Users Manual Part 3

Connect the communication port of both
T4PM with the optional DSC cord.
Communication port
Data is not interchangeable with another type of transmitter.
(HOME screen)
MENU-1
MENU-3
MENU-4
(MDL TRANS screen)
(MENU 2 )
Select
"MDL TRANS"
63
Function
Data Transfer "MDL TRANS"
This function copies the model memory data of one T4PM to another T4PM. Connect
the communication port of both T4PMs with the optional DSC cable (For updating
transmitter with CIU-3).
Note: If the T4PM battery voltage drops, the display switches to low battery display.
Therefore, use this function when there is ample battery capacity remaining.
Note: Since the receiving side writes the new contents of the currently selected model
memory, always check the model number before executing this function.
Data Transfer "MDL TRANS"
(Preparation)
- Connect the communication port of both transmitters with the
optional DSC cord.
- Turn on the power of both T4PMs. Select the model number of
the transfer side and the receiving side with the model select
function (page 59).
1
Display the data transfer function screen in the above manner.
Using the Data Transfer function
Display to
"
MDL TRANS
"
screen using the following method: