURQW EUDNHV RU FRQWUROV WKH IURQW EUDNHV ZLWK WKH UG &+ DQG WK &+ VHUYRV RU FRQWUROV WKH QG &+ E\ LQGHSHQGHQW WKURWWOH DQG FRQWUROV WKH UHDU DQG IURQW EUDNHV ZLWK WKH UG &+ DQG WK &+ CH3 CH2 or CH4 Front Brake CH3 Rear Brak
Brake mixing adjustment 1 (Brake mixing function ON/OFF) Select the setting item "MODE" of for CH3 brake and "MODE" of for CH 4 brake by moving the (JOG) button up or down, and use the (+) or (-) buttons to set the function to the "ACT" state. Function ON/OFF (MODE) INH, ACT Select button - Select with the (+) or (-) buttons. "INH" )XQFWLRQ 2)) "$&7" )XQFWLRQ 21 :KHQ " :6!2)) " LV GLVSOD\HG EHORZ &+ !$%6 WKH &+ EUDNH FDQQRW EH XVHG LI WKH :6 IXQFWLRQ LV QRW VHW WR "2))".
Gyro Mixing "GYRO MIX" (Steering system) 7KLV IXQFWLRQ LV D UHPRWH JDLQ IXQFWLRQ ZKLFK DGMXVWV WKH VHQVLWLYLW\ RI WKH )XWDED FDU UDWH J\UR DW WKH 7 30 VLGH DQG LV PL[LQJ WKDW XVHV WKH UG &+ WR DGMXVW WKH J\UR VHQVL tivity. :KHQ XVLQJ WKH 7 30 E\ VZLWFKLQJ WKH $9&6 DQG QRUPDO PRGHV XVH 6: RU 6: ZLWK WKH IXQFWLRQ VHOHFW VZLWFK IXQFWLRQ SDJH )RU D GHVFULSWLRQ RI WKH FDU UDWH J\UR PRXQWLQJ PHWKRG DQG KDQGOLQJ UHIHU WR WKH UDWH gyro instruction manual.
Gyro mixing adjustment (Preparation) - Refer to the gyro instruction manual and connect the gyro to the receiver. When using remote gain, connect gyro sensitivity adjustment to the 3rd CH of the receiver. - When using gyro mixing by switching between the NORM (normal) and AVCS modes, use the function select switch function (page 92) to set the switch to be used.
4WS Mixing "4WS" (Steering, 3rd channel system) 7KLV IXQFWLRQ FDQ EH XVHG ZLWK FUDZOHUV DQG RWKHU :6 W\SH YHKLFOHV ,W LV PL[LQJ ZKLFK XVHV WKH VW &+ WR FRQWURO WKH IURQW VLGH VWHHULQJ DQG WKH UG &+ WR FRQWURO WKH rear side steering. 2)) IURQW VLGH RQO\ UHYHUVH SKDVH VDPH SKDVH UHDU VLGH RQO\ DQG RWKHU :6 W\SH VZLWFKLQJ LV XVHG E\ VHOHFWLQJ 6: ZLWK WKH IXQFWLRQ VHOHFW VZLWFK IXQFWLRQ SDJH ,I QRW VHOHFWHG 12 6:! LV GLVSOD\HG 7KHUHIRUH VHOHFW 6: Setting S
1 (4WS type selection) Select the setting item "MODE" by moving the (JOG) button up or down. Use the (+) or (-) and set the function to the "ON" or "OFF" state. "INH" )XQFWLRQ 2)) IURQW RQO\ "2TYP" )URQW VLGH RQO\ UHYHUVH SKDVH VZLWFKLQJ "3TYP" )URQW VLGH RQO\ UHYHUVH SKDVH DQG VDPH SKDVH VZLWFKLQJ "4TYP" )URQW VLGH RQO\ UHYHUVH SKDVH VDPH SKDVH DQG UHDU VLGH RQO\ VZLWFKLQJ :KHQ " *<52 0,; $&7 → ,1+ " LV GLVSOD\HG WKH :6 FDQQRW EH XVHG LI WKH *< 52 0,; IXQFWLRQ LV QRW VHW WR "INH".
