User Manual

110
＜ Linkage menu ＞
A setup of the angle
on which the alarm
operates.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
The ON/OFF switch
of Speech is chosen.
The ON/OFF switch
of Speech is chosen.
Vibrator is chosen from
type1-3, and Inhibit.
Vibrator is chosen from
type1-3, and Inhibit.
↑ An upward arrow
indicates the alarm
will sound when the
temperature reaches
above your set value.
↑ An upward arrow
indicates the alarm
will sound when the
angle reaches above
your set value.
↓ A downward arrow
indicates the alarm
will sound when the
temperature reaches
below your set value.
↓ A downward arrow
indicates the alarm
will sound when the
angle reaches below
your set value.
Initial value: ↑ +180.0° ↓ -180.0°
Adjustment range -180.0°  +180.0°
( ↑ Limit ≧ ↓ Limit)
Telemetry : Servo sensor [Temperature] [Angle]
*Servo sensor must be installed in the aircraft.
ŏ Select [Servo sensor] in the Telemetry
screen and access the setup screen shown
below.
A setup of the
temperature on which
the alarm operates.
Initial value: ↑ 115℃↓ -10℃
Adjustment range -10℃ 115℃
( ↑ Limit ≧ ↓ Limit)
ŏReturn to
Linkage menu
● Temperature
● Angle