User Manual
G
OVERNOR
B
ASIC
S
ETTING
46
(5) Stick switch
[default: 30%]
The governor can be activated by throttle
stick position. Move the throttle stick to the
ON POSITION AND PUSH 3%4 KEY THE ON POINT IS
MEMORIZED7HENYOUPUSHTHE23%4KEYTHE
function is inhibited. When the governor on/off
switch is inhibited, the stick switch is automati-
cally turned on.
(4) Servo selection
[default: Analog]
Select the throttle servo type. Digital servos of-
fer the best response. The type is changed by
pushing data + or – key.
When governor is turned on and off by trans-
mitter throttle stick
The data is set so that the governor can be
turned on and off with the transmitter throttle
stick. The following describes this operation.
n
WARNING
j
This parameter must match the type of ser-
vo you are using. Incorrect setting may damage
the GY701 or the servo, possibly resulting in a
loss of control during flight.