Dual ESC Mixing "DUAL ESC" (Throttle system) 7KLV IXQFWLRQ LV PL[LQJ XVHG ZLWK FUDZOHUV DQG RWKHU :' W\SH YHKLFOHV DQG XVHV WKH 2nd CH to control the front motor controller and the 4th CH to control the rear motor controller. )URQW GULYH RQO\ UHDU GULYH RQO\ RU ERWK IURQW DQG UHDU GULYH FDQ EH VHOHFWHG XVLQJ DQ\ SURJUDPPHG '7 GLJLWDO WULP EXWWRQ Setting Special Mixes :KHQ WKH WK &+ LV VHW WR $&7 E\ %UDNH 0L[LQJ SDJH RU ZKHQ 6WHHULQJ PL[ LQJ SDJH DQG &36 0L[LQJ SDJH DUH XVHG WK
The programmed DT button is used to select the drive type as shown in the figure below. Rear rate (RATE) 0 ~ 120 Initial value:100 2 (Rear side travel adjustment) Select the setting item "RATE" by moving the (JOG) button up or down. Use when applying a rotation difference to the front and rear wheels by adjusting the rear (CH4) motor controller travel with the (+) or (-) button. 3 (Mix mode setting) Select the setting item "MXMD" by moving the (JOG) button up or down.
CPS Mixing "CPS MIX" 7KLV IXQFWLRQ FRQWUROV WKH )XWDED &36 FKDQQHO SRZHU VZLWFK 1RUPDOO\ ZKHQ XVLQJ WKH &36 XQLW WR RSHUDWH YHKLFOH OLJKWLQJ V\VWHPV WKH &36 XQLW ZLWK /(' FRQQHFWHG LV FRQQHFWHG WR D YDFDQW VZLWFK FKDQQHO DQG WKH /('V DUH WXUQHG RQ DQG RII E\ VZLWFK ZKLOH WKH YHKLFOH LV UXQQLQJ +RZHYHU ZKHQ WKH &36 PL[LQJ &36 0,; IXQFWLRQ LV XVHG WKH /(' FDQ EH WXUQHG RQ DQG RII DQG À DVKHG LQ VWHS ZLWK VWHHULQJ DQG WKURWWOH RSHUDWLRQ DV ZHOO DV EHLQJ WXUQHG RQ
1 (Control system setup) Select the setting item "CTRL" by moving the (JOG) button up or down. Use the (+) or (-) button and select the function. )XQFWLRQ 2)) "INH" "&+ )81&" 21 2)) E\ VZLWFK VHW DW WKH WK &+ "STR NT" 21 DW VWHHULQJ QHXWUDO "STR END" 21 DW ERWK VLGHV RI VWHHULQJ "THR NT" 21 DW WKURWWOH QHXWUDO "7+5 ):'" 21 DW WKURWWOH IRUZDUG VLGH "7+5 %5." 21 DW WKURWWOH EDFN EUDNH VLGH "7+ 17 %.
Programmable Mixing "PROG MIX" (All channels) 7KLV IXQFWLRQ DOORZV \RX WR DSSO\ PL[LQJ EHWZHHQ VWHHULQJ WKURWWOH FKDQQHO DQG channel 4.
2 (Master channel) Select setup item "MST" by moving the (JOG) button up or down, and select the master channel by pressing the (+) or (-) button. These setup items are different depending on the master channel. Upper side : LEFT / FWRD / UP Lower side : RGHT / BRAK / DOWN Channel selection (MST) STR, THR, CH3, CH4 Initial value: STR Select button - Select with the (+) or (-) buttons.
