User Manual

OVERNOR

XPERT

ETTING

(3) Revolution display mode

default: Rotor

This selects the revolution display mode for either

the main rotor or engine revolution. Pushing data+

or – key, the mode is changed.

(4) Operation response

default: Middle

This selects the governor operation response.

Select the best match for your engine type. Push-

ing data+ or – key, the mode is changed. Recom-

mended selection are, Middle-> glow engine,

Moderate-> gasoline engine, Quick ->Brushless

motor-.

(5) Governor gain

default: Moderate=30%,Middle=40%,Quick=60%

ranges: 10~100%

This sets the governor working gain. When the

operation response is changed, the governor gain

is automatically changed as default. The best gain

is the amount right before the revolution wagging

takes place. Pushing data+ or – key, the value is

changed.