Users Manual Part 3

Optional Parts
78
Reference
Power off forgotten warning
If the T4PM is not operated for 10 minutes, an audible
alarm is sounded and
"
OPE WA R N
"
is displayed on the
screen. The audible alarm stops when the steering wheel,
throttle trigger, and any dial, switch, or edit button is op-
erated. If you are not going to use the transmitter, turn
the power off. (Setting can be reset at the system menu on
page 42.)
Audible alarm:
Tone sounds (7 times) and stops (repeated)
LCD screen:
MIX Warning
When the power switch is turned on while the idle-up, preset
(engine cut) or neutral brake function switch is on, an audible
alarm will sound and
"
MIX WARN
"
will be displayed on the
LCD. When that function switch is turned off, the alarm will
stop.
LCD screen:
Audible alarm:
Tone sounds (7 times) and stops (repeated)
The following parts are available as 4PM options. Purchase them to match your appli-
cation. For other optional parts, refer to our catalog.
Transmitter Battery
When purchasing a transmitter battery use the following:
FT2F1100 (6.6V/1100mAh) / FT2F1700V2 (6.6V/1700mAh) / 2100BV2 (6.6V/2100mAh)
LiFe battery
Please do not use the transmitter batteries ( FT2F1100B / FT2F1700V2 / 2100BV2) as the re-
ceiver's battery.
Since the transmitter's battery has an overload protection circuit, the output power will be shut
down when the high current load is applied. This may result in runaway or fatal crash.
Telemetry Sensor
Usable sensor options (As of December 2018)
Voltage Sensor (SBS-01V) / Temperature sensor (SBS-01T) / Temperature sensor (SBS-
01TE) / RPM Sensor (SBS-01RM) / RPM Sensor (SBS-01RB) (Brushless type) /
Current sensor (SBS-01C) / GPS sensor (SBS-01G)