User Manual

OVERNOR

XPERT

ETTING

(6) Throttle data mode

default: Optimize

This selects the throttle input operation. Pushing

data+ or – key, the mode is changed

Optimize:

GY701 sets the throttle input signal to optimum.

No need to consider the throttle curve setting on the

transmitter.

Fixed:

The ﬁxed throttle input is utilized related to the revo-

lution. It is recommended for electric motors.

Tx.Curve:

GY701 uses the exact throttle input from the trans-

mitter. The throttle curve setting on the transmitter

is required. When the Rev.Lmt mode is selected, this

mode should be selected.

(7) Revolution change up delay

default:

range:

∼

This sets the delay of the revolution from low

to high. Pushing data+ or – key, the value is

changed.

(8) Revolution down delay

default:

range:

∼