Timer Function "TIMER" 8VH WKH WLPHU E\ VHOHFWLQJ RQH RI WKH WKUHH WLPHUV 83 7,0(5 '2:1 7,0(5 DQG /$3 7,0(5 Display "TIMER" VFUHHQ XVLQJ WKH IROORZLQJ PHWKRG (MENU 4 ) (HOME screen) (TIMER screen) MENU-1 MENU-2 Select "TIMER" MENU-3 TIMER screen UP TIMER FUEL DOWN TIMER LAP TIMER UP TIMER function Function 8S WLPHU IXQFWLRQ 7KLV IXQFWLRQ FDQ EH XVHG WR FRXQW WKH WLPH EHWZHHQ VWDUW DQG VWRS etc. 7KH WLPHU UHSHDWHGO\ VWDUWV DQG VWRSV HDFK WLPH WKH VZLWFK LV SUHVVHG DQG DFFXPXODWHV WKH
FUEL DOWN TIMER function )XHO GRZQ WLPHU IXQFWLRQ - This function is primarily used to check the refueling time of a gasROLQH FDU 7KH UHPDLQLQJ WLPH LV GLVSOD\HG (DFK WLPH WKH VZLWFK LV SUHVVHG WKH WLPHU LV UHVWDUWHG DQG WKH VHW WLPH LV UHVHW 7KH VWDUW WLPH EHFRPHV WKH DODUP VHW WLPH :KHQ FRXQWHG GRZQ WR PLQXWH VHFRQG WKH GRZQ WLPHU EHFRPHV DQ XS WLPHU 7KH GRZQ WLPHU FDQ EH LQLWLDOO\ VWDUWHG E\ WKURWWOH WULJJHU 7KH SDVVLQJ RI WLPH LV LQGLFDWHG E\ VRXQGLQJ RI D
Timer screen Timer selection First, select the type of timer at the "TYPE" item. The setup screen varies depending on the type of timer. This figure shows the UP TIMER setup screen.
Using the up timer (Preparation) Select the setting item "TYPE" by moving the (JOG) button up or down. Press the (+) or (-) button and select "UP". Adjustment buttons - Use the (+) and (-) buttons to make adjustments. - Press the (+) and (-) buttons simultaneously (approx. 1 sec) to return to the HOME screen. 1 (Alarm time setting) 2 (Timer start/stop operation) Start the timer by pressing the switch ("TIMER") set by function select switch function. Stop the timer with the same switch that starts it.
Using the fuel down timer (Preparation) Select the setting item "TYPE" by moving the (JOG) button up or down. Press the (+) or (-) button and select "DOWN". Adjustment buttons - Use the (+) and (-) buttons to make adjustments. - Press the (+) and (-) buttons simultaneously (approx. 1 sec) to return to the HOME screen. 1 (Alarm time setting) Select the setting item "ALRM" by moving the (JOG) button up or down. Set the alarm time with the (+) or (-) button.
Using the Lap timer (Preparation) Select the setting item "TYPE" by moving the (JOG) button up or down. Press the (+) or (-) button and select "LAP". 1 (Alarm time setting) Select the setting item "ALRM" by moving the (JOG) button up or down and set the alarm time with the (+) and (-) buttons. Adjustment buttons - Use the (+) and (-) buttons to make adjustments. - Press the (+) and (-) buttons simultaneously (approx. 1 sec).
Lap List "LAP LIST" 7KH ODS OLVW LV GLVSOD\HG ZKHQ FKHFNLQJ WKH ODS PHPRU\ GDWD ODS WLPHV PHPRUL]HG E\ ODS WLPHU SDJH RSHUDWLRQ $IWHU WKH ODS WLPHU VWDUWV WKH ODS WLPHV DUH PHPRUL]HG VHTXHQWLDOO\ HDFK WLPH WKH VZLWFK LV RSHUDWHG ,I WKH WLPHU LV VWRSSHG DIWHU WKH VHW $/50 WLPH KDV HODSVHG WKH ¿ QDO ODS WLPH LV PHPRUL]HG DQG WKH WRWDO WLPH DIWHU WKH ODVW ODS LV DXWRPDWLFDOO\ ZULWWHQ :KHQ WKH WLPHU ZDV VWRSSHG EHIRUH WKH VHW $/50 WLPH KDV HODSVHG WKH WRW
Telemetry "TELEMETRY" :LWK WKH WHOHPHWU\ V\VWHP WKH UXQQLQJ VWDWXV FDQ EH GLVSOD\HG DW WKH WUDQVPLWWHU DQG also recorded as a data log by mounting various sensor units to the chassis. 7KH 7 30 GLVSOD\V IRXU NLQGV RI LQIRUPDWLRQ RQ WKH +20( VFUHHQ UHFHLYHU SRZHU VRXUFH EDWWHU\ YROWDJH H[WHUQDO SRZHU VXSSO\ GULYH EDWWHU\ YROWDJH VSHHG DQG WHP perature. 7KH WHOHPHWU\ IXQFWLRQ LV FRPSDWLEOH ZLWK RQO\ WKH 7 )+66 V\VWHP 7KH WHOHPHWU\ IXQFWLRQ UHTXLUHV D FRUUHVSRQGLQJ UHFHLYHU 5
Connection diagram voltage Info Power battery voltage is displayed at the transmitter. Voltage Sensor Info Transmitter Temperature Sensor HUB Signal Info Info RPM Sensor Switch HUB Info T-FHSS Receiver Connect to S.BUS2 Connector Battery voltage is displayed at the transmitter. Temperature Sensor (SBS-01T) Temperature Sensor (SBS-01TE) RPM Sensor (SBS-01RM) Brushless motor RPM Sensor (SBS-01RB) Voltage Sensor (SBS-01V) Current Sensor (SBS-01C) Telemetry Function ON/OFF 7KH WHOHPHWU\ GDWD FDQ
Display "7(/(0(75<" VFUHHQ XVLQJ WKH IROORZLQJ PHWKRG (TELEMETRY screen) (MENU 4 ) (HOME screen) MENU-1 MENU-2 MENU-3 Select "TELEMETRY" Telemetry function ON/OFF 1 Select the setting item "MODE" by moving the (JOG) button. Set the function by pressing the (+) or (-) button. Function ON/OFF (MODE) Select button - Select with the (+) or (-) buttons. "2))" )XQFWLRQ 2)) )XQFWLRQ 21 (DFK WHOHPHWU\ VHQVRU "RX" "0& " )XQFWLRQ 21 (6& 0& &5¶V LQIRUPDWLRQ 0& &5 LV DYDLODEOH RQO\ LQ WKH -DSDQH
Telemetry Sensor Setting $Q DXGLEOH DODUP FDQ EH JHQHUDWHG E\ WKH 7 30 IURP WKH GDWD IURP D WHOHPHWU\ VHQVRU 7KLV VHWWLQJ VHWV DODUP 21 2)) DQG WKH DODUP FRQGLWLRQV Setting the receiver power supply voltage (Preparation) MODE: RX (Page 1) Select the setting item "RX BATT" by moving the (JOG) button up or down, and display the receiver power supply voltage screen by pressing the (JOG) button.
Setting the temperature (Preparation) MODE: RX (Page 1) Select the setting item "TEMP" by moving the (JOG) button up or down, and display the temperature screen by pressing the (JOG) button. 1 (Select Celsius or Fahrenheit) Select the setting item "UNIT" by moving the (JOG) button up or down, and select Celsius or Fahrenheit temperature display with the (+) button or (-) button.
Setting the current sensor (Preparation) MODE: RX (Page 2) (Current drive battery electric current) Select the setting item "CURRENT" by moving the (JOG) button up or down, and display the external power supply current screen by pressing the (JOG) button. 1(Setting of each item) Select the setting item "ALRM" by moving the (JOG) button up or down., and set alarm ON/OFF with the (+) button or (-) button. "2))" $ODUP 2)) "21" $ODUP 21 E\ WKH VSHFL¿ HG FXUUHQW 2(Setting the external power supply volta
(Current drive battery capacity ) Select the setting item "CAPACITY" by moving the (JOG) button up or down, and display the external power supply capacity screen by pressing the (JOG) button. 1(Setting of each item) Select the setting item "ALRM" by moving the (JOG) button up or down., and set alarm ON/OFF with the (+) button or (-) button. “2))” $ODUP 2)) “21” $ODUP 21 E\ D YROWDJH GURS EHORZ WKH VSHFL¿ HG YROWDJH Alarm ON/OFF ON, OFF - Select with the (+) or (-) buttons.
Log Setting Start/Stop The data from a telemetry sensor can be saved to the T4PM as a data log. Since the daWD LV VHTXHQWLDOO\ XSGDWHG ZKHQ GDWD ORJJLQJ LV SHUIRUPHG WKH ROG GDWD LV HUDVHG 2QO\ one set of data is saved.
2 (Recording cycle setting) Select the setting item "CYCL" by moving the (JOG) button up or down, and set the data acquisition interval from a minimum 0.1 second to a maximum 60 seconds with the (+) button or (-) button. The maximum recordable time set by CYCL is displayed at END TIME shown below. 3 (Count alarm ON/OFF) Select the setting item "ALRM" by moving the (JOG) button up or down. To sound an electronic beep at each log count, set "ALRM" to ON with the (+) button or (-) button.
Log Data List 7KH ORJ GDWD OLVW FDQ EH FDOOHG ZKHQ FKHFNLQJ WKH ORJ GDWD PHPRUL]HG E\ ORJJLQJ RSHU DWLRQ SDJH 7KH PD[LPXP ORJ GDWD LV XS WR FRXQWV Example: Receiver power supply voltage log list screen. Displays the type of log data. Displays the log data elapsed time. Displays the data Receiver power supply voltage. Receiver power supply voltage log.
Adjuster "ADJUSTER" 6WHHULQJ ZKHHO DQG WKURWWOH WULJJHU QHXWUDO SRVLWLRQ DQG VHUYR RSHUDWLQJ DQJOH FRUUHF WLRQ FDQ EH DSSOLHG 7KLV LV XVHG ZKHQ D PHFKDQLFDO RIIVHW KDV RFFXUUHG IRU VRPH UHD son. +RZHYHU ZKHQ FRUUHFWLRQ LV PDGH WKH VHW YDOXH RI DOO WKH VHWWLQJ IXQFWLRQV PXVW EH rechecked.
Throttle adjustment (Preparation) On the ADJUSTER screen, select the setting item "THROTTLE" by moving the (JOG) button up or down, and press the (JOG) button. 1 (Throttle neutral adjustment) In the neutral setup screen (fig-1) state, lightly pull the throttle trigger and then press the (JOG) button in without touching the trigger.
Infomation "INFO" 'LVSOD\ YHUVLRQ RI 7 30 SURJUDP ,' LQIRUPDWLRQ Display the ",1)2" VFUHHQ XVLQJ WKH IROORZLQJ PHWKRG (MENU 4) (HOME screen) (INFO screen) MENU-1 MENU-2 Select "INFO" Function MENU-3 Infomation "INFO" 127
Software Update :KHQHYHU LPSURYHPHQWV DQG QHZ IXQFWLRQV DUH DYDLODEOH WKH VRIWZDUH RI \RXU 7 30 UDGLR WUDQVPLWWHU FDQ EH XSGDWHG HDVLO\ RQOLQH IUHH RI FKDUJH 7KH ]LS ¿OH RI WKH XSGDWH GDWD ZLOO EH VKRZQ RQ RXU ZHEVLWH
Reference Ratings 6SHFL¿FDWLRQV DQG UDWLQJV DUH VXEMHFW WR FKDQJH ZLWKRXW SULRU QRWLFH Communication method: 2QH ZD\ RSHUDWLRQ V\VWHP Maximum operating range: P ([FHSW WKH 0,1,7 V\VWHP 2SWLPXP FRQGLWLRQ For safety: ) 6 % ) 6 ,' Transmitter T4PM-2.4G 7 )+66 65 7 )+66 6 )+66 V\VWHP ZKHHO W\SH FKDQQHOV Transmitting frequency band: 2.4GHz band RF power output: PZ (,53 Power requirement: 'U\ FHOO EDWWHU\ 3HQOLJKW [ 9 Current drain: P$ RU OHVV Transmission antenna: Ȝ GL SROH
Warning Displays Low Battery Alarm :KHQ WKH EDWWHU\ YROWDJH RI WKH WUDQVPLWWHU IDOOV EHORZ WKH XVDEOH UDQJH DQ DXGLEOH DODUP ZLOO VRXQG DQG " " ZLOO EH GLVSOD\HG RQ WKH /&' VFUHHQ LCD screen: (HOME screen) (MENU 1, 2, 3, 4 screen) (Function screen) Audible alarm: Continuous tone. Warning When a low battery alarm is generated, cease operation immediately and retrieve the model. If the battery goes dead while in operation, you will lose control.
MIX Warning LCD screen: :KHQ WKH SRZHU VZLWFK LV WXUQHG RQ ZKLOH WKH LGOH XS SUHVHW HQJLQH FXW RU QHXWUDO EUDNH IXQFWLRQ VZLWFK LV RQ DQ DXGLEOH DODUP ZLOO VRXQG DQG "0,; :$51" ZLOO EH GLVSOD\HG RQ WKH /&' :KHQ WKDW IXQFWLRQ VZLWFK LV WXUQHG RII WKH DODUP ZLOO stop.
Optional Parts 7KH IROORZLQJ SDUWV DUH DYDLODEOH DV 30 RSWLRQV 3XUFKDVH WKHP WR PDWFK \RXU DSSOL FDWLRQ )RU RWKHU RSWLRQDO SDUWV UHIHU WR RXU FDWDORJ Transmitter Battery :KHQ SXUFKDVLQJ D WUDQVPLWWHU EDWWHU\ XVH WKH IROORZLQJ )7 ) 9 P$K )7 ) 9 9 P$K %9 9 P$K /L)H EDWWHU\ 3OHDVH GR QRW XVH WKH WUDQVPLWWHU EDWWHULHV )7 ) % )7 ) 9 %9 as the receiver's battery. 6LQFH WKH WUDQVPLWWHU V EDWWHU\ KDV DQ RYHUORDG SURWHFWLRQ FLUFXLW WKH RXWSXW
When Using Four Dry Cell Batteries :KHQ ULEV LQ WKH EDWWHU\ FDVH DUH FXW E\ WKH IROORZLQJ PHWKRG Cut rib - Cut out the six ribs inside the battery case referring to the figure. - Insert the dry battery box 4P-SQ from the wiring side as shown. Caution When putting the dry battery box in the transmitter, please put it in the case from the side with wiring. Also, when removing, please remove from wiring side.
Warranty & Repair Service (In U.S.A) (Warranty) 5HDG WKH :DUUDQW\ FDUG :KHQ UHTXHVWLQJ ZDUUDQW\ VHUYLFH VHQG WKH FDUG RU VRPH W\SH RI GDWHG SURRI SXUchase. 7HFKQLFDO XSGDWHV DQG DGGLWLRQDO SURJUDPPLQJ H[DPSOHV FDQ EH IRXQG DW ZZZ IXWDEDXVD FRP (Information needed for repair) ,I DQ\ GLI¿FXOWLHV DUH HQFRXQWHUHG ZKLOH VHWWLQJ XS RU RSHUDWLQJ \RXU 7 30 SOHDVH FRQVXOW WKH LQVWUXFWLRQ PDQXDO ¿UVW )RU IXUWKHU DVVLVWDQFH \RX PD\ DOVR UHIHU WR \RXU KREE\ GHDOHU RU FRQWDFW WKH )XWDED 6HUYLFH &
1R SDUW RI WKLV PDQXDO PD\ EH UHSURGXFHG LQ DQ\ IRUP ZLWKRXW SULRU SHUPLVVLRQ 7KH FRQWHQWV RI WKLV PDQXDO DUH VXEMHFW WR FKDQJH ZLWKRXW SULRU QRWLFH 7KLV PDQXDO KDV EHHQ FDUHIXOO\ ZULWWHQ 3OHDVH ZULWH WR )XWDED LI \RX IHHO WKDW DQ\ FRUUHFWLRQV RU FODUL¿FDWLRQV VKRXOG EH made. • Futaba is not responsible for the use of this product. ©Copyright 2018. No part of this manual may be reproduced in any form without prior permission. The contents of this manual are subject to change without prior notice.
